Someone please have a problem or something!!!!
12-10-2009 | 06:39 AM
#26
Senior Member
Joined: Nov 2007
Posts: 3,961
Likes: 0
Received 0 Likes
on
0 Posts
From: Bridgewater,
NJ
RE: Someone please have a problem or something!!!!
Yes, I would like it if you could convince my History teacher that he's a bit on the odd side (even though he knows it). He has a strange way of leaving the windows open and turning on the AC because he thinks a 60 degree room is too hot and he starts sweating if it's over like 55 lol. Supposed to be 18F tonigt and I'd rather not walk in there and freeze to death if you know what I mean. Any suggestions? (I was thinking the rule should be if theres snow on the ground the windows should be closed lol)
12-10-2009 | 07:33 AM
#27
Thread Starter
RE: Someone please have a problem or something!!!!
Tell him to go on a diet, only a very overweight person would start to sweat without manual labor at 60 degrees.
12-10-2009 | 08:59 AM
#28
Junior Member
Joined: Jul 2009
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
From: licolnN/A, UNITED KINGDOM
RE: Someone please have a problem or something!!!!
Ihave a problem ,I hav'nt been flying for 3 weeks due to bad weather ,our flying field is not to bad cnsidering the amount of rain we had ,you just need a swomp buggie to get to it (c an't move to florida although i would like to i live in sunny england, regards" TAILDRAGER"
12-10-2009 | 10:16 AM
#29
Thread Starter
RE: Someone please have a problem or something!!!!
Everyone has been getting affected by the weather but you could move to Flordia, would just be a long move, lol, maybe arizona would be better with the dry climate.
12-10-2009 | 01:40 PM
#30
RCU Forum Manager/Admin
My Feedback: (9)
RE: Someone please have a problem or something!!!!
ORIGINAL: HimotoRacingUSA
Tell him to go on a diet, only a very overweight person would start to sweat without manual labor at 60 degrees.
Tell him to go on a diet, only a very overweight person would start to sweat without manual labor at 60 degrees.
Tell him to go on a diet, and buy a Himoto Truck for relaxation. Then he wouldn't be so tense!!!
Ken
12-10-2009 | 01:42 PM
#31
RCU Forum Manager/Admin
My Feedback: (9)
RE: Someone please have a problem or something!!!!
ORIGINAL: HimotoRacingUSA
Everyone has been getting affected by the weather but you could move to Flordia, would just be a long move, lol, maybe arizona would be better with the dry climate.
Everyone has been getting affected by the weather but you could move to Flordia, would just be a long move, lol, maybe arizona would be better with the dry climate.
Ok, yes everybody has been affected by the weather.But if you bought another Himoto Truck you wouldn't have to worry about the weather, you could just run in the snow!!!!
Ok Eddie, you get the idea now right!!!!
Ken
12-10-2009 | 02:32 PM
#32
Thread Starter
RE: Someone please have a problem or something!!!!
actually the himoto heli would be the way to go in the winter and rainy season, you can fly it anywhere and its a blast!!!!
Thanks Ken
Thanks Ken
12-10-2009 | 03:24 PM
#33
Senior Member
Joined: Aug 2008
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
From: Athabasca,
AB, CANADA
RE: Someone please have a problem or something!!!!
tee hee hee 30 F hahahahaaaa
been the coldest December around here in awhile, we even have snow on the ground, enough for sledding!!
-25- -23 c over the last week, still going to stay round that for the next week.
(-13 -31 F American terminology)
Just buggn ya'all
been the coldest December around here in awhile, we even have snow on the ground, enough for sledding!!
-25- -23 c over the last week, still going to stay round that for the next week.
(-13 -31 F American terminology)
Just buggn ya'all
12-10-2009 | 03:26 PM
#34
RCU Forum Manager/Admin
My Feedback: (9)
RE: Someone please have a problem or something!!!!
ORIGINAL: HimotoRacingUSA
actually the himoto heli would be the way to go in the winter and rainy season, you can fly it anywhere and its a blast!!!!
Thanks Ken
actually the himoto heli would be the way to go in the winter and rainy season, you can fly it anywhere and its a blast!!!!
Thanks Ken
Ken
12-10-2009 | 11:39 PM
#35
Senior Member
RE: Someone please have a problem or something!!!!
ok Eddie....
my steelers have lost 5 games in a row now [sm=drowning.gif]....I'm bout ready to go freakin postal...PLEASE give the team and the coaches what they need to know to win ( although it really doesnt matter at all after tonight, would take an act of god to make the playoffs, AINT GONNA HAPPEN!!!).....
my steelers have lost 5 games in a row now [sm=drowning.gif]....I'm bout ready to go freakin postal...PLEASE give the team and the coaches what they need to know to win ( although it really doesnt matter at all after tonight, would take an act of god to make the playoffs, AINT GONNA HAPPEN!!!).....
