Ian78

Will try and experiment with a 15t motor maybe and fit heatsinks again but so heatsink is in one piece.

Ian78

I know you are thinking about the 6x4 idea, haven't forgotten.

dust75

hi ian
is that the 3rd bycmo your building?
if so if you keep the old msc the 15t motor
will be fine if you cut vent holes / windows out
that should help keep the heat down
having said that if you get a heat sink it wont do any harm

dust75

hi ian
i thought you were going to use that chassis for the 6x4 ?
it will be unique i dont think anyone has done a 6x4

dust75

hi ian
i hope deagostini redo the bycmo car one day and the kyosho nitro racer
and hatchette do the bmw m3 gtr and the nitro monster truck
im look at the aston martin 1/8th scale and maybe convert it to rc

Ian78

I have been a bit shrewd with them mate, I still got a lot of spare parts and 2 aluminium chassis here.
Have got 4 msc's too and 3 recievers. Also got about 5 standard motors .
Might sit down and actually make measurements and think hard about the 6x4, or you could beat me to it
Not 100% sure if would do the magazine thing again, maybe.

dust75

ihi ian
i think i will get my bycmo down
the next time im in the loft
i have a second chassis somewhere
i just dont have the rear end and gearbox
but i could always put the chassis and a set of wheels in place
just to see what it looks like

Ian78

That's the most people I've ever seen viewing this thread.

I will do a mock up too, at the weekend then we can maybe exchange ideas.

Ian78

Well, he wants to do the whole drift car thing, so he's going to need a 4x4.
Positive side to this is now I have the extraparts to sit down and look into the 6x4.

dust75

you do the mock up and ask me the questions
and i will pretend i know the answers and make it up as i go along lol

dust75

hi ian
couldnt you use very grippy tires
for the front and drift tires on the back or
you could always use the coloured tires
that smoke the colour of the tires

Ian78

Probably wont be until next weekend now to mess about with the mock up.

We have both decided to go 4x4 drift car those specialtyres you mention are cool, have seen them.
Have tried grippy on front and drift on the rear of the bycmo but it doesn't work well.

Will keep you informed dus, not sure what to go for yet but going to shop tomorrow just to have a good look at some.

Will still keep the bycmos.

Ian78

Check out all of these dus:

http://shop.ebay.co.uk/i.html?_nkw=b....c0.m270.l1313

dust75

hi ian
good luck with that hope you have better will power than me lol

Ian78

That was funny, was just thinking about the site and came on. Did you look at the ebay link?

dust75

hi ian
i have seen these on the bay before
and they didnt go
i think the price is to high for what they are

Ian78

I agree but if they were worth that I'd get very good money for our 2 now.

dust75

hi ian
well you could always give them a try
put a reserve on them

dust75

hi ian
along time ago any bycmo that had a 12mm hax hub conversion
went for a lot of money they are old cars now
i dont think theres a lot of intrest in them anymore

Ian78

We have got the uprated motors and the speed controllers, like yours we have ball bearings throughout and those white uprated faster cogs.
Don't forget the uprated driveshafts and locked rear diff.
The proper hydraulic shocks and 4600mah batteries.
I don't think I'd sell them anyway dus.

Ian78

Yo dus, got the cars

Not tested yet mate due to weather.

Have kept drift tyres on one and put the rally blocks on the other car, so we can test them as a drift car and also as a touring car.

dust75

hi ian
what cars did you get ?
i will look forward to video's

Ian78

dus man,

Ian78

..........

dust75

hi ian
they look very nice
what make are they