RE: post some pictures of your pattern plane!!
 

Thought I would post a few photos of my other pattern plane. It is a Black Magiv v2. YS 140 DZ with Hatori header and muffler. Flies very well. Good plane not so good pilot.

Ed

RE: post some pictures of your pattern plane!!
 

Look!! It's "The Wife"!!!

RE: post some pictures of your pattern plane!!
 

Scott:

If you are referring to pictures of my plane in post 749, unlike some "wives" this one only cost a few hundred dollars and took six weeks from start to finish. Much less expensive than a "wife". For those that may not know of the history of "the wife", a few weeks ago I made a post on the pattern thread asking for help in naming my new plane. Scott suggested I name it the "Wife" since it was high maintenance, cost lots of money and took way too much of my time :D. LOL

Ed

RE: post some pictures of your pattern plane!!
 

My Spot On 120 with an OS120AX.



http://i283.photobucket.com/albums/k...attle-5278.jpg

RE: post some pictures of your pattern plane!!
 

Hello

Nebula is a personal design of Rémi Le Besque.
Friend of mine Julien bought one kit I built and painted. First flights were done last week. Engine is OS160 FX, Perry pump, 15 % nitro, APC 17x12.

RE: post some pictures of your pattern plane!!
 

Papaone

This is a very nice looking airplane and the colors are great. Well done.

Jim

RE: post some pictures of your pattern plane!!
 

Focus Sport, OS 120 FS, Seen here at the 2010 Camarillo IMAC contest.

RE: post some pictures of your pattern plane!!
 

Here's my latest, a Supra-Fly 40 (scaled down version of the Supra-Fly 45 Unlimited).

OS 46fx for power, it tracks just like my old EZ one.

Still needs the last few decals to be put on it, but you get the general idea.

RE: post some pictures of your pattern plane!!
 

Aesthesis, By Matt Kebabjian

RE: post some pictures of your pattern plane!!
 

<span style="font-family: Courier New;"><span style="font-size: medium;">Aesthesis, bottom view please, pretty please!</span></span>

RE: post some pictures of your pattern plane!!
 

AHA. I think I see a touch of Brio! Matt, Could you give some quick info on your power plant and how well it is working with a widebody? I hope to be installing a Syssa gasser in my son's VF3. It will be replacing the OS160 that just didn't quite pass muster at the top of the big manuevers.
Thanks Matt. Absolutely Beautiful!
Rick

RE: post some pictures of your pattern plane!!
 

Thank you. As widebodies go, this is wider than most and deeper than most. It's a very large airplane for a 2 meter, carrying approximately 1120 sq in of wing area. Span is 78" and length 78 1/2". Weight is 9# 24 ozs on the nose. I used the 17x12 pattern prop for the first flights. Today was rather cool, mid 50's which means molto ponies. Plane was faster than expected or I want. The 18.1x10 is also a very good candidate for it and would slow the plane down to an easier pace.

Engine is the SAP180HP, gasoline 2 stroke on pipe. The pipe is completely enclosed in this model making it very quiet. I am using my own soft mount designed around the engine which requires stand offs on the back plate. The SAP is rear intake and rear exhaust which is ideal for pattern work; very lightweight....approximately 32 ozs for engine, plus 4ozs for the ignition module. I have a whole thread on the SAP for those who don't know such an engine exists, right here in the pattern forum. Also have a construction thread here in the Pattern forum somewhere, about making the soft mount for the rear mount engines on stand offs

RE: post some pictures of your pattern plane!!
 

MattK:

I really like the looks of your plane. Is it an original design? If so what is the construction material? Composite fuse or balsa built up? Foam wings or composite or built up? etc. If you posted it elsewhere and I missed it, I apologize.

Ed

RE: post some pictures of your pattern plane!!
 

Thank you. It's an original design.

The fuselage started out as a Brio fuselage that has a glass foam sandwich construction. Not the best combination of materials. I found the combo extremely easy to dent and ding. A glass balsa sandwich is far superior and would weigh less. I found I need to reinforce the fuse in many places.

Anyway, I removed the Dumbo ears, changed where the wing was located to suit my needs, changed the fin's shape to improve its looks and added a subfin to the fin to improve knife edge handling. Changed how the landing gear are installed and secured to lighten the original Brio set-up and make it far easier to install. This new method is worth a closer look and I will try to show it in a different thread. If I get the energy to do it , that is.

Wings, stab and rudder are original designs. The canards too

RE: post some pictures of your pattern plane!!
 

Oh yeah I forgot that I added 4 degrees of anhedral to the stab. My calculations fell about half degree short at the increased wing dihedral that this much stab anhedral requires to fully counter. There is a very slight adverse roll couple on knife flight. It takes about 2% proverse roll mix (right rudder=right aileron) to fly straight KE.

Not really wanting to build a new wing, I can eliminate the roll mix by adding wing tip appendages, angled to add dihedral, or add a small cannibalizer to the canopy with dihedral on the sub wing. If anything, it will improve knife edge character. Have not yet decided which way to do it.

Actually have not completely rulled out a new wing. The current wing may yet prove too thick a section for my taste. On the other hand the plane has no problem penetrating even in 25 mph wind which is the condition I flew the maiden flights in. The first flight ended in a dead stick in the wrong place which required considerable drag to land

RE: post some pictures of your pattern plane!!
 

Here is a photo of my new pattern plane. It's my own design and it's called the "TALON". I'm really enjoying it.

RE: post some pictures of your pattern plane!!
 

Bn Impulse[img][/img]

RE: post some pictures of your pattern plane!!
 

New for 2012...; going through first calculation. I'll build two versions: "Entry" for 1.10/1.20 engines and F3A for +1.50.
no name yet... any idea?
Regards

RE: post some pictures of your pattern plane!!
 

Two for customers and one for myself, Rapture 50's for both practice and initial entry to competition.

RE: post some pictures of your pattern plane!!
 

Hi together,
Some pics of my SPINELL here !
A great performer with Pletti vectored thrust !
4850 gramms with TP 5000 pro light`s !
see you
Hans

RE: post some pictures of your pattern plane!!
 

Well it's not quite finished yet but heres my scheme for my second Twister which I've only just got around to completing:

Very special thanks go to Darren "Dazza" Mee for the help on nailing the design!

RE: post some pictures of your pattern plane!!
 

My latest Zephyr for use this season.

RE: post some pictures of your pattern plane!!
 

Hello

I'm building a new one named "Avenir"

RE: post some pictures of your pattern plane!!
 

All I got....

Sebart Funtana 140S w/FASST and Hacker C50-14xl, Acro 90 ESC

RE: post some pictures of your pattern plane!!
 

You flew the heck outta that thing in the wind. Cool to see something going that slowly.

Chris...