RE: [Deleted]
 

Ok guys, I've had to step in again and remove some posts from members that feel they have an open license to bash Jet Joe turbines. For those members I will simply state that this isn't the place for that type of post. If you don't like this product that is perfectly fine, go to another thread to post those issues. This thread is for Jet Joe owners to discuss their turbines with each other. For those that like to bash this product I would put forth that  you probably wouldn't like somebody coming into a thread of yours and start to bash what you choose to use., so let's apply that here as these owners don't appreciate it either. So if you only want to bash this product, let's move on down the line and find some place else to discuss it.<div>
</div><div>As this is not the first warning I've had to put out here in this thread I guess I'm going to have to back that up with a little more that a simple suggestion. It's not something that I would prefer to do, however some members have left me little choice. So for any member that wants to come in here and bash Jet Joe even after my warnings those members will be placed on Moderated Status. I do hope that it doesn't come to this, but please know that  I will not hesitate to take such actions for those that choose to ignore my warnings. </div><div>
</div><div>Ken</div>

RE: [Deleted]
 

Amen, thank you Ken. There is plenty of room for other people to start there own
Thread to bash other produtcs. Just my thought.. Chris

RE: JetJoe OWNERS thread
 

Chris have you made any attempt since to start the turbine

RE: JetJoe OWNERS thread
 

Xairflyer,


No attempts yet... want to play it safe and get some sort of co2 device to put out
Any fires if I have one... will be getting one this Friday at the local bike shop...
Co2 tire inflator... but tonight I need to fix my laptop, dang thing has a bad *****
Virus on it and will only boot up in safe mode.... grrrrrr stupid kids and making there
Viruses.... I like to torch there nuts off with my JJ 1200 at full power... :)

RE: JetJoe OWNERS thread
 

At safe mode go to Start/Programs/Accesories/sSystem Tools/ System Restore, then pick a date on the calendar before the virus thing happened click next, then yes and let it do its thing. When it reboots it will tell you system restored to blah blah date and it should be fine.

RE: JetJoe OWNERS thread
 

That's what I was planning on doing when I get home.... if not guess I will have to use my restore disks that I made for it.... so how's work going for ya? I hate my job.....

RE: JetJoe OWNERS thread
 

Join the club bro, it isnt any better down here. I have never seen so many people out of work or doing jobs they would never do just to stay afloat.

RE: JetJoe OWNERS thread
 

Tryin to... well right now I'm working on fixing my laptop , can't do system restore cause my laptop has this software called roxio back on track which is the same thing I guess... but right now its doing the restore thing so hope it works...

RE: JetJoe OWNERS thread
 

Man I sure feel for you guys with jobs that you dont like. Been there before but am very fortunate now.

Chris get that thing fired up and goin.

RE: JetJoe OWNERS thread
 

I know the feeling.. Myself and 2 guys in an IT team spent an entire week fighting conficker when it got into a 150+ machine network last month..
Its a ******* trying to track down the last infected machine in one of 6 sites accross 3 states...

Rob

RE: JetJoe OWNERS thread
 

Rob,

You can call me back now..!! :D

RE: JetJoe OWNERS thread
 

well got it back up and running now... But I still have to go through and rest everything on my laptop... God i hate doing this but oh well

RE: JetJoe OWNERS thread
 

Smithy - just to double-check - I can run my JJ-3000 on pump grade Diesel, yah?

I'm figuring on running a mix of 1lt blue kero to 3lt petrol-station standard diesel - just to thin the mix out a bit. Does that sound half-reasonable? Still only running on the test-bench ATM - the Jet-A1 I'm slowly 'collecting' is for much later on.

Your thoughts??

BJ:)

RE: JetJoe OWNERS thread
 

Just bought a used full auto start JJ1400 here on RCU, except for some tubing and festo fittings it is complete execpt for the on-board propane tank. What does everyone use? On another thread someone posted a pic of his test stand setup and the tank looks like a robart retract tank.

RE: JetJoe OWNERS thread
 

Yes you are correct just copy the set up he has and use a one way Festo check valve to fill the tank.

RE: JetJoe OWNERS thread
 

The tank is not necessary and unless you are familiar with turbines you will have a lot more trouble getting it to start as the gas is much more temperamental.

Until you come competent with running the turbine just connect the gas line to your gas can via a check valve

RE: JetJoe OWNERS thread
 

ok so i have not had a chance to get back to my 1400 since the ECU issue. basically its frying glow plugs in a huge way. when the moniter says "glow test" it blows the plug out. I have the skills to solder however I have no idea whick MOSFET might be gone as i see nothing burned out on the board anywhere.

so now im kinda wondering about replacing the ECU. does anyone know what I can expect to pay for a new Regal? i emailed Gabe however he seems to be really busy and I have not heard back from him other than forwarding my email on.

what would you guys do?

RE: JetJoe OWNERS thread
 

Thanks for the info on the propane and tank guys.

RE: JetJoe OWNERS thread
 

I would not spemd my money on another otdated ECU like the one you have. Go to www.xicoy.com and use that fadec, it is the same one that many of todays turbines use.

RE: JetJoe OWNERS thread
 

Take a picture of the board (both sides) and we might be able to tell you which mosfet.

If you are going to get another, just get one from Gasper.

RE: JetJoe OWNERS thread
 

....if he'll sell you one. I heard that some places won't sell to you if they know are going to put their product on a JJ...

BJ:)

RE: JetJoe OWNERS thread
 

ok.. just tried to start my 1200... everytime i tried it ,did a glow test, ignited the gas, then i can see the kero move to the engine, then ramp then it stoped... the data terminal said "MODEAUTO".... what the hell is that? I have ran it once before.... puzzled....[sm=72_72.gif]
So what do you guys think?..... Chris

RE: JetJoe OWNERS thread
 

here is a pic of my messy test stand... need to redo it dont you think?

RE: JetJoe OWNERS thread
 

What is the voltage on the battery while it is doing this?

RE: JetJoe OWNERS thread
 

It is just telling you it is in auto mode.

It is probably because you have either too much (normal problem) or too little gas. Start of first with very little gas, big mistake most make is too much gas.