TF FW190 GIANT ARF
05-07-2014, 12:55 PM
#2877
My Feedback: (7)
Join Date: Dec 2008
Location: Owatonna,
MN
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Kwik
+1 We are very fortunate I know many flyers who don't have great options. Our club is very welcoming and the members are very helpful. We don't get too wrapped up into rules. We have one rule it is the PP rule. No *****s and No Politics. That is it. All safety rules and practices apply.
Steve-D
I agree with you glassing and painting you plane. If I can get through this season I may just do the same on this plane. I didn't want to take the extra time this go around.
Z
+1 We are very fortunate I know many flyers who don't have great options. Our club is very welcoming and the members are very helpful. We don't get too wrapped up into rules. We have one rule it is the PP rule. No *****s and No Politics. That is it. All safety rules and practices apply.
Steve-D
I agree with you glassing and painting you plane. If I can get through this season I may just do the same on this plane. I didn't want to take the extra time this go around.
Z
05-10-2014, 06:57 PM
#2879
My Feedback: (7)
Join Date: Dec 2008
Location: Owatonna,
MN
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
I mentioned that the gear block let loose a while back. Here is a pic of it and part of how I repaired it. For the adhesive not holding I just worked in CA and clamped. Then reinforced each side of the gear block with 1/8 in dowel pins with 30 min epoxy. Flew it today great flight and no issues with the gear. Just an option for reinforcing that area.
Z
Z
05-10-2014, 07:45 PM
#2880
Member
Join Date: Aug 2013
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
My fw190 have flight with saito fg84r3 very well.
mejzil prop 24-10, 2 Blade
high rpm 6,320
low rpm 1,530
It's wonderful!
http://www.youtube.com/watch?v=L7MEQK5OQUI&feature=share&list=PLgOlluoqJahxH0kzTr0o7YXJTi_qRWsFu It's no music
Enjoy the 4-Stroke radial ICE Sound.
Thank You!
http://youtu.be/pgUHIFaDGuI
My fw190 have flight with saito fg84r3 very well.
mejzil prop 24-10, 2 Blade
high rpm 6,320
low rpm 1,530
It's wonderful!
http://www.youtube.com/watch?v=L7MEQK5OQUI&feature=share&list=PLgOlluoqJahxH0kzTr0o7YXJTi_qRWsFu It's no music
Enjoy the 4-Stroke radial ICE Sound.
Thank You!
http://youtu.be/pgUHIFaDGuI
Last edited by p51fw190f4u; 05-11-2014 at 10:05 PM.
05-12-2014, 10:27 PM
#2890
Member
Join Date: Aug 2013
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
05-14-2014, 10:17 AM
#2895
p51fw190f4u , I tested the FG-84 now, and asked you on youtube on the hesitation from low to high.
You said you fixed it by setting the H-needle to 4 rounds.
Mine was at 3.5 rounds..
So I followed your advice and set the H needle to 4 rounds out.
YES!
The hesitation disappeared, and now I get 6600 rpm with a Mejzlik 24x10.
Thank you so much.
You said you fixed it by setting the H-needle to 4 rounds.
Mine was at 3.5 rounds..
So I followed your advice and set the H needle to 4 rounds out.
YES!
The hesitation disappeared, and now I get 6600 rpm with a Mejzlik 24x10.
Thank you so much.
05-14-2014, 08:37 PM
#2899
Member
Join Date: Aug 2013
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
p51fw190f4u , I tested the FG-84 now, and asked you on youtube on the hesitation from low to high.
You said you fixed it by setting the H-needle to 4 rounds.
Mine was at 3.5 rounds..
So I followed your advice and set the H needle to 4 rounds out.
YES!
The hesitation disappeared, and now I get 6600 rpm with a Mejzlik 24x10.
Thank you so much.
You said you fixed it by setting the H-needle to 4 rounds.
Mine was at 3.5 rounds..
So I followed your advice and set the H needle to 4 rounds out.
YES!
The hesitation disappeared, and now I get 6600 rpm with a Mejzlik 24x10.
Thank you so much.
I am glad to hear your sucess.
I am looking forward to enjoying the wonderful flight and best sound!
Thank you.