Hotspot Throws Needed
07-20-2011 | 06:44 AM
#2
My Feedback: (3)
Joined: Oct 2009
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
From: Athens, GREECE
RE: Hotspot Throws Needed
It's 8mm,but i suggest you to start with 5mm and then trim up elevator if needed.
On my Hotspot started with 5mm and i didn't trim not even one single click!
Kingtech 80 was the turbine on it.
On my Hotspot started with 5mm and i didn't trim not even one single click!
Kingtech 80 was the turbine on it.
07-20-2011 | 06:14 PM
#6
My Feedback: (29)
Joined: Apr 2002
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
From: New Springfield,
OH
RE: Hotspot Throws Needed
I have the single rudder version of the hotspot (flash), from the nuetral postion (5/16 up is now neutral).
These are the starting points from the manual:
elevator is 1 1/2" inch +/-
ailerons is 1" inch +/1
rudder is 1"+ inch (or what ever you want) +/-
I fly with 1 1/4" of elevator, 3/4" ailerons
These are the starting points from the manual:
elevator is 1 1/2" inch +/-
ailerons is 1" inch +/1
rudder is 1"+ inch (or what ever you want) +/-
I fly with 1 1/4" of elevator, 3/4" ailerons
07-21-2011 | 07:21 AM
#7
Thread Starter
My Feedback: (5)
RE: Hotspot Throws Needed
ORIGINAL: Zagzoo
I have the single rudder version of the hotspot (flash), from the nuetral postion (5/16 up is now neutral).
These are the starting points from the manual:
elevator is 1 1/2'' inch +/-
ailerons is 1'' inch +/1
rudder is 1''+ inch (or what ever you want) +/-
I fly with 1 1/4'' of elevator, 3/4'' ailerons
I have the single rudder version of the hotspot (flash), from the nuetral postion (5/16 up is now neutral).
These are the starting points from the manual:
elevator is 1 1/2'' inch +/-
ailerons is 1'' inch +/1
rudder is 1''+ inch (or what ever you want) +/-
I fly with 1 1/4'' of elevator, 3/4'' ailerons
