|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
John... is there a replacement cowl for this plane available? or a suitable substitute? Nitro Models 53 Super Chipmunk
http://www.nitroplanes.com/such5258.html Thanks Curtis |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
John,
I sent you a PM yesterday re. wing hardware for an Ultimate 40. Thanks, Chris |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
John,
Got the parts today. Unfortenatly it was the wrong landing gear and pants. I believe what I got was for the 100 cc Suhkoi. The box was marked 50cc Sukhoi which is what I need. Let me know what you would like to do? ORIGINAL: nitrostaff1 item sent and thanks UPS 1ZX03V030398963292 John Nitro Planes ORIGINAL: sgoen yes it is ok to charge to the card on file. Not sure which one it is, but if it does not work pm me and I will give you a good card number. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I'm really sorry about this. Seems like all the long EZ are currently sold out at this moment. I was going to pull out a canard from a new kit but none is available for now.
John Nitro Planes ORIGINAL: muidaq Yellow would do. My order number is yhst-17210252890263-60885 ORIGINAL: nitrostaff1 If i have a yellow would you take it? John Nitro Planes ORIGINAL: muidaq The maiden of my Long EZ 46 (white) did not go so well. Are replacement canards available? |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
ok I got the cowl ready for you. Just give us a call and reference to the order number below and leave us your credit card. It's $20 with shipping included. I've already put a note under this order.
John Nitro Planes ORIGINAL: flhyr ORIGINAL: nitrostaff1 I got a new cowl for you. What's your order number with us? John Nitro Planes ORIGINAL: flhyr Hi John, I have this plane: Nitro Models Extra 330 90 - 63'' (black one) http://www.nitroplanes.com/ex3309063arf.html and I would very much like to purchase a new cowl but its not shown as a replacement or repair part. Do you offer this part for sale? Thanks, Pete. yhst-17210252890263-63809 Please be advised that I have moved since the time I've ordered this, and this part is not really nitroplanes responsibility to replace as there is nothing wrong with the one supplied with the kit, I just need another for engine changes I have planned. Please advise, and thanks for the response. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Sure I can help you what's your order number with us? If you don't know PM me your name and address.
John Nitro Planes ORIGINAL: Ron C. John how's it going? I have a P-40 Warhalk I bought ( among others ) from you about 6 mouth ago and I recently damaged the elivator. I need to replace it as soon as posible I've got a war bird show coming up in early OCT. I'm looking forward to hearing from you. Model is a Cmp. P-40 Warhalk 140 size 73'' Nitro/Gas Thanks Alot Ron C. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
how about this one? http://www.nitroplanes.com/such40.html
John Nitro Planes ORIGINAL: Sourkraut John... is there a replacement cowl for this plane available? or a suitable substitute? Nitro Models 53 Super Chipmunk http://www.nitroplanes.com/such5258.html Thanks Curtis |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
See my PM to you.
John Nitro Planes ORIGINAL: notruthless John, I sent you a PM yesterday re. wing hardware for an Ultimate 40. Thanks, Chris |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
sorry about that. Correct landing gear sent via USPS 420466289101805213907686886598
John Nitro Planes ORIGINAL: sgoen John, Got the parts today. Unfortenatly it was the wrong landing gear and pants. I believe what I got was for the 100 cc Suhkoi. The box was marked 50cc Sukhoi which is what I need. Let me know what you would like to do? ORIGINAL: nitrostaff1 item sent and thanks UPS 1ZX03V030398963292 John Nitro Planes ORIGINAL: sgoen yes it is ok to charge to the card on file. Not sure which one it is, but if it does not work pm me and I will give you a good card number. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hy I have talked to your suport staff and they said you had them in stock. Whitting for an E-Mail Thanks Ron C.
|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I didn't receive the manual for the EXI 450LE Heli in the box with my order.
Could you send me one please? [email protected] Frank Mattox 15842 W. Meade Lane Goodyear, AZ. 85338 |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I need a set of replacement wings with gear for my Double Trouble Two P-51 D. I have pulled the right gear and it has ruined the wood as well. I don't feel like fixing it again. Thanks.
