FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
06-07-2005, 07:38 AM
#102
Senior Member
Thread Starter
My Feedback: (14)
Join Date: Nov 2004
Location: melbourne beach,
FL
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Aad thank you i love my new plane..........it is really greattttttttttttttttttttttttttttttt..........max[8D]
06-15-2005, 09:00 AM
#103
Senior Member
Join Date: Mar 2005
Location: Delft, NETHERLANDS
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
http://www.rc-sim.de/index_dl.htm
If you like, you can have the Max funtana all now
Greets Aad
Enjoy with it
If you like, you can have the Max funtana all now
Greets Aad
Enjoy with it
06-17-2005, 05:13 AM
#105
Senior Member
Join Date: Mar 2005
Location: Delft, NETHERLANDS
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Hi Max,
It's good to see that so many people will have them, i hope that it make you proud
Greets Aad[8D]
It's good to see that so many people will have them, i hope that it make you proud
Greets Aad[8D]
06-17-2005, 06:03 AM
#106
Senior Member
Thread Starter
My Feedback: (14)
Join Date: Nov 2004
Location: melbourne beach,
FL
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Aad my Friend it makes me very Proud. I thank you so much.....it is a great air plane...Max[8D]
06-22-2005, 12:37 PM
#108
Senior Member
Join Date: Jun 2004
Location: TorreviejaAlicante, SPAIN
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
any chance of the harrier, cos the f 90 is great, is there any chance you can make it bigger or smaller or would that mean starting from scratch, it would be so cool to have the fleet, 40, 90, 1.40, and 80cc
06-30-2005, 07:07 AM
#110
Senior Member
Thread Starter
My Feedback: (14)
Join Date: Nov 2004
Location: melbourne beach,
FL
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Hi Yogi149.....hope everything is going great for you....on the Seagull HARRIER 3D .90 do you need any more pictures? or is there anything we can do to help you on the Seagull HARRIER 3D .90? thanks. take care Max1[8D]
07-01-2005, 09:25 AM
#113
Senior Member
Thread Starter
My Feedback: (14)
Join Date: Nov 2004
Location: melbourne beach,
FL
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Hi Yogi149 That's not a problem my Friend. We all understand that you are very busy doing the very best you can on all your projects and we Thank You so much for building the Funtana 90 for us and for making time to build the Harrier 90 for all of us to enjoy. Yogi149 you have a very nice weekend and thank you for everything. Max1
07-07-2005, 02:48 PM
#114
Senior Member
Join Date: Mar 2005
Location: Delft, NETHERLANDS
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
In the mean time an Oldtimer for realy 3D fun???
Find it by www.rc-sim.de look for the Fokker EIII 3D!!
Have fun!!
Greets Aad
07-09-2005, 05:04 PM
#117
Senior Member
Join Date: Apr 2005
Location: Huntingdon, UNITED KINGDOM
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Hi Aad!
I have a video for you! Click here!: [link=http://www.streamload.com/Deliver/Deliver.asp?cxInstID=15770324&nodeID=1769496073&returnPage=http%3A%2F%2Fwww%2Estreamload%2Ecom%2FN odes%2FNode%2Easp%3FcxInstID%3D15770324%26nodeID%3 D1139463089]VIDEO!!!!!!!!!!![/link]
I may do a better one tomorow!
Greg.
I have a video for you! Click here!: [link=http://www.streamload.com/Deliver/Deliver.asp?cxInstID=15770324&nodeID=1769496073&returnPage=http%3A%2F%2Fwww%2Estreamload%2Ecom%2FN odes%2FNode%2Easp%3FcxInstID%3D15770324%26nodeID%3 D1139463089]VIDEO!!!!!!!!!!![/link]
I may do a better one tomorow
!Greg.
07-10-2005, 10:31 AM
#119
Senior Member
Join Date: Mar 2005
Location: Delft, NETHERLANDS
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Hi Greg and Max,
I could only fly so, after 10 whisky's
[:'(]
Greets Aad, and have a nice weekend and coming week too!!!!!!
