9C--how to activate idle ups?
04-05-2003 | 08:05 PM
#1
Thread Starter
Member
My Feedback: (1)
Joined: Dec 2002
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
From: Madison Heights, MI
9C--how to activate idle ups?
I just bought a 9C for my heli. How do I activate switch E to switch between normal and the idle up modes? I've progammed the pitch curves in them, but can't get the (NORMAL) indicator to change when I move the switch.
Thanks
Thanks
04-06-2003 | 09:09 AM
#2
Senior Member
Joined: Dec 2002
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
From: Guangzhou, CHINA
9C--how to activate idle ups?
I just discovered how to do this, but can not get my Logo10 model in Aerofly to give -ve pitch
so no inverted flight!!
Anyway.. go to advance heli menu thr-curve. Use the select button to go up to NORM and rotate the dial. IDL1 or 2 or 3 will show and then you can go down to MIX and change the INH to OFF. This then changes when you move the E switch. It enables the Thr and Pitch curves at the same time.
Jeff
so no inverted flight!!Anyway.. go to advance heli menu thr-curve. Use the select button to go up to NORM and rotate the dial. IDL1 or 2 or 3 will show and then you can go down to MIX and change the INH to OFF. This then changes when you move the E switch. It enables the Thr and Pitch curves at the same time.
Jeff
