RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC 1/8th Scale Buggies (https://www.rcuniverse.com/forum/rc-1-8th-scale-buggies-244/)
-   -   Which Hyper 7 (https://www.rcuniverse.com/forum/rc-1-8th-scale-buggies-244/3429313-hyper-7-a.html)

EtnieSk8r3000 10-14-2005 08:52 AM

RE: Which Hyper 7
 
Could it be the glow plug?I am using the one that came with it.It says.Glow Plug Nitro .12 or Ofna/Picco .12.At the top it says 1/10 car.But in the catalog i got it says that its a .12 or .21-.28 engine too.HOT Glow plug.Could i just take it back and exchage it for a new Buggy?

EtnieSk8r3000 10-14-2005 08:54 AM

RE: Which Hyper 7
 
How do i no ween to stop

EtnieSk8r3000 10-14-2005 08:56 AM

RE: Which Hyper 7
 
Screw it in right?

EtnieSk8r3000 10-14-2005 08:59 AM

RE: Which Hyper 7
 
do i set them back to normal needle setting that the only one they say besides break-in needle setting

rolandh21 10-14-2005 11:16 AM

RE: Which Hyper 7
 
use the idle trim on you transmitter to lower the idle. that should be the easiest way. the worst thing you can ever do is go turning screws on your engine if you don't know what you are doing.

kx250ryder 10-14-2005 01:12 PM

RE: Which Hyper 7
 


ORIGINAL: EtnieSk8r3000
Can someone tell me the right way to set the needles.And how to make it have lower idle its idling fast.
I just posted this on another forum, it will come in handy in your case too. For reference when reading the post (link at bottom):

Lean (tighten screw clockwise):
- More air
- less fuel
- hotter
- more powerful (to a point)
- shorter engine life

Richen (loosen screw counter clockwise):
- More fuel
- less air
- cooler
- less powerful (to a point)
- longer engine life

Idle:
Tighten = increase in RPM
Loosen = decrease in RPM

And to keep your engine from blowing up, get a temperature gauge until you get used to tuning by sound and smoke ($20.00 for a temp gauge is cheaper than $120 or more for an engine).

http://www.rcuniverse.com/forum/fb.asp?m=3455189

EtnieSk8r3000 10-14-2005 08:51 PM

RE: Which Hyper 7
 
anyone have any tip for me?I am going to try to get it going at my Sister's B.F. house tommorrow.

kx250ryder 10-14-2005 08:57 PM

RE: Which Hyper 7
 


ORIGINAL: EtnieSk8r3000

anyone have any tip for me?I am going to try to get it going at my Sister's B.F. house tommorrow.
The post right above yours is one I wrote to YOU. At the bottom is a link that will tell you how to tune your engine. The top portion (above the link) contains a simple glossary of terms so that you will understand what the link is talking about.

EtnieSk8r3000 10-14-2005 09:11 PM

RE: Which Hyper 7
 
Whats the ribbin thing at my buggy came with?Whats it for?

EtnieSk8r3000 10-16-2005 09:33 AM

RE: Which Hyper 7
 
Whats the ribbin thing at my buggy came with?Whats it for?Tell me plz someone

EtnieSk8r3000 10-16-2005 11:21 AM

RE: Which Hyper 7
 
Its goes on the intina.Buy y does it?

Foxy 10-17-2005 03:17 AM

RE: Which Hyper 7
 
It displays your frequency for other RC users around you, to avoid interference. Nobody uses 'em tho'...

Da Smak 10-17-2005 03:43 AM

RE: Which Hyper 7
 
Americanesse : Ribbin, Intina,

ENGLISH : Ribbon, Antenna.

Where it goes is described before. It is also to display/WARN to to ohers that you aint got a clue what your doing.
:D

Foxy 10-17-2005 03:59 AM

RE: Which Hyper 7
 
:D

xrichs 10-17-2005 04:55 AM

RE: Which Hyper 7
 
get A spektrum system


All times are GMT -8. The time now is 11:31 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.