**Official** RXT-1 Truggy thread
#176
Senior Member
RE: **Official** RXT-1 Truggy thread
ok I been looking at the upgrade parts for the rxt-1....got a question for Eddie and decided to post it here instead of emailing him..maybe he will only have to answer it once..
here it is...part # rxb-011 is an ackerman plate...looks to be billet aluim...am I correct?..I do know its a rxb-1 part # but am sure they use the same part..lol
I think this would be a welcome addition to both my rxt and rxb....I'm kicking the idea of doing the same thing that I did to the rxb and that is go for billet towers and trading the center and rear dogbones in favor of the cv shafts....
here it is...part # rxb-011 is an ackerman plate...looks to be billet aluim...am I correct?..I do know its a rxb-1 part # but am sure they use the same part..lol
I think this would be a welcome addition to both my rxt and rxb....I'm kicking the idea of doing the same thing that I did to the rxb and that is go for billet towers and trading the center and rear dogbones in favor of the cv shafts....
#180
Senior Member
Join Date: Jan 2008
Location: Edmonton,
AB, CANADA
Posts: 1,403
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Got my rxt-1 today ...not impressed it isn't rtr, there was no fuel or batteries in it and the wheels were off lmao...... Thank you so much Eddie for the super fast shipping this thing is beautiful.
#182
RE: **Official** RXT-1 Truggy thread
ORIGINAL: Swamp3r
Got my rxt-1 today ...not impressed it isn't rtr, there was no fuel or batteries in it and the wheels were off lmao......
Got my rxt-1 today ...not impressed it isn't rtr, there was no fuel or batteries in it and the wheels were off lmao......
Lol....Don't Worry Rod......
Me and Kuppler will make a Video,,,,Showing you how to Install those Wheels....
#183
Senior Member
RE: **Official** RXT-1 Truggy thread
lmao
I'm still waiting on the video on how to put fuel in mine.....I knew I should have bought an electric....but I wouldnt know how to plug it in to charge though...lol
I'm still waiting on the video on how to put fuel in mine.....I knew I should have bought an electric....but I wouldnt know how to plug it in to charge though...lol
#185
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
A couple questions...
On the radio with EPA, what is ST.D/R? Is it a rate adjustment to limit how quickly the servo will move regardless of sudden control moves?
I installed an failsafe. Does it have to be reset each time the electronics are turned off and on?
Do the upgraded brakes mpo-08 and 09 work with the RXT? I may try the double disk setup that one of you (Adam? Rich?) did, but I like the upgrade that I put on the MXB also.
Should the built in fuel filter (the one in the tank, not the one in the fuel line) be pretty hard to blow through? I guess I expected it to be pretty "open," but a good bit of resistance may be normal.
I took it all the way to the chassis and put it all back together loctite-ing, adjusting and checking as I went. Yesterday it was sunny all day, and again this morning. Now I am ready and... IT'S RAINING!!![:@] Oh well. There's always tomorrow. Oh wait, IT'S MONDAY!!![:@][:@][:@][:@] I may have to skip work!
I have to say I really like the way this truggy is put together. Can't wait to get it on the road.
On the radio with EPA, what is ST.D/R? Is it a rate adjustment to limit how quickly the servo will move regardless of sudden control moves?
I installed an failsafe. Does it have to be reset each time the electronics are turned off and on?
Do the upgraded brakes mpo-08 and 09 work with the RXT? I may try the double disk setup that one of you (Adam? Rich?) did, but I like the upgrade that I put on the MXB also.
Should the built in fuel filter (the one in the tank, not the one in the fuel line) be pretty hard to blow through? I guess I expected it to be pretty "open," but a good bit of resistance may be normal.
I took it all the way to the chassis and put it all back together loctite-ing, adjusting and checking as I went. Yesterday it was sunny all day, and again this morning. Now I am ready and... IT'S RAINING!!![:@] Oh well. There's always tomorrow. Oh wait, IT'S MONDAY!!![:@][:@][:@][:@] I may have to skip work!
I have to say I really like the way this truggy is put together. Can't wait to get it on the road.
#186
RE: **Official** RXT-1 Truggy thread
EPA controls how much to the left and right the wheels move not how fast
Once you set the failsafe up, it should keep the memory but always check to be sure, just put the car on with out the transmitter and see if the brakes get applied.
I dont think the upgrade brakes for the megap's will work but the dual disc setup adam did would work great and be cheaper.
There will be some resistance, double check the inline filter, cant hurt to see if something is cloggint it, you never know.
TAKE OFF AND PLAY BRO!!!!!!!!!!!!
Once you set the failsafe up, it should keep the memory but always check to be sure, just put the car on with out the transmitter and see if the brakes get applied.
I dont think the upgrade brakes for the megap's will work but the dual disc setup adam did would work great and be cheaper.
