Twin 60 CC
1 Attachment(s)
Hi guys I was going to wait a while to show this after I had some numbers to post, but that will come in a week or so.
Here is my latest creation a 60 CC engine useing DLE cylinders and pistons. Mind now the engine will be fully polished and the cylinders either painter or powder coated when completed, but this will give a person the general idea. As it is the engine is weighing in at 3-1/2 lbs I was hoping to keep it under 4 complete with everything but I have my doubts. |
RE: Twin 60 CC
Very nice.;)
Milton |
RE: Twin 60 CC
I have just sent you a PM. Don't know if it will get thru w/problems on RCU lately.
|
RE: Twin 60 CC
Very nice, are you planning on taking any orders, or are you just dangling a carrot :):)
Karol |
RE: Twin 60 CC
Very, very cool. I've built several 50cc twins using Echo parts, but I got the crankcases from BME. (No longer available.) Wish I had the equipment to make crankcases.
Nice work, keep us posted. AV8TOR |
RE: Twin 60 CC
Beauty work!
|
RE: Twin 60 CC
As usual, very nice!:D it will be interesting to see how she runs.
|
RE: Twin 60 CC
what crank and bearings are you using? Have pics of crank? Is that 6061?
|
RE: Twin 60 CC
As a rule I get my bearings from USA bearings 10 at a time, the crank I made from 2 dle -30 cranks, it worked out very nice.
Hi Karol right now this is just a proto type, I have some high hopes but untill I see and hear it run and get some data accuired I don't have anything planned out for the future. I was up in the air about the width of the engine and was thinking about going with the 1/4-32 mini plugs, but for now I will run the CM-6 and go from there. |
RE: Twin 60 CC
Awesome!!! It was great speaking with you and I will have your mufflers on the way today!
|
RE: Twin 60 CC
1 Attachment(s)
Thanks Chad that will save me alot of time.
Thanks Guys for the kind words, Since there has been alot of intrest in the crank I decided to take a pic while I have the engine down. Nothing magic to it except getting it aligned so there is zero run out. What I did was cut the end off of one and added a disk in the middle, removed the original rod pins and replaced them with longer hardened metric dowel pins that would capture both the disk and crank. |
RE: Twin 60 CC
Cyberwolf, that sure is super nice work you have done on your 60cc Twin engine. I am in Florida now on vacation, but I check in here once in a while, nice to see a very neat project like yours. Best Regards, Capt,nhttp://www.rcuniverse.com/forum/js/f.../thumbs_up.gif
|
RE: Twin 60 CC
Very, very nice! I can't wait to hear it run and see how it does!
|
RE: Twin 60 CC
Very nice work. I've been hoping DLE would do something like this but as before, you beat them to the punch! I'll be anxiously awaiting to hear your test run results!
Sam |
RE: Twin 60 CC
1 Attachment(s)
HI guys /Gals Just a couple of pics to let you know I have not forgotton about this thing. I recieved my Mufflers from Taildragger RC today the CCRC pro was an exact fit to the DLE cylinders. I want to take a sec and thank Chad for a very fast shippment and some very nice item's. My ign has not landed yet but it should be here I hope tomorrow, I decided for now just to tackel one thing at a time and went with the standard CM-6 plug caps. That may change later on but for now it will get the engine running and see what I need to work on from there.
Richard. |
RE: Twin 60 CC
Richard... man that engine is sharp! The mufflers look great.. I am happy you like them and glad they fit right. Keep us updated on this beauty!!
|
RE: Twin 60 CC
Richard!! That is FReakin Awesome What does she weigh in at?
Doh read the first post man.... You think she'll turn a 24x8 That would be fantastic. |
RE: Twin 60 CC
I not going to predict anything untill the fat lady sings, she may yell her head off for this is done *L* The only thing that I know for a fact it has way more compression than any of my 55's or G-62 singles. Could be a good thing can't see why it wouldn't???
|
RE: Twin 60 CC
Looking Good
|
RE: Twin 60 CC
You've done some impressive machining there!
Last time I seen anything like that was from a trade show where they had a Mazak CNC lathe do some wild precision machining. If you and Umran........ DLE 111cc Auto Start System http://www.rcuniverse.com/forum/m_10..._1/key_/tm.htm .....were to collaborate together, what an awesome engine you two could create!!! |
RE: Twin 60 CC
Correct me if I am wrong, but you machine this manually, no CNC right?
|
RE: Twin 60 CC
ORIGINAL: Cyberwolf HI guys /Gals Just a couple of pics to let you know I have not forgotton about this thing. I recieved my Mufflers from Taildragger RC today the CCRC pro was an exact fit to the DLE cylinders. I want to take a sec and thank Chad for a very fast shippment and some very nice item's. My ign has not landed yet but it should be here I hope tomorrow, I decided for now just to tackel one thing at a time and went with the standard CM-6 plug caps. That may change later on but for now it will get the engine running and see what I need to work on from there. Richard. |
RE: Twin 60 CC
Again thank you.
Yes I use all manual machines. I have seen Urmans thread concerning both his engine and starting system, what can I say he does do some very nice work. I have gave some thought to a starting system, but never got it off the board to do anything with it. Besides Electricity and myself have never been the best of friends. Maybe some day when I feel that I really need something to start my engines I may look into it further. |
RE: Twin 60 CC
Richard only one word truly describes your latest creation .... AWESOME.
Karol |
RE: Twin 60 CC
First time I seen the pics with the blue heads. It makes it look even better Richard. Love it. :)
|
All times are GMT -8. The time now is 02:39 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.