|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hey John, I need some help...
- Always provide your order number ( usually begins with YSTxxx ). yhst-17210252890263-91341 - Provide a link to the web page showing which product you purchased. http://www.nitroplanes.com/new20sdmoco4.html - Include a description of the item you are trying to obtain. I accidently broke the red antennawire off at the base ofthe stock3 channel receiver while trying to fix the plane after a small crash (plane is fine but I can't control it).Do you stockthese receivers?If so how much do they cost? The maximum amount of distance i can get from the plane is about 3 feet before it cuts out now:( - If possible pictures help. http://site.nitroplanes.com/condor-plane-2.jpg Please help, I R sad :( Walter |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
yhst-17210252890263-76755
Ultimate BiPe 40 - 41.5 Gas_Ultimate40Purple Scale Nitro Gas Radio Remote Control Aerobatic Airplane (ARF) BiPlane Need: Top and Bottom wing set. Thanks. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Please start you own/new thread. I'm getting your emails..>Thanks
|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hi John:
can you send tracking information for replacement blade..I need all the plastics...the cone and the blade.Thank you. Lawrence MItchell 21012 |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
[quote]ORIGINAL: nitrostaff1 Sure buddy. Please PM me your order number and if you don't know your order number. Let me know your name and address so I can help you locate a pair of wings for you. Will you been needing the retract as well? or you plan to use the same retracts? John Nitro planes [quote]ORIGINAL: jouleman I need a set of replacement wings with gear for my Double Trouble Two P-51 D. I have pulled the right gear and it has ruined the wood as well. I don't feel like fixing it again. Thanks. Can you tell me what part number and how much shipped to 64804? http://www.nitroplanes.com/saofwenewdot.html I PM'd you. Just wondering if you have read it...Thanks much! |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
EVERYONE......PLEASE START A NEW THREAD. Thank you..I'm getting your emails...Thank you
|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Sorry If you get this email, but I need to get JOhns Attnetion
JOhn: This is Lawrence Mitchell ZIP 21012 exceed F-18 you were kind enough to send the fam...but I also need the plastic coen that goes on top of the blade.....Thank you Could you find it in your heart to send the cone? |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hello,
I have a 120 ultimate bi-plane arf, the pink and blue one. I am in need a the complete hardware kit for this airplane. If you could tell me how much this and if you have one i would really appreciate it I bought the plane without hardware and really wanting to build and fly this airplane. If you could help me with this i would really appreciate it. Thanks Scott |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Please help. I bought the Guanli a-10 a few weeks ago. after cycling the battery 3 times the cover started to melt,afer charging for approx 60 minuetes.I only get clicks from the motors now, they did turn on once for a few seconds with minimal power then stopped. All sevos still working though. I wonder if the speed control is wasted. can you help me?
|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I have tried for 2 WEEKS to obtain a Bobcat 50 manual, but to avail????
I have tried every forum under the sun and threads and posting and contacting, but no help yet, so I will try here. Would someone help me obtain a manual please? Thank you in advance, Lou |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Did you contact john/nitrostaff1 directly?
ORIGINAL: Fledgling I have tried for 2 WEEKS to obtain a Bobcat 50 manual, but to avail???? I have tried every forum under the sun and threads and posting and contacting, but no help yet, so I will try here. Would someone help me obtain a manual please? Thank you in advance, Lou |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Great, got it, thanks again!
|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hey John. Any chance of getting a wing for the Sukhoi 31? Yellow/Blue.
Thanks Cliff |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
hey, john. my name is rick. i'm in need of a cmp extra 300s 140 parts i need the canopy and if the abs peice that goes under it is availabe great if not the canopy is enough. please let me know and if there is a canopy from another model that would fit let me know thanx, rick [email protected]
|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
1 Attachment(s)
hey, john. my name is rick. i'm in need of cmp extra 300s 140 parts i need the canopy and if the abs peice that goes under it is availabe great if not the canopy is enough. please let me know and if there is a canopy from another model that would fit let me know thanx, rick rcrick10@yahoo.
|
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
1 Attachment(s)
I will resist the urge.....I have been having a difficult time getting a part for my NitroPlanes F-15...the Servo arm for the elevator control was not on the airplane when I received it. I have been in contact with the service department of Nitro Planes with results that have been less than satisfactory. I have sent picturesof the missing part and a complete description of that part....I have received 3 different replacement orders and they have all been incorrect. Now, after over 2 months of working to resolve this issue, still not able to fly my plane, I was told by the service department that they would not send anymore parts.....I still have not received the correct part...! As a customer, I find myself in the dissatisfied category. They will refund my money, but I have to pay shipping to return the model...it's not my fault that the product was incomplete when I received it.....I sent the required money, why did'nt I receive the complete product. I would gladly buy the part if it were carried in a hobby shop in this area. What do I do now? We're only talking about a servo arm....how difficult should this be?
