THE LOUNGE 2
Senior Member
RE: THE LOUNGE 2
ORIGINAL: hunter306
Harbor Freight Tool. I think you can get the same deals on ebay though, if you don't have one around here.
ORIGINAL: mechanizeddeath
hunter, where'd you get that? i was thinking the other day how nice it would be to have one of those when i was measuring the diameter of the Brat's steering rods.
ORIGINAL: hunter306
Purists would have me reading the ol'e scale, but I can't say that I care about the actual measurement... I'm using it to compare two lengths.
In that case, it's easier to set and forget with the digi
ORIGINAL: Lunchboxer
LOL, so lazy, digital read out... ha!
LOL, so lazy, digital read out... ha!
In that case, it's easier to set and forget with the digi
Senior Member
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Hard to believe that there's enough gap on the servo case to get in that much water!! [X(]
Hard to believe that there's enough gap on the servo case to get in that much water!! [X(]
ORIGINAL: mechanizeddeath
actually it does, there's nothing wrong with it besides cosmetics, and once i replace the case it will look brand new, aside from some scuffing on the wires from the skidplate.
i've heard that some people don't seal their servos, but when i opened one of mine, a bunch of muddy water poured out of the gearbox. lol!
actually it does, there's nothing wrong with it besides cosmetics, and once i replace the case it will look brand new, aside from some scuffing on the wires from the skidplate.
i've heard that some people don't seal their servos, but when i opened one of mine, a bunch of muddy water poured out of the gearbox. lol!
Senior Member
My Feedback: (31)
Join Date: Jul 2005
Location: moundsville,
WV
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: B44RacerEX
CEN is awesome IF you like nitro.
CEN is awesome IF you like nitro.
cen is awesome all the way around.. nitro AND electric .. they do have those you know
RE: THE LOUNGE 2
Submerged?! Ah, hmm... okay....
ORIGINAL: mechanizeddeath
lol, well considering i had it submerged for several minutes total... i guess i'm not surprised! i think the biggest problem was it was in a runoff puddle, with road salt in it no doubt. fresh water, even muddy fresh water, isn't nearly as corrosive as people think. heck, training aircraft that crashed into Lake Michigan during WWII are still down there, basically intact.
lol, well considering i had it submerged for several minutes total... i guess i'm not surprised! i think the biggest problem was it was in a runoff puddle, with road salt in it no doubt. fresh water, even muddy fresh water, isn't nearly as corrosive as people think. heck, training aircraft that crashed into Lake Michigan during WWII are still down there, basically intact.
Senior Member
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Submerged?! Ah, hmm... okay....
Submerged?! Ah, hmm... okay....
ORIGINAL: mechanizeddeath
lol, well considering i had it submerged for several minutes total... i guess i'm not surprised! i think the biggest problem was it was in a runoff puddle, with road salt in it no doubt. fresh water, even muddy fresh water, isn't nearly as corrosive as people think. heck, training aircraft that crashed into Lake Michigan during WWII are still down there, basically intact.
lol, well considering i had it submerged for several minutes total... i guess i'm not surprised! i think the biggest problem was it was in a runoff puddle, with road salt in it no doubt. fresh water, even muddy fresh water, isn't nearly as corrosive as people think. heck, training aircraft that crashed into Lake Michigan during WWII are still down there, basically intact.
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Yes, everyone should have a caliper!
Course, I have like 7 in my filing cabinet a work, I could take another...
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Had a little fire goin in my buddie's EXT...
He wanted to swap out the stock unit with my Tazer 12T I had laying around, bought it last Oct. at the same place I bought the Mtroniks RV-15. So we put it in there, got it all nice and neat, but we couldn't figure out why reverse wasn't working. Keep in mind that when the Mtroniks ESC blew, promply before reverse started to act up, and I was around the same person....
Well anyway, it was fine for a little while, then reverse started to not want to function. We couldn't find the solution, so we shrugged it off. I called him over while he was driving it, to look at something on my FXT, then a few seconds later he looks over and sees what looks to be some kind of red smoke grenade set off on my driveway....
Funny though, I used the receipt for the Mtroniks' warranty replacement, so I can't replace the Tazer now...and same exact thing happened with the same person.[&:]
So here's the pic:
The case held up pretty well, so no damage was done to the car. There were a couple flames though, and this thing just sat there smoldering with a LOT of smoke (with some red to it) for about 3 minutes, I think it was. I went to unplug the battery, and instead I just ripped out the wires off the ESC where the solder melted and dripped off...