12-11-2009 | 12:56 AM
#36
Member
Joined: May 2006
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
From: saint peterburg, FL
RE: Someone please have a problem or something!!!!
well the weather is not the best here in florida eather right now... been raining for the last few days.. but its goin to be in the 80s this weekend... so everone should come down and camp out in my back yard then we could really make a himoto video...
12-11-2009 | 11:49 AM
#37
Senior Member
Joined: Nov 2007
Posts: 3,961
Likes: 0
Received 0 Likes
on
0 Posts
From: Bridgewater,
NJ
RE: Someone please have a problem or something!!!!
ORIGINAL: pede_187
Yes, I would like it if you could convince my History teacher that he's a bit on the odd side (even though he knows it). He has a strange way of leaving the windows open and turning on the AC because he thinks a 60 degree room is too hot and he starts sweating if it's over like 55 lol. Supposed to be 18F tonigt and I'd rather not walk in there and freeze to death if you know what I mean. Any suggestions? (I was thinking the rule should be if theres snow on the ground the windows should be closed lol)
Yes, I would like it if you could convince my History teacher that he's a bit on the odd side (even though he knows it). He has a strange way of leaving the windows open and turning on the AC because he thinks a 60 degree room is too hot and he starts sweating if it's over like 55 lol. Supposed to be 18F tonigt and I'd rather not walk in there and freeze to death if you know what I mean. Any suggestions? (I was thinking the rule should be if theres snow on the ground the windows should be closed lol)
ORIGINAL: HimotoRacingUSA
Tell him to go on a diet, only a very overweight person would start to sweat without manual labor at 60 degrees.
Tell him to go on a diet, only a very overweight person would start to sweat without manual labor at 60 degrees.
12-11-2009 | 03:53 PM
#39
Senior Member
Joined: Nov 2007
Posts: 3,961
Likes: 0
Received 0 Likes
on
0 Posts
From: Bridgewater,
NJ
RE: Someone please have a problem or something!!!!
I've got something I"m wondering about. If I have a sensorless esc, could I run a sensored motor without the sensor cable (would this run like a sensorless motor?), and would it run decently, if at all?
12-11-2009 | 06:24 PM
#41
Senior Member
Joined: Nov 2007
Posts: 3,961
Likes: 0
Received 0 Likes
on
0 Posts
From: Bridgewater,
NJ
RE: Someone please have a problem or something!!!!
I also have another question I am wondering about. On the MXT-2s that I converted to electric. There are no brakes and for that matter, no reverse. Couldn't hurt to have the brakes, lol. So, the reason for this is because it has the one way bearings. Now, how would I give it reverse? Would I get a regular bearing, or is that going to make it stand still in foward AND reverse?
12-11-2009 | 06:31 PM
#42
Thread Starter
RE: Someone please have a problem or something!!!!
you need to lock the one way so its "no way". A regular bearing would just slip forward and reverse. You could lock that bearing with some ca glue or jb weld it.
12-11-2009 | 06:53 PM
#43
Senior Member
Joined: Nov 2007
Posts: 3,961
Likes: 0
Received 0 Likes
on
0 Posts
From: Bridgewater,
NJ
RE: Someone please have a problem or something!!!!
ORIGINAL: HimotoRacingUSA
you need to lock the one way so its ''no way''. A regular bearing would just slip forward and reverse. You could lock that bearing with some ca glue or jb weld it.
you need to lock the one way so its ''no way''. A regular bearing would just slip forward and reverse. You could lock that bearing with some ca glue or jb weld it.
12-19-2009 | 09:57 AM
#44
Junior Member
Joined: Dec 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
From: Maryville, TN
RE: Someone please have a problem or something!!!!
yo i got a python and the 1 way seems to be having problems busting and cant get it fixed let me know what u guys suggest any 1 have any extra 1 thanks again </p>
12-19-2009 | 10:12 AM
#45
Thread Starter
RE: Someone please have a problem or something!!!!
you can replace the one way, part 06267 (for the 2 speed trans) or you can take it out and try cleaning it out and put it back and see if it grabs.
