RC Surfer
#3701
Join Date: May 2009
Location: Cape Towm, SOUTH AFRICA
Posts: 2,769
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hi Guys
I have been meaning to join this great bunch for some time now - but needed to get 'My Board build underway'
Hopefully soon - we will be posting some great RC Surfer rides from SUNNY SOUTH AFRICA !
I have a few post orders if this prototype works - we will mold the board for =reproduction if all goes as planned.
I will drop a few more pics once the hardware is fitted !
Regards
Dominic(YPC)
YouTube - formulaish
Youngz Performance Craft
[email protected]
I have been meaning to join this great bunch for some time now - but needed to get 'My Board build underway'
Hopefully soon - we will be posting some great RC Surfer rides from SUNNY SOUTH AFRICA !
I have a few post orders if this prototype works - we will mold the board for =reproduction if all goes as planned.
I will drop a few more pics once the hardware is fitted !
Regards
Dominic(YPC)
YouTube - formulaish
Youngz Performance Craft
[email protected]
#3702
Senior Member
Join Date: Sep 2011
Location: CORONACalifornia
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Very cool! Welcome aboard Domic!
Checked your tunnel boat out also, looks fast!
Wondering if you are near Voyage Yachts, a sail catamaran builder in SA, I know a few guys from there.
Looking forward to more pics and also hear how the testing goes!
Checked your tunnel boat out also, looks fast!
Wondering if you are near Voyage Yachts, a sail catamaran builder in SA, I know a few guys from there.
Looking forward to more pics and also hear how the testing goes!
#3703
Senior Member
Join Date: Dec 2006
Location: San Diego,
CA
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
YPC,
Very nice board! What are the particulars? length,width what about the surfer? have done that yet? board looks nice.
South Africa in the HOUSE !!!!
Very nice board! What are the particulars? length,width what about the surfer? have done that yet? board looks nice.
South Africa in the HOUSE !!!!
#3704
Join Date: May 2009
Location: Cape Towm, SOUTH AFRICA
Posts: 2,769
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hi
Length 600 mm (2ft) width 160 mm - very lean - The motor fits half into the lower pod to ensure a very low CG to improve righting process.
What is the size of the Kyosho rc surfer ?
I have been giving the RC Rider some serious thought. Reading through the posts it is clear that the rc rider takes a hammering from the surf. mass producing a 3D rider of foam and glass will not be cost effective and I dint believe all that strong to be light.
What I plan to do is Laser cut a silhouette of a surfer (Front/back) of 20 mm laminated neoprene. Perhaps screen print it either side.
It will work very well as part of the righting process - be more streamlined when punching through the white water - and take a serious punch.
It wont look as COOL as the Dude - however it will be functional and look the part from the beach.
Regards
Dominic(YPC)
YouTube - formulaish
Youngz Performance Craft
[email protected]
Length 600 mm (2ft) width 160 mm - very lean - The motor fits half into the lower pod to ensure a very low CG to improve righting process.
What is the size of the Kyosho rc surfer ?
I have been giving the RC Rider some serious thought. Reading through the posts it is clear that the rc rider takes a hammering from the surf. mass producing a 3D rider of foam and glass will not be cost effective and I dint believe all that strong to be light.
What I plan to do is Laser cut a silhouette of a surfer (Front/back) of 20 mm laminated neoprene. Perhaps screen print it either side.
It will work very well as part of the righting process - be more streamlined when punching through the white water - and take a serious punch.
It wont look as COOL as the Dude - however it will be functional and look the part from the beach.
Regards
Dominic(YPC)
YouTube - formulaish
Youngz Performance Craft
[email protected]
#3705
Member
Join Date: Jul 2010
Location: adelaide, AUSTRALIA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Howdy All,
Just read the last 20 pages or so, i love those custom boards!!!
Are these still available, NQD lisa etc? Have done a quick search to no avail.
Cheers Nigel
Just read the last 20 pages or so, i love those custom boards!!!
Are these still available, NQD lisa etc? Have done a quick search to no avail.
Cheers Nigel
#3706
Join Date: May 2009
Location: Cape Towm, SOUTH AFRICA
Posts: 2,769
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hi Nigel
What are you 'surfing' at the moment.
We are hoping to have our new 'rc board' available in the near future ( 3 months)
Still need to conduct riding tests and build production molds.
Our objective is to build a' rc board' that is up to withstanding the challenge of the oceans harsh conditions, as well as being able to "SHRED' like the hottest surfer. Aptly named YPC = Shredder !
having been manufacturing in the rc racing boat world for a good number of years I know what is expected of a product that needs to perform and satisfy expectations.
I have no doubt that this sport will go well in SA- we are 5 minutes from the famous Muizenberg Beach in Cape Town - where all the surfers ( young and old) cut their teeth - learning to surf.
a few outings in the midst of them all - and I have no doubt there will be a good few sold !!!!
Will keep our progress posted
Regards
Dominic(YPC)
YouTube- formulaish
Youngz Performance Craft
[email protected]
What are you 'surfing' at the moment.
