POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
05-14-2011 | 06:01 PM
#2551
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
There really are some awesome cars in here!
I'm getting back into messing with my RS4 lately and got a list of HPI part #'s together for an Evo X shell,intercooler/muffler,and the molded GT wing.I'll be sure to put pics up when it's finished but I have to order it all still so it'll be a few weeks. I'm pretty excited to start messing with the car again,I had just got a set of drift tires for it when I shifted interests a few years ago and now I'll actually get to use them,haha.
I'm getting back into messing with my RS4 lately and got a list of HPI part #'s together for an Evo X shell,intercooler/muffler,and the molded GT wing.I'll be sure to put pics up when it's finished but I have to order it all still so it'll be a few weeks. I'm pretty excited to start messing with the car again,I had just got a set of drift tires for it when I shifted interests a few years ago and now I'll actually get to use them,haha.
05-15-2011 | 08:50 PM
#2553
Member
Joined: May 2011
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
From: visalia, CA
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
Black, i can see you drove some too, i have have a red cat but i was wandering how do you like your hpi cuz later on when i am done with my redcat i want to get another one (wifey sayz its OK, lol)
post those upgrades when done i would like to see them
post those upgrades when done i would like to see them
05-26-2011 | 02:47 PM
#2555
My Feedback: (19)
Joined: May 2011
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
From: palm coast, FL
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
Hi guys these are my first cracks at a good drifter.
Chaise: HPI Sprint 2 Flux
Motor: Brushless
Tires: HPI T-Drift
Rims: HPI ???
Battery: 2s 5000mh lipo
HPI BMW M3 E30
HPI Nissan Skyline R32
Chaise: HPI Sprint 2 Flux
Motor: Brushless
Tires: HPI T-Drift
Rims: HPI ???
Battery: 2s 5000mh lipo
HPI BMW M3 E30
HPI Nissan Skyline R32
I've got three of these bodies i just can't wait to paint! I really dig it in blue ,Great job!
05-27-2011 | 08:32 PM
#2558
Member
My Feedback: (11)
Joined: Feb 2010
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
From: Fairfield,
PA
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
Looks great.I bet that will be a blast
.I am working on a R32 old school myself ,well a TL01 baised anyway.Keep up the good work.
.I am working on a R32 old school myself ,well a TL01 baised anyway.Keep up the good work.
05-28-2011 | 12:27 PM
#2559
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
On the BMW,any certain reason for not putting the LED's in the same headlight housing on each side? If it was unintentional,I'm sorry to point it out,haha.
I got the intercooler ordered yesterday and I was considering what to use for piping.I see a lot of you guys with some very realistic couplers and piping and it looks very good and I was wondering if you guys made that or if it was purchased.I have some aluminum I plan to bend and put a high polish on,and it should work out,but I wanted to ask if anyone could tell me what the outside diameter of the inlet or outlet in thousandths.If you own some calipers and an HPI intercooler,you would rock if you could get me that measurement so I could check my tubing,haha.
I got the intercooler ordered yesterday and I was considering what to use for piping.I see a lot of you guys with some very realistic couplers and piping and it looks very good and I was wondering if you guys made that or if it was purchased.I have some aluminum I plan to bend and put a high polish on,and it should work out,but I wanted to ask if anyone could tell me what the outside diameter of the inlet or outlet in thousandths.If you own some calipers and an HPI intercooler,you would rock if you could get me that measurement so I could check my tubing,haha.
05-28-2011 | 01:00 PM
#2560
My Feedback: (19)
Joined: May 2011
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
From: palm coast, FL
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
ORIGINAL: GALAXY
On the BMW,any certain reason for not putting the LED's in the same headlight housing on each side? If it was unintentional,I'm sorry to point it out,haha.
I got the intercooler ordered yesterday and I was considering what to use for piping.I see a lot of you guys with some very realistic couplers and piping and it looks very good and I was wondering if you guys made that or if it was purchased.I have some aluminum I plan to bend and put a high polish on,and it should work out,but I wanted to ask if anyone could tell me what the outside diameter of the inlet or outlet in thousandths.If you own some calipers and an HPI intercooler,you would rock if you could get me that measurement so I could check my tubing,haha.