Can you tell me what part number and how much shipped to 64804? http://www.nitroplanes.com/saofwenewdot.html |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Jun:
Hello...I need your help, You exchanged my jet..I left it alone for over a month. Last night powered it up in my living room and the fan exploded. Here's my order information. Lawrence Mitchell ZIP 21012. Can you help me? Your coworkers are hangin up on me..telling me to get lost. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
See my reply on the other thread.
You only need a new fan blade set which is easy to replace. John should be able to provide this to you. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I'm in need of a new Katana S 140vII cowl. Do you have any coming in the near future?
Thanks, Robert |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Good day John. I am looking for a replacement canopy for my Cessna Skymaster .25 337. I just completed building the kit and while testing the engines, my canopy (not screwed down) got sucked into the prop which pretty much destroyed it. I have a new plane ready to fly but it looks like crap without the canopy. Can you offer any assistance ?
Thanks, Pat Estes |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
what's your order number with us? did you place order for the parts with our support staff?
John Nitro Planes ORIGINAL: Ron C. Hy I have talked to your suport staff and they said you had them in stock. Whitting for an E-Mail Thanks Ron C. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Sorry they don't come with manual because the heli has been assembled for you already. If you need help installing servo and configurate the servo you can youtube trex 450 se v2 setup video as they use the same methods to set up. Please see here: http://www.youtube.com/blueray450
John Nitro Planes ORIGINAL: fmattox11 I didn't receive the manual for the EXI 450LE Heli in the box with my order. Could you send me one please? [email protected] Frank Mattox 15842 W. Meade Lane Goodyear, AZ. 85338 |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Sure buddy. Please PM me your order number and if you don't know your order number. Let me know your name and address so I can help you locate a pair of wings for you. Will you been needing the retract as well? or you plan to use the same retracts?
John Nitro planes ORIGINAL: jouleman I need a set of replacement wings with gear for my Double Trouble Two P-51 D. I have pulled the right gear and it has ruined the wood as well. I don't feel like fixing it again. Thanks. Can you tell me what part number and how much shipped to 64804? http://www.nitroplanes.com/saofwenewdot.html |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
No Problem and sorry about that. I'll send you a new fan blade so you can replace it. Please keep this in mind that I can not do anything anymore on this order because your F18 is a replacement and it's a new plane.
John Nitro Planes ORIGINAL: Scoobys_piece Jun: Hello...I need your help, You exchanged my jet..I left it alone for over a month. Last night powered it up in my living room and the fan exploded. Here's my order information. Lawrence Mitchell ZIP 21012. Can you help me? Your coworkers are hangin up on me..telling me to get lost. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I can check for you. What's your order number?
John Nitro Planes ORIGINAL: mustang1-RCU I'm in need of a new Katana S 140vII cowl. Do you have any coming in the near future? Thanks, Robert |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Yes I got your PM and I'll let you know once I have it.
John Nitro Planes ORIGINAL: P.Estes Good day John. I am looking for a replacement canopy for my Cessna Skymaster .25 337. I just completed building the kit and while testing the engines, my canopy (not screwed down) got sucked into the prop which pretty much destroyed it. I have a new plane ready to fly but it looks like crap without the canopy. Can you offer any assistance ? Thanks, Pat Estes |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
ORIGINAL: pilot701 Hello I need a canopy, right and left wing for the CMPro Extra 330L 50cc, i see that all of them are out of stock, can you special order some for me thanks email - [email protected] http://www.nitroplanes.com/cmpex3350rim.html http://www.nitroplanes.com/cmpex3350lem.html http://www.nitroplanes.com/cmpextra330l50cc-canopy.html thanks John Nitro Planes |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
hello John:
I was in the hospital for about a month and then this...Sheesh. Thank you. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hi John,
Help please. I just bought a NitroModel Piper J3 52 71.5" in the still sealed box from a fellow that bought it and then got out of the hobby. There is no manual. Can you help me obtain/download one in any way? Thanks in advance for your help. Pete |
| All times are GMT -8. The time now is 10:22 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.