CMP BF109F BUILDING THREAD
08-19-2020, 03:45 PM
#2301
My Feedback: (8)
Join Date: Apr 2002
Location: New Mexico USA WA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Just received info from Russell ...... He will make a CMP 109-F custom aluminum spinner for $150 AUD and shipping to the CONUS would be @ $50 AUD.
His design matches the original CMP spinner ( 145mm wide) and so you will have an exact fit. Currently i believe the exchange rate as of 8/19/2020 is @ 72% for AUD to USD. And so you can contact Russell (an excellent person to deal with) via Aero Sport at; [email protected]
His design matches the original CMP spinner ( 145mm wide) and so you will have an exact fit. Currently i believe the exchange rate as of 8/19/2020 is @ 72% for AUD to USD. And so you can contact Russell (an excellent person to deal with) via Aero Sport at; [email protected]
Last edited by Baron Rico; 08-19-2020 at 04:05 PM.
11-05-2020, 06:39 AM
#2302
This summer prepared my 2nd CMP ME 109. This model flies great and certainly its a keeper. Fliies superb and even thou the spinner is not an ME 109 one, in the air at 90+ mph its not noticeable.
The following users liked this post:
WWIIP38 (11-05-2020)
The following users liked this post:
WWIIP38 (11-05-2020)
The following users liked this post:
gonzalobures (11-06-2020)
11-06-2020, 05:31 AM
#2308
WWIIP38 this are some of my German figters of WWII. I have models of other nations also, but the German ones are my favorites.
This is another ME 109 I have. Its from EMS more wingspan than the CMP BF 109.
This is another ME 109 I have. Its from EMS more wingspan than the CMP BF 109.
The following users liked this post:
gonzalobures (11-08-2020)
11-07-2020, 05:56 AM
#2312
I had the shark!@#$ (don't remember the rest of the name) P40. Lost it due to a battery failure. was a great flying plane. The best flying P40 I have seen, Even thou the Topflite flies good, the Shark!@#@$, was a lot better and stable.
This are some photos of mine, may it RIP....
This are some photos of mine, may it RIP....
11-07-2020, 06:03 AM
#2313
WWIIP38, the Meister ME 109 is a piece of art. Looks fantastic. The ME 109 in your hangars picture is the CMP? If it is it does look great. The FW 190 and Mustang also.
I have 3 Mustangs. One has been in the almost finished step for some years. A topFlite witth a 3W 55. The other 2 are of the same kit, which I don't know who they are since it was agift from a friend. Both have fiberglass fuselages, not common in the 90's when they gave them to me. One of them, the Tuskegee Bunnie, finished 3rd in the Puerto Rico Coqui Nationals in the 90's.
I don't have electronic photos of those two planes to share. Not available at the time. I have scanned the photos on the documentation packages of both planes.
I have 3 Mustangs. One has been in the almost finished step for some years. A topFlite witth a 3W 55. The other 2 are of the same kit, which I don't know who they are since it was agift from a friend. Both have fiberglass fuselages, not common in the 90's when they gave them to me. One of them, the Tuskegee Bunnie, finished 3rd in the Puerto Rico Coqui Nationals in the 90's.
I don't have electronic photos of those two planes to share. Not available at the time. I have scanned the photos on the documentation packages of both planes.
Last edited by gonzalobures; 11-07-2020 at 06:21 AM.
11-07-2020, 06:04 AM
#2314
My Feedback: (43)
I had the shark!@#$ (don't remember the rest of the name) P40. Lost it due to a battery failure. was a great flying plane. The best flying P40 I have seen, Even thou the Topflite flies good, the Shark!@#@$, was a lot better and stable.
This are some photos of mine, may it RIP....
This are some photos of mine, may it RIP....
The following users liked this post:
WWIIP38 (11-07-2020)
11-07-2020, 06:29 AM
#2316
WWIIP38, my P40N had a DLE 55 rear exhaust and also Sierra retracts. I loved that plane. I landed superb not like other P40's that land as a AT6 hopping like Kangoroos.
The following users liked this post:
WWIIP38 (11-07-2020)
12-28-2020, 05:23 AM
#2319
Flying on 12/23/20
4 short videos taken on 12/23/20 while flying with friend Rafael Badillo. Rafael is flying his Spitfire and I am flying my ME 109.
Fly by Rafael's Spitfire followed by ME 109:
Rafael landing his Spitfire and flyby of ME 109
ME 109 landing
4 short videos taken on 12/23/20 while flying with friend Rafael Badillo. Rafael is flying his Spitfire and I am flying my ME 109.
Fly by Rafael's Spitfire followed by ME 109:
Rafael landing his Spitfire and flyby of ME 109
ME 109 landing
The following users liked this post:
WWIIP38 (12-28-2020)
02-02-2021, 01:44 PM
#2320
Junior Member
Join Date: Feb 2021
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
CMP BF109F Manual/Build Instructions
Does anyone have a pdf of the building instructions for this plane? I just got it from a friend but it was never built and I have no book for it.
02-03-2021, 08:45 AM
#2322
Junior Member
Join Date: Feb 2021
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Instruction Manual for CMP BF109F
05-30-2021, 02:50 PM
#2325
My Feedback: (2)
Join Date: Jul 2003
Location: Brisbane, QLD, AUSTRALIA
Posts: 2,787
Likes: 0
Received 8 Likes
on
4 Posts
I have a DLE-35ra sitting there that I got for this kit, but got the feeling from this thread that it would be too heavy for this model so I’ve got my hands on a RCGF 26cc beam mount which is a far easier to install proposition.
ive just started fitting it to the fuse so can’t give you any advise on how it’s going to fly.
thanks
dave
ive just started fitting it to the fuse so can’t give you any advise on how it’s going to fly.
thanks
dave