This thing is junk cause the ESC set button won't work now.
He wanted to swap out the stock unit with my Tazer 12T I had laying around, bought it last Oct. at the same place I bought the Mtroniks RV-15. So we put it in there, got it all nice and neat, but we couldn't figure out why reverse wasn't working. Keep in mind that when the Mtroniks ESC blew, promply before reverse started to act up, and I was around the same person....
Well anyway, it was fine for a little while, then reverse started to not want to function. We couldn't find the solution, so we shrugged it off. I called him over while he was driving it, to look at something on my FXT, then a few seconds later he looks over and sees what looks to be some kind of red smoke grenade set off on my driveway....
Funny though, I used the receipt for the Mtroniks' warranty replacement, so I can't replace the Tazer now...and same exact thing happened with the same person.[&:]
So here's the pic:
The case held up pretty well, so no damage was done to the car. There were a couple flames though, and this thing just sat there smoldering with a LOT of smoke (with some red to it) for about 3 minutes, I think it was. I went to unplug the battery, and instead I just ripped out the wires off the ESC where the solder melted and dripped off...
This thing is junk cause the ESC set button won't work now.
Join Date: Feb 2007
Location: Owensboro, KY
Posts: 5,527
Likes: 0
Received 0 Likes
on
0 Posts
Senior Member
RE: THE LOUNGE 2
ORIGINAL: paintstikker
Had a little fire goin in my buddie's EXT...
He wanted to swap out the stock unit with my Tazer 12T I had laying around, bought it last Oct. at the same place I bought the Mtroniks RV-15. So we put it in there, got it all nice and neat, but we couldn't figure out why reverse wasn't working. Keep in mind that when the Mtroniks ESC blew, promply before reverse started to act up, and I was around the same person....
Well anyway, it was fine for a little while, then reverse started to not want to function. We couldn't find the solution, so we shrugged it off. I called him over while he was driving it, to look at something on my FXT, then a few seconds later he looks over and sees what looks to be some kind of red smoke grenade set off on my driveway....
Funny though, I used the receipt for the Mtroniks' warranty replacement, so I can't replace the Tazer now...and same exact thing happened with the same person.[&:]
The case held up pretty well, so no damage was done to the car. There were a couple flames though, and this thing just sat there smoldering with a LOT of smoke (with some red to it) for about 3 minutes, I think it was. I went to unplug the battery, and instead I just ripped out the wires off the ESC where the solder melted and dripped off...
This thing is junk cause the ESC set button won't work now.
Had a little fire goin in my buddie's EXT...
He wanted to swap out the stock unit with my Tazer 12T I had laying around, bought it last Oct. at the same place I bought the Mtroniks RV-15. So we put it in there, got it all nice and neat, but we couldn't figure out why reverse wasn't working. Keep in mind that when the Mtroniks ESC blew, promply before reverse started to act up, and I was around the same person....
Well anyway, it was fine for a little while, then reverse started to not want to function. We couldn't find the solution, so we shrugged it off. I called him over while he was driving it, to look at something on my FXT, then a few seconds later he looks over and sees what looks to be some kind of red smoke grenade set off on my driveway....
Funny though, I used the receipt for the Mtroniks' warranty replacement, so I can't replace the Tazer now...and same exact thing happened with the same person.[&:]
The case held up pretty well, so no damage was done to the car. There were a couple flames though, and this thing just sat there smoldering with a LOT of smoke (with some red to it) for about 3 minutes, I think it was. I went to unplug the battery, and instead I just ripped out the wires off the ESC where the solder melted and dripped off...
This thing is junk cause the ESC set button won't work now.
i've been lucky, so far i've mostly damaged servos. [&:]
Join Date: Feb 2007
Location: Owensboro, KY
Posts: 5,527
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: turbotb0205
cen is awesome all the way around.. nitro AND electric .. they do have those you know
ORIGINAL: B44RacerEX
CEN is awesome IF you like nitro.
CEN is awesome IF you like nitro.
cen is awesome all the way around.. nitro AND electric .. they do have those you know
Coverting the CEN matrix buggy into an electric.
Then since I wanna experiment with Mugen also, make a brushless Truggy>MBX5 TRUGGY.
Wouldnt that be an awesome combo.[8D]
Join Date: Feb 2007
Location: Owensboro, KY
Posts: 5,527
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
The mugen sponsership guy's 501x...yes sir, he races Tamiya and Mugen.