There will be some resistance, double check the inline filter, cant hurt to see if something is cloggint it, you never know.
TAKE OFF AND PLAY BRO!!!!!!!!!!!!
#187
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Eddie,
The radio has a left and right EPA for steering, a high and low EPA for throttle and another labeled "ST.D/R". What is that one?
Thanks,
BK
The radio has a left and right EPA for steering, a high and low EPA for throttle and another labeled "ST.D/R". What is that one?
Thanks,
BK
#188
RE: **Official** RXT-1 Truggy thread
Hmmmmm, I have mine on spektrum so I dont have the stock anymore but as far as i know, all my radio's with that DR is for how much throw the servo gives, epa is the end point adjustments, how far the servo will go in each direction.
#189
Senior Member
RE: **Official** RXT-1 Truggy thread
I'm thinking that adjustment will throw ur throttle all the way open with just barely touching the trigger if its turned to the max...I have my rxt-1 on a jr xs3 and currently not using the stock..I will mess with it and let ya know though
#190
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Who knows if these guys are right, but they saying the Steering D/R is essentially an EPA that adjusts both ends at once. Makes sense.
[link=http://forums.radiocontrolzone.com/showthread.php?t=84277]http://forums.radiocontrolzone.com/showthread.php?t=84277[/link]
I'm still searching to find more info. My wife says I am obsessive. [:'(] I say I just like to know stuff. [sm=thumbs_up.gif]
[link=http://forums.radiocontrolzone.com/showthread.php?t=84277]http://forums.radiocontrolzone.com/showthread.php?t=84277[/link]
I'm still searching to find more info. My wife says I am obsessive. [:'(] I say I just like to know stuff. [sm=thumbs_up.gif]
#192
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Me too. If you set the EPAs to get the right amount of max steering (without any binding or anything) and equal in both directions, then having an adjustment that allows you to quickly "scale" your max steering on both sides evenly, that would make sense.
#193
Senior Member
Join Date: Jan 2008
Location: Edmonton,
AB, CANADA
Posts: 1,403
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Just broke in my rxt it's insane, for sure not putting the xtm mod in it now, just stock it's a blast. No vid srry.
#195
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Do you loctite the big nuts that hold on the wheels?
Oh, and it is worth mentioning that the wheels and tires come unvented. I vented the wheels on mine. *edit - I was wrong - I had not noticed it, but the wheels did come vented*
Oh, and it is worth mentioning that the wheels and tires come unvented. I vented the wheels on mine. *edit - I was wrong - I had not noticed it, but the wheels did come vented*
#197
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
That's funny. I guess you have fast wheels!
FYI - anyone that has the SH28 "M28-P3" here is a link to the SH web site with exploded views and such
[link=http://www.shengines.com/TECHDATA_PT2802B-P3.htm]http://www.shengines.com/TECHDATA_PT2802B-P3.htm[/link]
FYI - anyone that has the SH28 "M28-P3" here is a link to the SH web site with exploded views and such
[link=http://www.shengines.com/TECHDATA_PT2802B-P3.htm]http://www.shengines.com/TECHDATA_PT2802B-P3.htm[/link]
#198
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Don't ask why I cared whether or not this was true, but the HSN is the same on the SH18 with the rotary carb and the SH28 with the slide carb. So should you need one for your RXT for some reason, and happen to have say an old Volcano/Viper sitting around, you can swipe it for the RXT.
Links to exploded views
[link=http://www.shengines.com/PTF/PT18S01A.pdf]http://www.shengines.com/PTF/PT18S01A.pdf[/link]
[link=http://www.shengines.com/PTF/PT2802B-P3.pdf]http://www.shengines.com/PTF/PT2802B-P3.pdf[/link]
Links to exploded views
[link=http://www.shengines.com/PTF/PT18S01A.pdf]http://www.shengines.com/PTF/PT18S01A.pdf[/link]
[link=http://www.shengines.com/PTF/PT2802B-P3.pdf]http://www.shengines.com/PTF/PT2802B-P3.pdf[/link]
#199
Senior Member
Join Date: Oct 2007
Location: Simi Valley,
CA
Posts: 2,909
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
ORIGINAL: bkfamily1
Do you loctite the big nuts that hold on the wheels?
Do you loctite the big nuts that hold on the wheels?
http://www.rcuniverse.com/forum/m_8665884/tm.htm
#200
Senior Member
My Feedback: (1)
Join Date: Mar 2008
Location: North Canton,
OH
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: **Official** RXT-1 Truggy thread
Picked up a Futaba 3PM 2.4GHz radio for the RXT today! Guy was selling it new in the box for $120. Said he bought it, saw something he liked better at another LHS, then could not return it since it was electronics. Seems like an unlikely story, but he had the recipt, so it seems legit, and it works perfectly.