RE: CMP 120 Zero ARF Build thread
 

Last weekend I installed box for switches inside the fuselage and began with rivets and plateful. The size of the rivets it´s not very good, but I am building semi-scale aircraft not scale. These rivets are rest of the rivets which I used for my Bf-109G three years ago, so I used it. I will continue next weekend with the wings. Now I am dealing problem with spinner, because Zero´s spinner had specific shape. I thinking about some spinner from ESM. http://www.ytinternational.co.uk/spinner/spinners.htm

RE: CMP 120 Zero ARF Build thread
 

Try this supplier. Type 4 spinner is for the Zero.

http://www.theworldmodels.com/para/i.../pdf_a/1-2.pdf


Home page

http://www.theworldmodels.com/para/index.php

RE: CMP 120 Zero ARF Build thread
 

I thought you might like to see the cockpit out of my 50cc cmp that I am working on. It might inspire you to put in a full cockpit instead of a picture of a cockpit. It is a lot of work, but I think it is worth it.

RE: CMP 120 Zero ARF Build thread
 

Nice job Moldeflafer. It is possible to do full cockpit in 50 cc CMP Zero. Problem is that this one is small version of CPM and there is no space to put all servos under cockpit.
It can be done, but I think tat this one is too small for this kind of scale element.

RE: CMP 120 Zero ARF Build thread
 

Frets, thank you for the link, I can try it.

Modelflyer, your Zero looks very nice and I know, that full cockpit is better than picture. It looks better, but my Zero is "on the second" place for me. I want to done as soon as it is possible. It should looks nice only on the first time. I don´t use to visit any airshows, because it is very far away for me.
The second reason is that I have fuel tank and servos under the cockpit. Can you send more pictures of your Zero? What engine do you have?

RE: CMP 120 Zero ARF Build thread
 

You can try these guys as well , I think the Fw190 spinner and Zero are very similar , I bought mine from this link www.sdshobby.com,

RE: CMP 120 Zero ARF Build thread
 

Good call LDM, I have meaning to try one of these myself. Just wish they had some for 3 blade.

Here is a quicker direct link; Top three are for 50cc size and bottom three are close enough to our size to look good:)


http://www.sdshobby.net/Wholesale-Di...ane_c2794.html

RE: CMP 120 Zero ARF Build thread
 

WOW!!! Is that the price one should expect to pay for a 4.5" spinner now ? I'm sure they are good quality, but still I didn't know inflation is that bad in the US. And all I hear in the news is the EU crisis... [X(]:D;)

RE: CMP 120 Zero ARF Build thread
 

That company is in and ships from China, not the US

RE: CMP 120 Zero ARF Build thread
 

OMG! [8D] Child labor is getting somewhat expensive :(

RE: CMP 120 Zero ARF Build thread
 

When I saw the prices of the spinners, I´ve bagan drawing spinner myself. It will be aluminum spinner, maybe dural, because I don´t have tu save any weight on the nose of the aircraft. I think, that it will be cheaper than spinner in the shop.

RE: CMP 120 Zero ARF Build thread
 

you start making a aluminum ones and you will have the market.. put me down for one for my 50cc zero

RE: CMP 120 Zero ARF Build thread
 

looking darn good Matt..

RE: CMP 120 Zero ARF Build thread
 

I think that you can't make spinner cheaprer then this folks...here is a link http://www.sdshobby.net/aluminum-all...mm-p-1015.html. It's not 100% scale but is pretty good. I will buy one for mine 50cc Zero.

RE: CMP 120 Zero ARF Build thread
 

There's an 'ole saying,,, "Nothing cures high prices better than high prices"

RE: CMP 120 Zero ARF Build thread
 

A don´t have any experience with shopping in the USA, so I don ´t know how much costs shipping to middle Europe. I am able to make my spinner less than 20USD.
http://www.topmodelcz.cz/index.php?&...etail&id=13750 this one very similar to spinner, which you showed me but it costs cca 20 USD.

RE: CMP 120 Zero ARF Build thread
 

hmm that one is pretty far off. youd be better off with the P-51 spinner

RE: CMP 120 Zero ARF Build thread
 

Now it is done. Tomorrow I can change to technical drawing and contact my colleage and ask him how much it will be cost.

RE: CMP 120 Zero ARF Build thread
 

Here is what I did on my Zero. I have used similar spinner to this ones

http://shop.lindinger.at/product_inf...ducts_id=48161

http://shop.lindinger.at/product_inf...ducts_id=44909

mine is even bigger 95mm diameter but for me it is not ugly because I do not have dummy engine so there is not big hole in front of engine.
Good think is that there is enough air flow or cooling engine and i did not have to cut lot of canopy for air to go out.
As you know, exit hole has to be at least 2,5 times bigger than intake. And of course, at that price you do not have to make it.

http://img822.imageshack.us/img822/7637/19962123.jpg

http://img683.imageshack.us/img683/6347/51501704.jpg

http://img715.imageshack.us/img715/2535/dscn2133h.jpg

http://img268.imageshack.us/img268/8531/dscn2132v.jpg

http://img40.imageshack.us/img40/5840/dscn2131d.jpg

RE: CMP 120 Zero ARF Build thread
 

yeah indeed. that spinner will look great sitting infront of my cowl....

RE: CMP 120 Zero ARF Build thread
 

He, he, you my friend do not need spinner to close look on that radial. :)

RE: CMP 120 Zero ARF Build thread
 

i see your piont my friend.. but she's got to be 100% scale ya know.. it will give the lookie lose something to look at up close

RE: CMP 120 Zero ARF Build thread
 

Prekin if you get into the spinner business I want an Fw190 one :) , no bolt on junk , I want to use screws into the base from the side of the cone , the good old fashion way -scale look .
As far as the cheaper silver looking one for $11.00 its just looks off on a Zero , its too pointy :D

RE: CMP 120 Zero ARF Build thread
 

ditto for the Zero one... and un cut for the blades to someone can choose from 2 or 3 blade

RE: CMP 120 Zero ARF Build thread
 

LDM, here is your spinner for FW-190. I prepare it for three blades propeller and thre screws in the base.