Hi,

I have a FF6, with a 9c on order

I have an electric model, which draws very nearly the motors maximum rated current at full throttle.

What i'm trying to achieve is 90% throttle at max throttle stick, but by flicking a switch, override this to 100% throttle.

Could I do this with a Mix and use channel 5 as Throttle?

Regards,

Steve

Hi, Steve!

9C can do this easily. 6X cannot.

For 9C, do a throttle to throttle mix at -10%, on the high side only, with the desired switch as the trigger. This will give you your 90% when the switch is pulled, adn give you your 100% when the mix is off.

Thanks AnneMarie!

9C Radio arrived earlier this week. Programmed the mix as you suggest and it works a treat!

I didn't even need to look at the Manual!!

Setup 8 models, 4 being acros with complex mixes within an hour!

This is one great Radio!

Thanks again,

Steve