On the BMW,any certain reason for not putting the LED's in the same headlight housing on each side? If it was unintentional,I'm sorry to point it out,haha.
I got the intercooler ordered yesterday and I was considering what to use for piping.I see a lot of you guys with some very realistic couplers and piping and it looks very good and I was wondering if you guys made that or if it was purchased.I have some aluminum I plan to bend and put a high polish on,and it should work out,but I wanted to ask if anyone could tell me what the outside diameter of the inlet or outlet in thousandths.If you own some calipers and an HPI intercooler,you would rock if you could get me that measurement so I could check my tubing,haha.
05-29-2011 | 12:11 AM
#2562
Senior Member
Joined: Aug 2009
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
From: birkirkara, MALTA
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
hey dude, the realistic couplings and hoses with the wavy bend and so on are just straws!!! the part where it bends on the top.
05-29-2011 | 01:04 PM
#2564
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
ORIGINAL: icedude1989
hey dude, the realistic couplings and hoses with the wavy bend and so on are just straws!!! the part where it bends on the top.
hey dude, the realistic couplings and hoses with the wavy bend and so on are just straws!!! the part where it bends on the top.
06-05-2011 | 07:33 AM
#2568
Senior Member
Joined: May 2008
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
From: NYC,
NY
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
cool!!! now that you mastered the figure 8, make a layout. A layout will make you drift within intended lines and teach you good control. Love the quality of the video, nice shooting! anyone else around where you live that can drift with you?
06-05-2011 | 11:34 AM
#2569
Junior Member
Joined: Mar 2010
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
From: Holon, ISRAEL
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
ORIGINAL: kstmRYD
anyone else around where you live that can drift with you?
anyone else around where you live that can drift with you?
06-05-2011 | 04:27 PM
#2570
Senior Member
Joined: May 2008
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
From: NYC,
NY
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
Yeah I know the feeling, when I started out there really was no one but then I ran into a couple of guys who were starting out and we kept at it and we grew. We have several clubs and teams now, so hang in there, if you stick with it and spread the word before you know it you will have a couple of people.
06-09-2011 | 06:58 AM
#2571
Senior Member
Joined: Mar 2004
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
From: Ft. Collins,
CO
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
Here's a pic of my drifter. Yok RX7 shell on a Losi XXX-S. Was a shelf queen for over a year but I dug it out and I've been running a pack every night after work.
06-11-2011 | 05:48 AM
#2573
Member
My Feedback: (12)
Joined: Jan 2008
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
From: Festus, MO
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
Sprint2- Literally just installed a Castle SV2 system. Wont know what it'll break til my lunch breakwater work. LOL.
I'm currently trying to find people close to STL, to drift with, but there don't seem to be anyone.
Also, sorry if pic is huge, I'm posting from my phone.
<img src=http://i1204.photobucket.com/albums/bb415/88323se/2010-11-10092140.jpg border=0 alt=>
<img src=http://i1204.photobucket.com/albums/bb415/88323se/2010-11-04090317.jpg border=0 alt=>
I'm currently trying to find people close to STL, to drift with, but there don't seem to be anyone.
Also, sorry if pic is huge, I'm posting from my phone.
<img src=http://i1204.photobucket.com/albums/bb415/88323se/2010-11-10092140.jpg border=0 alt=>
<img src=http://i1204.photobucket.com/albums/bb415/88323se/2010-11-04090317.jpg border=0 alt=>
06-13-2011 | 04:31 AM
#2575
Member
My Feedback: (12)
Joined: Jan 2008
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
From: Festus, MO
RE: POST A PIC OF YOUR DRIFTER THREAD!!!!!!!!!
Negative. 
It didn't drift too bad. It was originally done just playing around to see how much i could get. I ended up with much less.
This is a pic of steering angle after a lil bit of work on the steering blocks.
<img src=http://i1204.photobucket.com/albums/bb415/88323se/2010-11-17084450-1.jpg border=0 alt=>
It didn't drift too bad. It was originally done just playing around to see how much i could get. I ended up with much less.This is a pic of steering angle after a lil bit of work on the steering blocks.
<img src=http://i1204.photobucket.com/albums/bb415/88323se/2010-11-17084450-1.jpg border=0 alt=>
