G2 Controller Problem
02-09-2003 | 11:22 PM
#1
Thread Starter
Senior Member
Joined: Oct 2002
Posts: 1,405
Likes: 0
Received 1 Like
on
1 Post
From: Salmon ArmBritish Columbia, CANADA
G2 Controller Problem
Hi all!
I just received a cord that allows me to plug my 9C into the game port on my computer for use in sims.
In FMS I was able to re-map all of the channels in the sim to the appropriate stick/switch and fly. In G2, in the "Advanced" section of the contol options panel, there is a selector that you can use to change the channel assignments, but it is greyed out, I cannot make any changes. The controller inputs are getting through because I can see that the the throttle and the ailerons are swapped etc, but I cannot get things straightened out!
Any ideas?
I just received a cord that allows me to plug my 9C into the game port on my computer for use in sims.
In FMS I was able to re-map all of the channels in the sim to the appropriate stick/switch and fly. In G2, in the "Advanced" section of the contol options panel, there is a selector that you can use to change the channel assignments, but it is greyed out, I cannot make any changes. The controller inputs are getting through because I can see that the the throttle and the ailerons are swapped etc, but I cannot get things straightened out!
Any ideas?
02-10-2003 | 04:14 AM
#2
Member
My Feedback: (2)
Joined: Dec 2002
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
From: Monkton,
MD
G2 Controller Problem
In the controller calibration menu, at the top, look for:
Stick Mapping: [choices] - select "Custom"
That will allow you to modify the stick mappings.
Good luck!
Chris Good
Stick Mapping: [choices] - select "Custom"
That will allow you to modify the stick mappings.
Good luck!
Chris Good