I could only fly so, after 10 whisky's
[:'(]Greets Aad, and have a nice weekend and coming week too!!!!!!
07-14-2005, 11:08 PM
#120
Senior Member
Join Date: Sep 2004
Location: Cedar Park,
TX
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Thanks for the FuntanaS 90 model!
I own a real one with a Saito 100 on board. Here's my setup that makes the sim behave like the my real plane:
Engine: weight 1.7lb (yes the 100 is that light!), HP 1.7lb, min rpm 1900, max rpm 9700 (w/ 16x4 prop)
Prop: 16"x4"
Fuse: weight 3.2 lb (AUW target is 8.5lb. I took all of the extra weight out of the fuse to reach this in the sim)
Wings: semi-span 34", aileron deflection 30 deg (real life is near 45 deg but the sim roll rate is too high at that number)
This produces a wing area of 1110 sq in just like the real thing. You get an incredibly low ~17 oz/sqft wingloading just like mine!
Run the sim at 100% speed for good realism.
Tip: to harrier this plane, use a 100% elevator->spoileron mix. I just tried this tonight and it was the first time I was able to harrier the plane (caveat: I'm a novice 3d pilot). I think the mix is needed because it is otherwise nearly impossible to cleanly stall out a wing that is this lightly loaded; you'll get severe wing rocking. I'm going to try this on my real one this weekend.
Happy Flying!
Clark
Corrections: upon further inspection I see that the ailerons on my real F90 do indeed max at 30 degrees, so the sim is actually very accurate re: roll rate. Also I was able to easily harrier my real F90 this evening using a 50% elevator -> spoileron mix so I think the sim mix can be set lower as well...
Another correction: the sim plane doesn't have as much KE coupling as the real thing. But I mix out the coupling on the real thing anyway. (That's why I didn't notice it at first.)
I own a real one with a Saito 100 on board. Here's my setup that makes the sim behave like the my real plane:
Engine: weight 1.7lb (yes the 100 is that light!), HP 1.7lb, min rpm 1900, max rpm 9700 (w/ 16x4 prop)
Prop: 16"x4"
Fuse: weight 3.2 lb (AUW target is 8.5lb. I took all of the extra weight out of the fuse to reach this in the sim)
Wings: semi-span 34", aileron deflection 30 deg (real life is near 45 deg but the sim roll rate is too high at that number)
This produces a wing area of 1110 sq in just like the real thing. You get an incredibly low ~17 oz/sqft wingloading just like mine!
Run the sim at 100% speed for good realism.
Tip: to harrier this plane, use a 100% elevator->spoileron mix. I just tried this tonight and it was the first time I was able to harrier the plane (caveat: I'm a novice 3d pilot). I think the mix is needed because it is otherwise nearly impossible to cleanly stall out a wing that is this lightly loaded; you'll get severe wing rocking. I'm going to try this on my real one this weekend.
Happy Flying!
Clark
Corrections: upon further inspection I see that the ailerons on my real F90 do indeed max at 30 degrees, so the sim is actually very accurate re: roll rate. Also I was able to easily harrier my real F90 this evening using a 50% elevator -> spoileron mix so I think the sim mix can be set lower as well...
Another correction: the sim plane doesn't have as much KE coupling as the real thing. But I mix out the coupling on the real thing anyway. (That's why I didn't notice it at first.)
07-21-2005, 08:39 AM
#122
Senior Member
Join Date: Mar 2005
Location: Delft, NETHERLANDS
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
07-23-2005, 03:19 PM
#124
Senior Member
Join Date: Mar 2005
Location: Delft, NETHERLANDS
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUNTANA 90 and Seagull HARRIER 3D .90 ARF??
Votec Delft Bleu.
Do you like a souvenier from me city ???? www.rc-sim.de download site.
The painting on the wings is made by meself .....[8D]
Do you like a souvenier from me city ???? www.rc-sim.de download site.
The painting on the wings is made by meself .....[8D]