RE: post some pictures of your pattern plane!!
 

Now if the weather would give me a break I might be able to fly it!! :)

RE: post some pictures of your pattern plane!!
 

I skipped the contest in richmond this weekend so i could finish my new airplane.
its ready to test fly
ys170dz for power.
balsa fuseand foam wing and stab
Dave.</p>

RE: post some pictures of your pattern plane!!
 

Nice looking plane Dave! Your own design?

Todd Schmidt

RE: post some pictures of your pattern plane!!
 

yes it is my own design.
nothing new or earthshatering just wanted to build my own.
i reshaped the cowl and lost the cheeks after this drawing was done
Dave.

RE: post some pictures of your pattern plane!!
 

Looks kind of Nemesis-ish! Very sleek!

RE: post some pictures of your pattern plane!!
 

Looks great Dave! I love the lines of it.

RE: post some pictures of your pattern plane!!
 

Outstanding Dave!

RE: post some pictures of your pattern plane!!
 

hopefully i can test fly it this saturday.
unfortunately i cant make fresno so theres no big hurry to test it.
renegade: yeah, thats not a coincidence.
Dave.

RE: post some pictures of your pattern plane!!
 

pics of my Cursor powered by a Hanno Special and Alliance powered by an OS 1.4

RE: post some pictures of your pattern plane!!
 

Here's some pictures of my Xtreme Composite Pegasus.

GlennO

Australia.

RE: post some pictures of your pattern plane!!
 

Great looking model!

What prop and batts are you using with the Hacker?

RE: post some pictures of your pattern plane!!
 

Hi Bob,

I am using Thunder Power Pro lite V2 5000 packs. The prop is a Hatta special manufactured by Xtreme composite 19x13 wide blade.

The colour scheme is standard from the factory, however the actual colours were chosen by me at an additional cost.

The Q80 rear mount was made locally by a friend of mine as a favour - not commercially available.

I'm very happy with these planes.

cheers GlennO

RE: post some pictures of your pattern plane!!
 

Finally was able to get all 4 of my Wind series planes together at the field.

2 Wind S Pros, Neu Motors, Futaba Equipment
Miss Wind 50e, Hacker A50-16S, Futaba gear
Wind S 50e, Hacker A50-16S Futaba gear.

Arch

RE: post some pictures of your pattern plane!!
 

Here I present to you my new pattern model for the 2011 season, called Bulldog. Three are already flying, two are still being built.
Specifications:
Wingspan: 1880mm
Lenght: 1995mm
Weight: cca 4920g (With Rhino 4900-10s)
Motor: Home made 5330/22 - 216RPM/V, 676g
Propeller: APC 21x14E
ESC: JETI SPIN 99

RE: post some pictures of your pattern plane!!
 

And here are two Bulldogs from my friends.

First one with AXI 5330/F3A and Mejzlik 20,5x12W
Second one with AXI 5325/24 and APC 20x13E

Regards!

Marko

RE: post some pictures of your pattern plane!!
 

here it is,. My old friend from ZN Line.
Integral. Zn line scheme keep rocks !:D

RE: post some pictures of your pattern plane!!
 

what is the diff between a ZN-Line integral and a compy integral?

RE: post some pictures of your pattern plane!!
 

It is basically the same design but ZN also offers a "kit" version that is less prebuilt.

RE: post some pictures of your pattern plane!!
 

Usually ZN is lighter, COMP ARF is all composite, and ZN ara balsa wings and stabs. Comp ARF is a quicker build. The airplanes are identical.

Alejandro P.

RE: post some pictures of your pattern plane!!
 

Here is my Temptation. Started this in 2004 -not a fast builder.

JR 11X with Futaba and JR servos
E-Flite Power 160
Castle 110HV ESC
2x Hyperion 5S 4500 45C batteries
Ultracote
Rustoleum (can with Acetone thinner HVLP sprayer)
Weight: 4.6KG w/battery (that even surprised me)

RE: post some pictures of your pattern plane!!
 

Very nice!

Excellent weight as well, however the Temptation fuselages were very light so that's not too much of a surprise. You must be a light builder!

RE: post some pictures of your pattern plane!!
 

I'm calling this one Laser 2010 as that is when the idea for a semi scale Laser pattern airplane was conceived. It is completely scratch built, the only items that were purchased was the landing gear, wing tube and spinner. The cowl, canopy, wheel pants and tail fairing came from my molds. The wings are foam with balsa sheeting, the fuse is balsa and light ply. She has competed in her first contest where the pictures were taken.

RE: post some pictures of your pattern plane!!
 

This plane rocks!!! What spins the prop? Electric? I cannot conceive anything different from a 4st. in that nose...

RE: post some pictures of your pattern plane!!
 

My new Xigris, built from ZN line kit.

Plettenberg 30-10 Evo, APC 20x13
Kontronik Jive 80+ HV
Turnigy batteries
2x BLS153 in stab
BLS451 rudder
2x 9154 ailerons
Powerbox digiswitch regulator switch
Kokam 800mAh lipo + Jive 6v BEC
Futaba Fasst 2,4 6008 receiver

RE: post some pictures of your pattern plane!!
 

Yes it is electric. My goal was to have a turn key pattern airplane that would be competitive up through advanced class for less then $1,000. The motor is a Turnigy 64mm 235KV with a Turnigy 70A speed control. The batteries are Zippy 5S 5000 MAH. The complete power package was 240.00! So Far I am very pleased with the performance. Prior to the contest she had 6 flights on it and my caller and I had only flown through the advanced sequence once. The end result was a forth out of four but I was 340 points from the first place pilot. So with more practice and tuning I think we can give some guys a run for their money.