Programming flaps on a Super 8
10-24-2002 | 06:34 PM
#1
Thread Starter
My Feedback: (15)
Programming flaps on a Super 8
Hi Ann Marie!! I did a search for this question but didnt find anything so here I am
I have the super8 and I have flaps on a 60 size warbird. Currently I have the flaps plugged into channel 5 (retract channel).Do I need to move the flaps to another channel in the rcvr/ its an 8 channel rcvr? I want to have the flaps operate off of the 3 position switch( I think its the "C" switch). I would like the flaps to be fully closed when the switch is all the way up, about 30 degrees of flaps when the switch is in the central location , and full flaps when the switch is all the way down.
Now I would also like to mix in some down elevator with the flaps. Is the previous setup going to work with the elevator mix?
Thanks for any help you could provide!!!!
John McGowan
I have the super8 and I have flaps on a 60 size warbird. Currently I have the flaps plugged into channel 5 (retract channel).Do I need to move the flaps to another channel in the rcvr/ its an 8 channel rcvr? I want to have the flaps operate off of the 3 position switch( I think its the "C" switch). I would like the flaps to be fully closed when the switch is all the way up, about 30 degrees of flaps when the switch is in the central location , and full flaps when the switch is all the way down.
Now I would also like to mix in some down elevator with the flaps. Is the previous setup going to work with the elevator mix?
Thanks for any help you could provide!!!!
John McGowan
10-24-2002 | 10:19 PM
#2
Senior Member
My Feedback: (2)
Joined: Jan 2002
Posts: 2,636
Likes: 0
Received 0 Likes
on
0 Posts
From: Tuscola,
IL
Programming flaps on a Super 8
John,
Please see the FAQ at www.futabarc.com/faq/faq-8u.html. the first 2 FAQs will give you exactly what you want. then just do a flap to elevator mix afterward to add your elevator.
Please see the FAQ at www.futabarc.com/faq/faq-8u.html. the first 2 FAQs will give you exactly what you want. then just do a flap to elevator mix afterward to add your elevator.