He going to winternats so I wont see him again until golfland starts racing again.[&o]
It's too bad he cannot go to the Winterblast with me?
He gonna be doing the mugen nitro thing while im in Albion Feb 17th.
He going to winternats so I wont see him again until golfland starts racing again.[&o]
It's too bad he cannot go to the Winterblast with me?
He gonna be doing the mugen nitro thing while im in Albion Feb 17th.
Join Date: Feb 2007
Location: Owensboro, KY
Posts: 5,527
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
The truggy I want isnt cheap, but still cheaper than a St-r 777 Kyosho.
http://www3.towerhobbies.com/cgi-bin...&I=LXNNA6&P=ML
http://www3.towerhobbies.com/cgi-bin...&I=LXNNA6&P=ML
Join Date: Feb 2007
Location: Owensboro, KY
Posts: 5,527
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
And the 8th scale buggy I want.
http://www3.towerhobbies.com/cgi-bin...?&I=LXSWN9&P=7
150 bucks cheaper than the truggy.
Id like to have both though![8D]
http://www3.towerhobbies.com/cgi-bin...?&I=LXSWN9&P=7
150 bucks cheaper than the truggy.
Id like to have both though![8D]
RE: THE LOUNGE 2
Paint,
That's crazy that the ESC blew up just like that while it was working okay before.. usually that's just not how electronic would go bad... is it loading up too much w/ a hot motor? Or?
Hope you can get it fixed somehow.... [:'(]
That's crazy that the ESC blew up just like that while it was working okay before.. usually that's just not how electronic would go bad... is it loading up too much w/ a hot motor? Or?
Hope you can get it fixed somehow.... [:'(]
Senior Member
RE: THE LOUNGE 2
ORIGINAL: mechanizeddeath
actually there is a harbor freight nearby me, not far from the LHS in fact. thanks, i'll probably pick one up this week! how much was it btw?
ORIGINAL: hunter306
Harbor Freight Tool. I think you can get the same deals on ebay though, if you don't have one around here.
ORIGINAL: mechanizeddeath
hunter, where'd you get that? i was thinking the other day how nice it would be to have one of those when i was measuring the diameter of the Brat's steering rods.
ORIGINAL: hunter306
Purists would have me reading the ol'e scale, but I can't say that I care about the actual measurement... I'm using it to compare two lengths.
In that case, it's easier to set and forget with the digi
ORIGINAL: Lunchboxer
LOL, so lazy, digital read out... ha!
LOL, so lazy, digital read out... ha!
In that case, it's easier to set and forget with the digi
RE: THE LOUNGE 2
Met up w/ AutoXMan today and ran some RCs!
2 T-Eggs and 2 WW-2s! Threw in the Blizzard for good measure.. let AutoXMan drive it around a little bit... ha!
It was fun!!
Senior Member
Join Date: Dec 2006
Location: Nuremberg, GERMANY
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Met up w/ AutoXMan today and ran some RCs!
2 T-Eggs and 2 WW-2s! Threw in the Blizzard for good measure.. let AutoXMan drive it around a little bit... ha!
It was fun!!
Met up w/ AutoXMan today and ran some RCs!
2 T-Eggs and 2 WW-2s! Threw in the Blizzard for good measure.. let AutoXMan drive it around a little bit... ha!
It was fun!!
Had some fun myself. Some filmstills from my Stealth Bear Hawk videos I took today:
Senior Member
My Feedback: (31)
Join Date: Jul 2005
Location: moundsville,
WV
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
well i suppose you could convert one to electric.. or you could just buy an electric cen..
as far as a conversion goes revofreak and i already build a brushless cen matrix truggy arena FRE
feigao 8xl mamba max esc 12 cells
as far as a conversion goes revofreak and i already build a brushless cen matrix truggy arena FRE
feigao 8xl mamba max esc 12 cells
Senior Member
Join Date: Dec 2006
Location: Nuremberg, GERMANY
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
LB, how did your and AutoXMans Touaregs compare with the different wheel setups?
Must be fun to run them together!
ORIGINAL: Lunchboxer
Met up w/ AutoXMan today and ran some RCs!
2 T-Eggs and 2 WW-2s! Threw in the Blizzard for good measure.. let AutoXMan drive it around a little bit... ha!
It was fun!!
Met up w/ AutoXMan today and ran some RCs!
2 T-Eggs and 2 WW-2s! Threw in the Blizzard for good measure.. let AutoXMan drive it around a little bit... ha!
It was fun!!