Bud Nosen Mr. mulligan
#826
Join Date: Dec 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Bummer...
Well I found this thread three days ago and read thru all 800+ entries but it seems Steve fell off the face of the earth by the time I reached the end. So I looked him up and it seems he lost 'EVERYTHING" in a fire. I can only imagine that pain! An old time flyer who lives down the street from me lost everything to the Thomas Fire last year, our house was spared. So, so sorry for Steve and I hope no one was hurt. It was good to see a post from this year by him. I kinda felt a kinship after following his build. I really feel bad for him!
I have two Nosen kits that I bought over 30 (closer to 40?) years ago. The DGA-6 actually is die CUT (not crushed) but the list of materials was lunch for some long gone bug. It will be an interesting build. I'm not starting it until I get an engine. I'm looking at possibly a UMS 9-115 9 cylinder radial (same dimensions as the Evolution 9-99) but gas. Diameter is 10-1/4" and the cowl in the kit is 11-3/4". Not set on that, but it has to look and sound scale. One sure thing I took away from Steve's thread is - it won't be easy and it won't be quick.
I have two Nosen kits that I bought over 30 (closer to 40?) years ago. The DGA-6 actually is die CUT (not crushed) but the list of materials was lunch for some long gone bug. It will be an interesting build. I'm not starting it until I get an engine. I'm looking at possibly a UMS 9-115 9 cylinder radial (same dimensions as the Evolution 9-99) but gas. Diameter is 10-1/4" and the cowl in the kit is 11-3/4". Not set on that, but it has to look and sound scale. One sure thing I took away from Steve's thread is - it won't be easy and it won't be quick.
#827
Hello
I am building the Mulligan from Bud Nosen
I have the plans but no BHD - 1 former are really shown,anyone have a kit they can scan the formers from?
The Templateplans from Outerzone or Free Rc Plans sins a littel Wrong
The BHD-1 Former have mor gaps as one for the 1/4 Stringers
The BHD-1A Former have one Gap for 1/4 Stringer
I am searching scan from this Former.
Greetings Bernd
sorry for my bad englisch
I am building the Mulligan from Bud Nosen
I have the plans but no BHD - 1 former are really shown,anyone have a kit they can scan the formers from?
The Templateplans from Outerzone or Free Rc Plans sins a littel Wrong
The BHD-1 Former have mor gaps as one for the 1/4 Stringers
The BHD-1A Former have one Gap for 1/4 Stringer
I am searching scan from this Former.
Greetings Bernd
sorry for my bad englisch
The following users liked this post:
bignasdy (12-17-2021)
#829
#835
Hi to all - I just picked up a partially complete MM with some of the plan sheets. I don't have the windshield pattern and wondered if anyone would be able to scan a pic and send it along. Would really appreciate the help//Thanks
Nick
Wellington Florida
Nick
Wellington Florida
#836
Hi Nick,
I am about to get back into the kit I started and will have it available then if ya still need it.
I don't have it on hand at the moment.
I moved and the kit and all went back to the owner till I could set up shop. Almost done!
d
I am about to get back into the kit I started and will have it available then if ya still need it.
I don't have it on hand at the moment.
I moved and the kit and all went back to the owner till I could set up shop. Almost done!
d
#837
Thank you - appreciate the follow up
The following users liked this post:
bignasdy (12-22-2023)
#841
My Feedback: (6)
I got to say I have toyed with building a DGA-6 (Mr. Mulligan) or Joe Raspante's Snow White (converted to R/C), both are bigger than I want to build and store. My sweet spot is 1/5th scale, something in the 65" to 84" wingspan range. The same restrctions kept me away from Goldberg's Valkyre too.
The following users liked this post:
bignasdy (12-22-2023)
The following users liked this post:
bignasdy (12-23-2023)
The following users liked this post:
bignasdy (12-23-2023)
#849
The rescue of a Bud Nosen Mr Mulligan Kit - Maiden Flight
Just flew my Mr. Mulligan for the first time. Maiden went quite well. This site is not allowing me to post the url to the video, If you're interested in seeing the flight, search uTube using the title in this post Let me know what you think.