I need your help to ID this airplane. I also would like to know if you have the manual what is the CG location and control deflections. Thank you for the help.

Thats the fliton element.

Safe to start cg at the front of the wing tube

Chuck

This airplane has a one piece wing. Do you have the measurement from the wing leading edge to the wing (front edge) tube. Thank you for the help.

Use 25% of the mac.

Chuck

kitfox1,

I have some of the manual pages at home. It has the recommended throws and recommended CG location. I will scan them and send them to you this weekend.

Bill

Thank you. The settings from the manual will give me a good start. This is my first 2 meter airplane and I am installing a YS 160 engine with JR equipment all around. Thanks again for the help.

kitfox1,

Just from looking at the photos in your post the prop on that engine looks like a prop for an electric motor. If it is you don't want to run that engine with that type of prop. For a YS160DZ I would suggest a APC 18.1 x 10 pattern prop and there are other choices also that will work.

Larry

Here are the sheets that I have.

some more,

wildwillie3,
Thank you very much for the manual.