21 Tunnel Talk
#227
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Hey Gang,
Build season is just round tha corner, So what ya got planed?
For me I've really got to think ahead cause both my local hobbies supply's got blown away in storm's we had a few months back.
I can order in some stuff but not tha same as hands on, like picking wood and such. Closest one now is bout 65 miles away.
Gene
Tha JAE kits are a hot ticket for one example........
Build season is just round tha corner, So what ya got planed?
For me I've really got to think ahead cause both my local hobbies supply's got blown away in storm's we had a few months back.
I can order in some stuff but not tha same as hands on, like picking wood and such. Closest one now is bout 65 miles away.
Gene
Tha JAE kits are a hot ticket for one example........
#228
My Feedback: (1)
RE: 21 Tunnel Talk
Gener, I've got a bunch of Joe Petro's kits, two JAE .12's, a .21 and the gas version. Most of them have become dust collectors as they were built over a year ago and have never seen water except for the gasser which I raced at the Gas Nat's a few weeks ago. I picked up some cowls from David Preusse at the Hobart Indy Master's race and yesterday to kill time, installed one on the .21.
#230
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Hey Guys,
Yea those kits are popular fer sure!
I've tossed round the idea of another .12 myself,
Gene
Couple shots from VS1 build.......
Yea those kits are popular fer sure!
I've tossed round the idea of another .12 myself,
Gene
Couple shots from VS1 build.......
#232
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Hey kemosawbe,
Hmmmm........Ok yea might be cool,
Few quick edits and might even have a pic er two,
Glenn Q had a cool lil shovelnose, was thinking bout too..........
Gene
Hmmmm........Ok yea might be cool,
Few quick edits and might even have a pic er two,
Glenn Q had a cool lil shovelnose, was thinking bout too..........
Gene
#233
Senior Member
Join Date: Jul 2011
Location: San Diego,
CA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: 21 Tunnel Talk
Well, I finally got back to my boat after a month too busy to work on it! Sanded the hull from the first coat of clear, and applied a second coat. Also sprayed the VS1 cowl orange. The rear of the cowl is going to be purple. But it's raining today. So unless it stops, there's not painting.
#234
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Hey Danny,
Cool, glad to hear your making progress, rained and thunder here too biggest part of tha nite.
Power went off like six times........ Sheeeesh!
Gene
Cool, glad to hear your making progress, rained and thunder here too biggest part of tha nite.
Power went off like six times........ Sheeeesh!
Gene
#235
Senior Member
Join Date: Jul 2011
Location: San Diego,
CA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: 21 Tunnel Talk
Yeah, I wanted to get this boat running by mid-october and that's come and gone pretty much. But I'm in no hurry.
I just finished redesigning the logo for FloatWays and I want to make some stickers to put on the boat. Unfortunately, the brand colors will not included orange (and I already painted the cowl orange). Ha! But it is what it is.
Once I get the stickers made and applied, I can apply the very final clearcoat and then the build's all downhill from there.
I just finished redesigning the logo for FloatWays and I want to make some stickers to put on the boat. Unfortunately, the brand colors will not included orange (and I already painted the cowl orange). Ha! But it is what it is.
Once I get the stickers made and applied, I can apply the very final clearcoat and then the build's all downhill from there.
#238
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Yea I got like 270 in my V1,
If you used a 25-50 off with some other stuff, There's ya good deal.
Gene
Final mods now deceide on transom bracing......
If you used a 25-50 off with some other stuff, There's ya good deal.
Gene
Final mods now deceide on transom bracing......
#239
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Going to keep it simple, Extra support for transom forward to center section,
Finally got the camera to work again........
Gene
Finally got the camera to work again........
Gene
#241
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Hey Danny,
Yeah I can usually run here till late december.
Long as I get some dial in runs before tha snow flies, Im cool with that.
Graphics next on my list,
Gene
Note......... Some of the stock tank mount parts were warped so bad there not usable.
I'll get a Std Dubro tank and couple nylon tye wraps to the brace and done.
Yeah I can usually run here till late december.
Long as I get some dial in runs before tha snow flies, Im cool with that.
Graphics next on my list,
Gene
Note......... Some of the stock tank mount parts were warped so bad there not usable.
I'll get a Std Dubro tank and couple nylon tye wraps to the brace and done.
#242
Senior Member
Thread Starter
RE: 21 Tunnel Talk
Something totally new........
From Mic H. special Shaman SAW cowl for added downforce.
Needed for 65+ mph, No word on production, Still under testing.
Nice work Mic!
Gene
From Mic H. special Shaman SAW cowl for added downforce.
Needed for 65+ mph, No word on production, Still under testing.
Nice work Mic!
Gene
#244
Senior Member
Thread Starter
RE: 21 Tunnel Talk
From a post at another forum the question was asked,
What is too hot head temp for OS XM 21 watercooled outboard ?
JD reply'd, 175 to 200 being ballpark and might have to restrict flow to get that.
Shane M. stated in all 5 of his OS outboards he did not run the cooling line,
And head temps in the 160's was the norm after his racing heats, Now thats with Grimracer 50% boat fuel.
Mike Z has stated the oil package is way ahead of its time, the content is more also.
Seems for a opt head temp its the A/C head on Ver 2, Or a aftermarket one............
Gene
What is too hot head temp for OS XM 21 watercooled outboard ?
JD reply'd, 175 to 200 being ballpark and might have to restrict flow to get that.
Shane M. stated in all 5 of his OS outboards he did not run the cooling line,
And head temps in the 160's was the norm after his racing heats, Now thats with Grimracer 50% boat fuel.
Mike Z has stated the oil package is way ahead of its time, the content is more also.
Seems for a opt head temp its the A/C head on Ver 2, Or a aftermarket one............
Gene
#245
Senior Member
Thread Starter
RE: 21 Tunnel Talk
For any Intlwaters members........
The site will be down bout 6 hours for a server OS upgrade,
Tom said this was necessary cause the old version is no longer supported.
Should start 9:00 am EST today,
Gene
The site will be down bout 6 hours for a server OS upgrade,
Tom said this was necessary cause the old version is no longer supported.
Should start 9:00 am EST today,
Gene
#246
Senior Member
Thread Starter
RE: 21 Tunnel Talk
I've got the bolts and plate reversed for measuring a transom spacer,
Max length transom to drive dog before it starts to hook is round 6.50".
Stock OSXM is bout 5.75"
Gene
Couple current pics..........
Max length transom to drive dog before it starts to hook is round 6.50".
Stock OSXM is bout 5.75"
Gene
Couple current pics..........
#247
Senior Member
Join Date: Jul 2011
Location: San Diego,
CA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: 21 Tunnel Talk
Hey guys, I finally got around to deciding on the graphics for the boat... I'm going to try and get the stickers cut locally 'cause I need them soon. I have a few days off for Christmas and I'm hoping to finish the boat then. Otherwise, I was going to have a friend (from here and intlwaters) to cut the stickers for me. But he's a little far and with how slow USPS is right now I'm not sure they would get here in time.
Check out the look... (Photoshopped)
Check out the look... (Photoshopped)
#250
Senior Member
Join Date: Jul 2011
Location: San Diego,
CA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: 21 Tunnel Talk
Who do you guys use for cutting vinyl stickers? The local shops here are quoting way too high. I remember seeing sign sign shops post in one of the forums offering vinyl sticker services, but I can't remember where I saw it.