Revo Dismay
04-03-2005, 09:04 PM
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Oct 2004
Location: Glenwood, IA
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
Revo Dismay
Ok revo owners. I got some bad news. Had a run of bad luck with mine lately. The carb is binding up and won't open all the way and it won't shift now. My question is what is the factory settings for the LSN/HSN?
04-04-2005, 01:16 AM
#4
Senior Member
My Feedback: (-1)
Join Date: Feb 2005
Location: Spokane, WA
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
RE: Revo Dismay
hey if youre having problems with the carb, either you got a dud, or you havent been doing after run maint.
i do it after every run, no matter how long the truck is gonna be sitting. Pull the plugwire & drop some after & WD 40 in there, then run the EZ Start for 2-3 sec and then do the same with the carb and repeat. this should keep u running very smoothly, ive found that response is also better when WD 40 is used.
i do it after every run, no matter how long the truck is gonna be sitting. Pull the plugwire & drop some after & WD 40 in there, then run the EZ Start for 2-3 sec and then do the same with the carb and repeat. this should keep u running very smoothly, ive found that response is also better when WD 40 is used.
04-04-2005, 07:53 AM
#6
My Feedback: (3)
Join Date: Feb 2005
Location: Opelika,
AL
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
RE: Revo Dismay
can you move the slide in/out by hand? try pulling the carb off and checking it out. maybe yer truck was nervouse didn't feel like racing. I KNOW ITS SCARED
. try working it w/o the linkage. what did traxxas say if you get some guy named Will hange up and call again.
. try working it w/o the linkage. what did traxxas say if you get some guy named Will hange up and call again.