Any help would be appreciated! The order #85931 |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
If you are talking about the cone that's on the top of the fan then we've shipped to you already. USPS 420210129101805213907703386414
John Nitro planes ORIGINAL: Scoobys_piece hello John: I was in the hospital for about a month and then this...Sheesh. Thank you. |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Yes I can help. Please private message (PM) your email address and I'll get you a copy.
John Nitro Planes ORIGINAL: rstpete Hi John, Help please. I just bought a NitroModel Piper J3 52 71.5'' in the still sealed box from a fellow that bought it and then got out of the hobby. There is no manual. Can you help me obtain/download one in any way? Thanks in advance for your help. Pete |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Receiver replaced on the 4th via USPS 420968219101805213907738427830
John Nitro Planes ORIGINAL: eccvets Hey John, I need some help... - Always provide your order number ( usually begins with YSTxxx ). yhst-17210252890263-91341 - Provide a link to the web page showing which product you purchased. http://www.nitroplanes.com/new20sdmoco4.html - Include a description of the item you are trying to obtain. I accidently broke the red antenna wire off at the base of the stock 3 channel receiver while trying to fix the plane after a small crash (plane is fine but I can't control it). Do you stock these receivers? If so how much do they cost? The maximum amount of distance i can get from the plane is about 3 feet before it cuts out now:( - If possible pictures help. http://site.nitroplanes.com/condor-plane-2.jpg Please help, I R sad :( Walter |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Yes PM sent. Waiting for your reply.
John Nitro Planes [quote]ORIGINAL: jouleman [quote]ORIGINAL: nitrostaff1 Sure buddy. Please PM me your order number and if you don't know your order number. Let me know your name and address so I can help you locate a pair of wings for you. Will you been needing the retract as well? or you plan to use the same retracts? John Nitro planes ORIGINAL: jouleman I need a set of replacement wings with gear for my Double Trouble Two P-51 D. I have pulled the right gear and it has ruined the wood as well. I don't feel like fixing it again. Thanks. Can you tell me what part number and how much shipped to 64804? http://www.nitroplanes.com/saofwenewdot.html I PM'd you. Just wondering if you have read it...Thanks much! |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Ok what's your order number? Also can you please send me a link of the item from my website or the product code of the product.
John Nitro Planes ORIGINAL: 4smada Hello, I have a 120 ultimate bi-plane arf, the pink and blue one. I am in need a the complete hardware kit for this airplane. If you could tell me how much this and if you have one i would really appreciate it I bought the plane without hardware and really wanting to build and fly this airplane. If you could help me with this i would really appreciate it. Thanks Scott |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Yes it's the ESC that's having a problem and I can replace it. Order number?
John Nitro Planes ORIGINAL: doorman7 Please help. I bought the Guanli a-10 a few weeks ago. after cycling the battery 3 times the cover started to melt ,afer charging for approx 60 minuetes. I only get clicks from the motors now, they did turn on once for a few seconds with minimal power then stopped. All sevos still working though. I wonder if the speed control is wasted. can you help me? |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I can look for it. Order number? can I get a link of the plane you have from my website?
John Nitro Planes ORIGINAL: STRAUBMAN Hey John. Any chance of getting a wing for the Sukhoi 31? Yellow/Blue. Thanks Cliff |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Let me look for it and I'll get back to you.
John Nitro Planes ORIGINAL: rcrick10 hey, john. my name is rick. i'm in need of a cmp extra 300s 140 parts i need the canopy and if the abs peice that goes under it is availabe great if not the canopy is enough. please let me know and if there is a canopy from another model that would fit let me know thanx, rick [email protected] |
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
ok no problem and I'm sorry about this. I'll correct this and send you the missing servo arms.
Update: I've removed 2 elevator servo arm from the F15E you have so I know I got the correct servo to you this time. John Nitro Planes ORIGINAL: Baalooo I will resist the urge.....I have been having a difficult time getting a part for my NitroPlanes F-15...the Servo arm for the elevator control was not on the airplane when I received it. I have been in contact with the service department of Nitro Planes with results that have been less than satisfactory. I have sent picturesof the missing part and a complete description of that part....I have received 3 different replacement orders and they have all been incorrect. Now, after over 2 months of working to resolve this issue, still not able to fly my plane, I was told by the service department that they would not send anymore parts.....I still have not received the correct part...! As a customer, I find myself in the dissatisfied category. They will refund my money, but I have to pay shipping to return the model...it's not my fault that the product was incomplete when I received it.....I sent the required money, why did'nt I receive the complete product. I would gladly buy the part if it were carried in a hobby shop in this area. What do I do now? We're only talking about a servo arm....how difficult should this be? Any help would be appreciated! The order #85931 |
| All times are GMT -8. The time now is 02:33 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.