12-20-2009 | 05:17 PM
#46
Joined: Dec 2007
Posts: 2,137
Likes: 0
Received 0 Likes
on
0 Posts
From: Panorama,
CA
RE: Someone please have a problem or something!!!!
O.K.......
I FINALLY got around to solving a Problem thats been Nagging at me (and my RXB-1 ) for a while now.
You all were probably wondering why I never finished the RXB Break In Video?...Or mebbe Not?
Well I couldnt get the engine to Prime.....
Long Story Short,,,,,it turned out to be a bad GasTank.
You can blow air into the tank, and air (or fuel) will come out the other end. Which is what you would Expect from a good tank,,,,right?
But if you connect it to the engine and try to Prime it,,,,,,No Go! Wont work[:@]
Weirdest thing I've ever seen on a Nitro. The tank must be Partially clogged or something......
I finally swapped out a different tank and the system Primes up perfectly.....
Guess I will be buying a new Tank from HimotoRacingUsa......Glad the Problem is Solved, cuz that RXB needs to hit the TRACK!
I FINALLY got around to solving a Problem thats been Nagging at me (and my RXB-1 ) for a while now.
You all were probably wondering why I never finished the RXB Break In Video?...Or mebbe Not?
Well I couldnt get the engine to Prime.....
Long Story Short,,,,,it turned out to be a bad GasTank.
You can blow air into the tank, and air (or fuel) will come out the other end. Which is what you would Expect from a good tank,,,,right?
But if you connect it to the engine and try to Prime it,,,,,,No Go! Wont work[:@]
Weirdest thing I've ever seen on a Nitro. The tank must be Partially clogged or something......
I finally swapped out a different tank and the system Primes up perfectly.....
Guess I will be buying a new Tank from HimotoRacingUsa......Glad the Problem is Solved, cuz that RXB needs to hit the TRACK!
12-20-2009 | 06:02 PM
#48
Thread Starter
RE: Someone please have a problem or something!!!!
ORIGINAL: Redharris
O.K.......
I FINALLY got around to solving a Problem thats been Nagging at me (and my RXB-1 ) for a while now.
You all were probably wondering why I never finished the RXB Break In Video?...Or mebbe Not?
Well I couldnt get the engine to Prime.....
Long Story Short,,,,,it turned out to be a bad GasTank.
You can blow air into the tank, and air (or fuel) will come out the other end. Which is what you would Expect from a good tank,,,,right?
But if you connect it to the engine and try to Prime it,,,,,,No Go! Wont work[:@]
Weirdest thing I've ever seen on a Nitro. The tank must be Partially clogged or something......
I finally swapped out a different tank and the system Primes up perfectly.....
Guess I will be buying a new Tank from HimotoRacingUsa......Glad the Problem is Solved, cuz that RXB needs to hit the TRACK!
O.K.......
I FINALLY got around to solving a Problem thats been Nagging at me (and my RXB-1 ) for a while now.
You all were probably wondering why I never finished the RXB Break In Video?...Or mebbe Not?
Well I couldnt get the engine to Prime.....
Long Story Short,,,,,it turned out to be a bad GasTank.
You can blow air into the tank, and air (or fuel) will come out the other end. Which is what you would Expect from a good tank,,,,right?
But if you connect it to the engine and try to Prime it,,,,,,No Go! Wont work[:@]
Weirdest thing I've ever seen on a Nitro. The tank must be Partially clogged or something......
I finally swapped out a different tank and the system Primes up perfectly.....
Guess I will be buying a new Tank from HimotoRacingUsa......Glad the Problem is Solved, cuz that RXB needs to hit the TRACK!
12-20-2009 | 06:39 PM
#49
Joined: Dec 2007
Posts: 2,137
Likes: 0
Received 0 Likes
on
0 Posts
From: Panorama,
CA
RE: Someone please have a problem or something!!!!
Thanks Eddie.....Yeah, I found that too.
I removed the Filter when I was Trouble Shooting the Problem,,,,so its not an issue for now.
I removed the Filter when I was Trouble Shooting the Problem,,,,so its not an issue for now.
12-20-2009 | 07:57 PM
#50
Senior Member
My Feedback: (1)
Joined: Mar 2008
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
From: North Canton,
OH
RE: Someone please have a problem or something!!!!
Remove the little hose barb that screws into the tank for the fuel pickup and check the hole in the tank that it threads into. I had an issue with the RXT wanting to run lean and inconsistently. I finally found that the hole in the fuel tank was not all the way through restricting the fuel flow. It seems unlikely, but it could be the same issue you are having.
BK
BK
