Bax, I need help. I looked in the manual and online and I can't remember how to assign a switch that will allow the both ailerons to deflect up when up elevator is applied past 50%. I want to use ths function for Harriers and such. I did this for another plane I had but I can't find the info again. Ohyea, I have the 9C radio.

You'll need to do two mixes, one for each channel. Use the following FAQ, but use the elevator channel instead of the throttle channel, and then each of the two aileron channels instead of the smoke channel. Decide which switch to use as the on/off switch, and set both mixes to that switch.

http://www.futaba-rc.com/faq/faq-9c-q520.html

Hope this helps.

Thanks Bax