Receiver for 14mz transmitter
#1
Thread Starter
Join Date: Dec 2002
Location: Yuma,
AZ
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Receiver for 14mz transmitter
Need an additional receiver for my 14mz radio and the old ones I have are discontinued. What new receivers are compatable with the 14 mz transmitter?
Thanks
John Kruger
Thanks
John Kruger
#4
Cool. Then any, and all, current 2.4 FASST receivers will work.
These include:
R7104SB
R617FS
R7006SB
R6208SB
And few others that are better is using S.Bus.
Frankly, the R617FS is my all time favorite RX. Robust, small, and well proven.
Look here and focus in on receivers that do FASST. Your module will not work with a FASSTest only RX (telemetry).
https://www.futabarc.com/receivers/air.html
Here's the Futaba products page on TOwer:
https://www.towerhobbies.com/cgi-bin/wti0002p?M=FUT
Hope that helps.
These include:
R7104SB
R617FS
R7006SB
R6208SB
And few others that are better is using S.Bus.
Frankly, the R617FS is my all time favorite RX. Robust, small, and well proven.
Look here and focus in on receivers that do FASST. Your module will not work with a FASSTest only RX (telemetry).
https://www.futabarc.com/receivers/air.html
Here's the Futaba products page on TOwer:
https://www.towerhobbies.com/cgi-bin/wti0002p?M=FUT
Hope that helps.
#5
In addition, you need to remember when using the transmitter set to "7ch" mode, you only get failsafe on the throttle channel.
When using "Multi" mode, you get full failsafe options on all channels.
modtron
Oxford UK
When using "Multi" mode, you get full failsafe options on all channels.
modtron
Oxford UK