We are hoping to have our new 'rc board' available in the near future ( 3 months)
Still need to conduct riding tests and build production molds.
Our objective is to build a' rc board' that is up to withstanding the challenge of the oceans harsh conditions, as well as being able to "SHRED' like the hottest surfer. Aptly named YPC = Shredder !
having been manufacturing in the rc racing boat world for a good number of years I know what is expected of a product that needs to perform and satisfy expectations.
I have no doubt that this sport will go well in SA- we are 5 minutes from the famous Muizenberg Beach in Cape Town - where all the surfers ( young and old) cut their teeth - learning to surf.
a few outings in the midst of them all - and I have no doubt there will be a good few sold !!!!
Will keep our progress posted
Regards
Dominic(YPC)
YouTube- formulaish
Youngz Performance Craft
[email protected]
#3707
Junior Member
Join Date: Dec 2005
Location: Garden Grove, CA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hey Guys
I just rediscovered my never used board shark in my garage that I bought about 3 years ago.
Is it worth it to try to modify this one?
From scanning this thread would would this be a good set up?
HobbyWing Seaking-120A Brushless ESC for Boat
HobbyWing 3660 SL 3060kv Brushless Inrunner (WaterCooled)
Running a 3 cell lipo
Thanks Guys
I just rediscovered my never used board shark in my garage that I bought about 3 years ago.
Is it worth it to try to modify this one?
From scanning this thread would would this be a good set up?
HobbyWing Seaking-120A Brushless ESC for Boat
HobbyWing 3660 SL 3060kv Brushless Inrunner (WaterCooled)
Running a 3 cell lipo
Thanks Guys
#3708
Senior Member
Join Date: Jul 2011
Location: Haiku, HI
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Note to all builders- I used some aluminum tubing instead of brass for cooling pickups, and found it to be a bad idea. Salt water eat up the aluminum in about 6 mo. to the point it leaked. I just replaced it with brass.
Aloha, Karl
Aloha, Karl
#3710
Senior Member
Join Date: Sep 2011
Location: CORONACalifornia
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Roger that, the Sea reclaims everything eventually, it is a very good idea to flush out the cooling lines after each session as well, many components in the motor and ESC cooling water contact items are also Aluminum.
I have also been pulling and re-greasing the prop shaft often, checking the seals and storing the RC Surfer so the seals cannot take a set.
I have also been pulling and re-greasing the prop shaft often, checking the seals and storing the RC Surfer so the seals cannot take a set.
#3711
Banned
Join Date: Feb 2008
Location: So, CA
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Maui John: whats your take on the best central location for the Bro Down.
I'm getting people asking for the location.
It's been a long time since I was in that area, but doesn't seem like there is
a lot of distance from T street to 204's. Thats the boundry area I have been letting people know.
BB: I contacted Ed from Rc surfrider, and he may be able to make it down as swell.
Sail Dog: Been looking into Rooms, There seems to be a lot near the pier.
Curly
I'm getting people asking for the location.
It's been a long time since I was in that area, but doesn't seem like there is
a lot of distance from T street to 204's. Thats the boundry area I have been letting people know.
BB: I contacted Ed from Rc surfrider, and he may be able to make it down as swell.
Sail Dog: Been looking into Rooms, There seems to be a lot near the pier.
Curly
#3712
Member
Join Date: Jul 2010
Location: adelaide, AUSTRALIA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Cheers Dominic, I'm currently sufring mainly the 6'6" and my mini mal, we're in the summer patterns here....haha
Not quite what you were meaning i think. I don't have an rc surfer, which is kind of funny realy as i surf and i've got just about everthing else in rc, must have missed this somehow up till now i guess?
So starting fresh, have plenty of rc stock availible, so board/deck figure etc i could get away with but would prefer something stock/complete as such that i could mod..etc.
It looks like all the mass produced versions seem to have been discontinued though, shame.
Cheers Nigel
Not quite what you were meaning i think. I don't have an rc surfer, which is kind of funny realy as i surf and i've got just about everthing else in rc, must have missed this somehow up till now i guess?
So starting fresh, have plenty of rc stock availible, so board/deck figure etc i could get away with but would prefer something stock/complete as such that i could mod..etc.
It looks like all the mass produced versions seem to have been discontinued though, shame.
Cheers Nigel
#3714
Senior Member
Join Date: Apr 2010
Location: Lahaina,
HI
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
jra111
borad sharks work great, the seal is tight , but you will have to mod it a bit, lead , so it will right its self and may be fix the guy.,,
john maui
borad sharks work great, the seal is tight , but you will have to mod it a bit, lead , so it will right its self and may be fix the guy.,,
john maui
#3715
Senior Member
Join Date: Apr 2010
Location: Lahaina,
HI
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
curly
i think 204s is good it is just north of peir i think theres a parking lot right on top , but we might have to walk a bit, i have 4 batteries so not to much to pack.
john maui
i think 204s is good it is just north of peir i think theres a parking lot right on top , but we might have to walk a bit, i have 4 batteries so not to much to pack.
john maui
#3716
Senior Member
Join Date: Sep 2011
Location: CORONACalifornia
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
ORIGINAL: kitekook
dreads
I see NQD surfer still available on ebay...just look for the posts a ways back ...dealing with making them worthy.
dreads
I see NQD surfer still available on ebay...just look for the posts a ways back ...dealing with making them worthy.
