61FX / Davis Pipe
10-22-2002 | 05:45 PM
#1
Thread Starter
Senior Member
My Feedback: (34)
Joined: Mar 2002
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
From: Gilbert,
AZ
61FX / Davis Pipe
61 FX / Power masters 15% nitro with a Davis Quite Pipe...
11,100 Running an 12X10 pattern prop. This puts my OS 91 FX to shame ;-)
Tim
11,100 Running an 12X10 pattern prop. This puts my OS 91 FX to shame ;-)
Tim
10-28-2002 | 06:01 AM
#3
Thread Starter
Senior Member
My Feedback: (34)
Joined: Mar 2002
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
From: Gilbert,
AZ
61FX / Davis Pipe
The Davis pipe is about 130 bucks, and not as good as the MAC. I would simply order a MAC pipe and header. 60 bucks, and you are screaming. If you are are trying to quite it down, go with the Macs quite pipe... both are good choices. Tower has them.
Tim
Tim
11-04-2002 | 03:01 AM
#4
Senior Member
My Feedback: (9)
Joined: Feb 2002
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
From: Sacramento,
CA
61FX
-----Or get a Performance Plus tuned muffler! You will pick up 500 -
1500 RPM, depending on the prop you are turning, I can guarantee it! Mine will turn a Scimitar 12-6 at 14k and an APC 11-7 at 15500! This on Wildcat Plus 15%. In the air it sounds like it picks up quite a few more revs.
1500 RPM, depending on the prop you are turning, I can guarantee it! Mine will turn a Scimitar 12-6 at 14k and an APC 11-7 at 15500! This on Wildcat Plus 15%. In the air it sounds like it picks up quite a few more revs.
08-22-2003 | 04:58 PM
#7
Senior Member
Joined: Jan 2002
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
From: Spring Valley, CA
08-22-2003 | 05:28 PM
#8
My Feedback: (62)
Joined: Dec 2001
Posts: 3,857
Likes: 0
Received 0 Likes
on
0 Posts
From: Vineland,
NJ
Nuts
There isn't a performance pipe available for my Rossi .60. Actually I got this engine from Morris years ago and used it for about a dozen flights. I have the Rossi pipe, but was hoping for something a bit lighter. Any ideas Ray? Thanks_bob
