steve1mac

I never get any answers here.
I have asked for a canopy for a Cessna 337 since March with no response.

But you can try this other forum. This link will take you to a thread that gets response from a guy named Eric:

http://www.rcdiscuss.com/index.php/board,84.0.html

Good Luck!

Michel

Hi

I,m new here .

What I,m looking for is a conopy for a Zero fighter 90-120 . I,ve been watching the site for quite some time now and , even if I place an order , they never tell you exactly when it will come in . Is there any other way of getting a canopy for this aircraft ?

Thanks for looking

Michel

fishdeth

My Feedback: (2)

Good luck !

Michel

Hi

That bad huh ,............................ , would you please explane

egiraldo911

My Feedback: (3)

Hi, I have been looking for a servo mount for the Nitro Models Super Senior 60 - 80" airplane. Can you please help me out?

Thanks.

Eddie.

jesses151

My Feedback: (1)

Just a thought, try Hobby-Lobby.com and search there spare parts section. I've gotten lucky there before. Plus if your in doubt about a part on there web site you can always get a live person when you call them.
-Jesse

Drezed

I am looking for the main wing set for the FMS Rafale ( www.nitroplanes.com/rafale-edf-rc-jet.html ). I've had the plane for awhile, so I don't have the order#.

Thanks in advance
Jeff

smokey93

I need to order the following parts for my 50CC ULTIMATE

WHEEL PANTS
WING TUBE FOR BOTTOM WING
MAIN WHEEL SET

My original order # was YHST-17210252890263-60068
THE ORIGINAL DATE OF MY ORDER WAS 11/28/2008

http://www.nitroplanes.com/ul45giscrare.html

Mickey Ammons
4205 Battle Field Drive
Garner N.C. 27529

919-819-7406

[email protected]

aminklein

I just received the new large P-51 with electric retracts. It's a real nice airplane, solid, easy to assemble, and looks to be really durablehttp://www.nitroplanes.com/93a51-51-silver-rtf-24g-eretract.html. The electric retracts are great, and no adjustments are required. However, I notice that many of the spare parts for this new airplane are already out-of-stock. I'd like a 3-blade propeller, 2-blade propeller and 2-blade spinner. Do you know when they'll be back in stock? I don't have my order number because I already erased your e-mails. Thanks Art Minklein

http://www.nitroplanes.com/93a51-51-...-eretract.html

jw0847

I need the COWL for 2009 CMPro U.S. Navy T-34 Mentor 40

CMP T-34 50 Item# ARF-Parts_CMP_T34-COWL - has been out of stock for the past 4 or 5 months. It is for the[link=http://www.nitroplanes.com/new20cmunatm.html] 2009 CMPro U.S. Navy T-34 Mentor 40 [/link]


[link=http://www.nitroplanes.com/coforcmpt50.html]CMP T-34 50 Item# ARF-Parts_CMP_T34-COWL[/link]

bushwhacker

Hi John

hope this is the correct place as I urgently need a copy of the b25 manual as it was missing from the kit I bought at a show in UK. posted in missing manuals forum but had no reply. Email is [email protected].

http://www.nitroplanes.com/mibmi5271nig.html

Thanks Colin W

351wpwr

My Feedback: (1)

I need the right wing for the CMP Edge 540T 50CC airplane. Can this be ordered.

Michel

Hi

This form is worth exactly DIDDLY, NOTHING , NADA , WORTHLESS , POINTLESS , PRODUCT SUPPORT , IS RIGHT OUT THE WINDOW . And as for there chat service , if you didn,t buy it forget it . It,s like I was told ,............................ BEST OF LUCK , and you,d have a better chance at winning the lottery .

This form is totally useless , and I,m not the only one who feels this way about this company .

BTW ,........................... SAM ,........................... get another job

Michel

jw0847

There has been absolutely no response or even acknowledgment of this request - I would agree - poor or better put - non existent customer service.

hawkerone

My Feedback: (11)

I think they've abandoned this site some time ago.  They seem to be responding currently over at:

www.rcdiscuss.com

GuitarPlayer

Hey guys, don't hold your' breath!  These guys only care about the big sale.

pyhooya1

Hi John, I have posted on the regular forum. So I decided to write to you. I would like to know where I can get replacement parts for the Dynam A 10. I bought it from Nitro planes. Mainly I need the 6 bladed fans for the 64mm ducted fans.
order # yhst-17210252890263-138955
Or canI replace it with on from another company.The best I can come up with for information follows: Motor 3300 kv, shaft 3.10mm shaft motor dia outside 28.04mm. Fan outer dia 68mm inner 64mm 6 blade. Can I put a 7 blade unit on this motor the fan unit is the same and it takes aup to a 29mm motor.

arcticflyer

Any chance that the F-86 140 will be restocked? Thanks!

tgeerts

I purchased a plane a few weeks back first thing that happened is the reciever went out i used a different reciever and it worked fine in the model so the original reciever is bad it is on channel 52 would like a replacement. order number yhst-17210252890263


then the motor went out figured it had something to do with me so i purchased another the new motor was bad right out the box and would like a replacement as one coil is black and it smells terrible.
would like a replacement order number -yhst-17210252890263

Please let me know by tracking number when items are shipped thanks
Tim Geerts

charlesp

I need the cowl for a P51 Mustang (60 size) http://www.nitroplanes.com/mapmu6066rep.html cant seam to order it off the site thx

edwal07

I have the Ultimate 50cc made by FlyModel RC which I bought from you, Order Number 733838. I have finally started the build. However in the instructions there is an added page showing a tail wheel with springs. My kit had the tail wheel shown in the booklet. Which is the correct one? From their web page it shows the one with the springs is for 50 to 150cc and the one supplied is for 40-60 size planes. The elevator halves had only 2 holes in them for hinges when the book shows three, I doweled the old ones and redrilled for the three. The rudder only has 3 which seems awful little for such a large rudder, especially since the tail wheel and control linkage is at the bottom, I added another hinge about 1/2" from the bottom for more support. Also there are "many" joints and braces which have little or no glue on them. The front tri-braces on the front firewall were miss shaped and very little glue, one fell off with only a touch of screwdriver blade, the other had glue at the bottom and not the top.
This is a nice looking plane but needs some overview on production. I am doing a review on the plane and a DLA56 which will be the powerhouse. I would also like to know the availability of the yellow covering which would be used to seal the gap on the joining of the top wing and around the rudder where it fits to the fuse.
Thanks
Ed Waldrop

Black Drape

John

I have an extensively modified CMP Hellcat and have a lot of money tied up in it. I broke the wing beyond repair and would like to get a new wing kit for it. Is there any way to get one?
Thanks
Ron

fossoman

Any Chance of Getting A wing set for the Maxjet FA18 64MM Red Viper? Dont see any parts listed on the site I know its a kit but some spare parts would be nice.

wl7cpa

This is third request with no answer to date:

One more try....

Do you stock the wheel pants for the CMP Katana 120-140 size plane? They are too thin and crack very easily.

charlesp

thx for the offer ill take you up on it i am sure