His listings are on eBay as well.
#3717
Senior Member
Join Date: Mar 2005
Location: shellharbour, AUSTRALIA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
dreads maybe try calling Vaggs hobbies in miranda sydney last time i was there a month or 2 ago i think i saw a NQD hidden up high on a shelf.
#3718
Senior Member
Join Date: Sep 2011
Location: CORONACalifornia
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
ORIGINAL: RC HAWAIIAN STYLE
curly
i think 204s is good it is just north of peir i think theres a parking lot right on top , but we might have to walk a bit, i have 4 batteries so not to much to pack.
john maui
curly
i think 204s is good it is just north of peir i think theres a parking lot right on top , but we might have to walk a bit, i have 4 batteries so not to much to pack.
john maui
Have you scoped out a place to maybe have a few cold ones and some dinner for those that are staying the night?
I have to surf early on Sat then bail to crew on a yacht race, returning late afternoon....wanna get another session in Sunday morning if possible....
Where's Curly? Gotta get some plans in place!!!
#3719
Banned
Join Date: Feb 2008
Location: So, CA
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Cool Maui John,
Lets go for that. The pier has some good motel spots
and is a central location. I'm Sure I can hike to 204's from the pier
or drive if needed.
JRA: I did a mod for a shark a bit ago
here is some pics to sea.
Lets go for that. The pier has some good motel spots
and is a central location. I'm Sure I can hike to 204's from the pier
or drive if needed.
JRA: I did a mod for a shark a bit ago
here is some pics to sea.
#3720
Senior Member
Join Date: Mar 2006
Location: Torrance,
CA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
204 is just south of North Beach. If that makes sence. North beach is where PCH leaves the beach and you start to get into San Clemente proper or town. There is a train station (not the one next to the pier).
Located along Buena Vista and Avenida Aragon. From the 5 exit Pico West. Turn left onto El Camino Real (PCH) go 1 and 1/4 miles and turn right onto Avenida Aragon. Park in is free on the residential streets. Take the stairs down to the beach.
Located along Buena Vista and Avenida Aragon. From the 5 exit Pico West. Turn left onto El Camino Real (PCH) go 1 and 1/4 miles and turn right onto Avenida Aragon. Park in is free on the residential streets. Take the stairs down to the beach.
#3721
Banned
Join Date: Feb 2008
Location: So, CA
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Jan 28, 2012 So Cal Event #1 Update:
Just A Thought on the itinerary.
How About:
Sat Jan 28th:
RC Surf Expression Sessions
Time: From Dawn - ???
Location: 204's or ?
Sat Jan 28th:
Rc Surfer Board Meeting
Drinks, Dinner & Discussions
Tme: 6 Pm - ???
Location: Walking Distance to A Restauarant From The Pier (The Central Focal Point) ?
Sail Dog Suggested Mex Food And Salty Rimmed Margs.
Sun Jan 29th:
RC Surf Expression Sessions
Time: Any
All Are Welcome To Enjoy, All Are Welcome To Suggest Ideas.
This Event Is The First Of It's Kind in a while...
Curly
Just A Thought on the itinerary.
How About:
Sat Jan 28th:
RC Surf Expression Sessions
Time: From Dawn - ???
Location: 204's or ?
Sat Jan 28th:
Rc Surfer Board Meeting
Drinks, Dinner & Discussions
Tme: 6 Pm - ???
Location: Walking Distance to A Restauarant From The Pier (The Central Focal Point) ?
Sail Dog Suggested Mex Food And Salty Rimmed Margs.
Sun Jan 29th:
RC Surf Expression Sessions
Time: Any
All Are Welcome To Enjoy, All Are Welcome To Suggest Ideas.
This Event Is The First Of It's Kind in a while...
Curly
#3722
Junior Member
Join Date: Dec 2005
Location: Garden Grove, CA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Thanks John Maui and surfcurls
My parts come today ,Motor,ESC,Battery.
SurfCurls ,can point me in the right direction for a replacement prop shaft? I have read that is a must do?
I will post some pic's soon.
My parts come today ,Motor,ESC,Battery.
SurfCurls ,can point me in the right direction for a replacement prop shaft? I have read that is a must do?
I will post some pic's soon.
#3725
Senior Member
Join Date: Sep 2005
Location: Haiku,
HI
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Looking forward to seeing and hearing all about the 1st RC BroDown in southern CA tomorrow.
Kinda wish I could be there to help ripping up the 5ft-8ft perfect waves you guys will have.
Maui is FLAT for the next 3 or 4 days
Await your news & videos John
Kinda wish I could be there to help ripping up the 5ft-8ft perfect waves you guys will have.
Maui is FLAT for the next 3 or 4 days
Await your news & videos John