07-15-2002 | 01:44 AM
#1
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
From: Fort Worth, TX
Ken,
If you're using the 33" boom and carbon rod (part#0968-10) from the Extreme kit, my manual states the rods (part#0868-7) should be inserted 26-26.5mm into the carbon rod. It doesn't mention how much is sticking out.
The ball links are to be threaded down 7mm.
Hope this helps.
Raymond
If you're using the 33" boom and carbon rod (part#0968-10) from the Extreme kit, my manual states the rods (part#0868-7) should be inserted 26-26.5mm into the carbon rod. It doesn't mention how much is sticking out.
The ball links are to be threaded down 7mm.
Hope this helps.
Raymond
