engine problem
#1
Thread Starter
Member
Joined: Mar 2008
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
From: buffalo valley, TN
MY motor runs fine at full throttle, but when I let off the throttle and it will not idle, it stalls. Im pretty sure the needle valve is tuned properly, but I could be wrong.
#2
Check your idle adjustment screw and/or the throttle linkage and trim. Basically you want to make sure that the carb is NOT being fully closed when it should be idling. With the engine off, remove the air filter and take a peek. At neutral, the carb should be cracked open a bit to allow an idle.



