Kingtech presents the all new T1 sports jet
#1905
I agree, Greg is a great guy who understands how to take care of his customers. I once had a firmware issue with the Electron version of the Xicoy LG15, I think it’s called the GS200, anyway Greg sent me a replacement even before he received the one I was returning, which allowed me to get my T1 back in the air a week sooner. -Tom
#1907
thanks again for the measurements Len and Tip.
Tone
#1908
My Feedback: (4)
Greg is actually who I get my Electron retracts from. He is agreat guy and very knowledgeable. However, I have a set I ordered for a long term project and thinking of repurposing them in the meantime. Hence my question about tire size.
thanks again for the measurements Len and Tip.
Tone
thanks again for the measurements Len and Tip.
Tone
Patrick
#1909
I ordered my T1 about 11 weeks ago. Hoping it will be here soon. I want to order some swb aluminum arms for it. Are 1" arms long enough and what size bolt is required? Will the 3mm thread holes work with the stock linkages?
thank,
Tone
thank,
Tone
#1912
I know I am in the minority here but I used 1 inch arms everywhere but rudder. But what gets everyone is that I bought my arms from amazon. I got 5 arms for $15. Metal and they work great. I'll post a link to them.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Hope this helps. I know someone will come on here and blast me but oh well.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Hope this helps. I know someone will come on here and blast me but oh well.
Last edited by Westwindpilot86; 08-02-2019 at 04:10 PM. Reason: Wrong link
#1918
#1923
Thanks,
Tone
#1924
My Feedback: (6)
In the T1 mechanically... TIGHT spacing .. Tough to get the angles correct (I didn't want to hack away at anything structural) .. On the t1 no issues with Paint or anything like that as the thrust tube extends past the edge of the fuse.. The T3 required some custom engineering to keep the tube extended past the end of FUSE(I have heard some folks had issues with the paint peeling on the tail if they didnt do this).. But i also heard a rumor that there may be a new tube coming out(unconfirmed in any way shape or form)
#1925
In the T1 mechanically... TIGHT spacing .. Tough to get the angles correct (I didn't want to hack away at anything structural) .. On the t1 no issues with Paint or anything like that as the thrust tube extends past the edge of the fuse.. The T3 required some custom engineering to keep the tube extended past the end of FUSE(I have heard some folks had issues with the paint peeling on the tail if they didnt do this).. But i also heard a rumor that there may be a new tube coming out(unconfirmed in any way shape or form)
Thanks,
Tone