Need Engine ID
01-19-2020, 12:54 PM
#2
Join Date: Jan 2004
Location: lake in the Hills,
IL
Posts: 977
Likes: 0
Received 14 Likes
on
14 Posts
It is hard to tell from just one picture.
However it looks to me like a:
CRRCPRO GP26R
If so it will need a little work to run right and long.
Major problems:
no pulse line to the crank case from the carb fuel pump.
no retainer for the big end connecting rod bearing
maybe a set of spacers on each side of the piston pin would help as well.
However it looks to me like a:
CRRCPRO GP26R
If so it will need a little work to run right and long.
Major problems:
no pulse line to the crank case from the carb fuel pump.
no retainer for the big end connecting rod bearing
maybe a set of spacers on each side of the piston pin would help as well.
