** Digitech Central Telemetric Unit for Jeti **
#351
My Feedback: (5)
Hey Folks.
Installing a CTU in my new jet. Using Jeti DS24 and CB200, ect..
I am able to see the CTI from device explorer and I have updated using SD card.
Where do I get the cool dashboard? Is there instructions for install, ect..
Sorry if this has been explained before, but this is a LONG thread.
Thanks,
Wayne
Installing a CTU in my new jet. Using Jeti DS24 and CB200, ect..
I am able to see the CTI from device explorer and I have updated using SD card.
Where do I get the cool dashboard? Is there instructions for install, ect..
Sorry if this has been explained before, but this is a LONG thread.
Thanks,
Wayne
#352
My Feedback: (53)
Hey Folks.
Installing a CTU in my new jet. Using Jeti DS24 and CB200, ect..
I am able to see the CTI from device explorer and I have updated using SD card.
Where do I get the cool dashboard? Is there instructions for install, ect..
Sorry if this has been explained before, but this is a LONG thread.
Thanks,
Wayne
Installing a CTU in my new jet. Using Jeti DS24 and CB200, ect..
I am able to see the CTI from device explorer and I have updated using SD card.
Where do I get the cool dashboard? Is there instructions for install, ect..
Sorry if this has been explained before, but this is a LONG thread.
Thanks,
Wayne
Go into the applications menu and choose ctu-twin...
Then you you see that apps select it make select as desired...colour ect. Then go into sensor /display.....it’s now in the Lua....select that it’s full screen page..
#353
My Feedback: (5)
I think if you have version 5.02 on the TX you already have everything you need....
Go into the applications menu and choose ctu-twin...
Then you you see that apps select it make select as desired...colour ect. Then go into sensor /display.....it’s now in the Lua....select that it’s full screen page..
Go into the applications menu and choose ctu-twin...
Then you you see that apps select it make select as desired...colour ect. Then go into sensor /display.....it’s now in the Lua....select that it’s full screen page..
5.02 of Jeti or 5.02 of CTU??
I put latest CTU on, and there is nothing in the APPS folder for CTU.. :
#355
Thread Starter
My Feedback: (10)
Hey Folks.
Installing a CTU in my new jet. Using Jeti DS24 and CB200, ect..
I am able to see the CTI from device explorer and I have updated using SD card.
Where do I get the cool dashboard? Is there instructions for install, ect..
Sorry if this has been explained before, but this is a LONG thread.
Thanks,
Wayne
Installing a CTU in my new jet. Using Jeti DS24 and CB200, ect..
I am able to see the CTI from device explorer and I have updated using SD card.
Where do I get the cool dashboard? Is there instructions for install, ect..
Sorry if this has been explained before, but this is a LONG thread.
Thanks,
Wayne
you can find all manuals , software , firmware and lua scripts here :
https://www.digitech-aerosports.nl/product/783681/ctu
#359
Join Date: Jun 2006
Location: Gold Coast, Queensland, AUSTRALIA
Posts: 1,469
Received 26 Likes
on
24 Posts
Sandor,
Please can you confirm that the CTU will work with AMT engines and on PowerBox Core. I want to order a CTU, but I need to make sure that it will work for me.
Thank you for your advice.
JanR
Please can you confirm that the CTU will work with AMT engines and on PowerBox Core. I want to order a CTU, but I need to make sure that it will work for me.
Thank you for your advice.
JanR
#367
Senior Member
YAU!
Yet another update.
https://www.digitech-aerosports.nl/product/783681/ctu
we just updated the LUA script
1. changed translation so that each language has its own file (e.g. nl.jsn). Trans.jsn now is just a list of languages. It only reads and loads the one it needs.
2. Replaced kph with kmh everywhere
3. added knots to speed units selection on the menu.
Please be adviced :
Best is first:
1. uninstall CTUautoT from your applications.
2. delete the digitech folder and the CTUautoT.jsn from your TX folder : apps.
3. copy again the latest files back to this folder (apps).
4. reinstall the LUA in applications.
Yet another update.
https://www.digitech-aerosports.nl/product/783681/ctu
we just updated the LUA script
1. changed translation so that each language has its own file (e.g. nl.jsn). Trans.jsn now is just a list of languages. It only reads and loads the one it needs.
2. Replaced kph with kmh everywhere
3. added knots to speed units selection on the menu.
Please be adviced :
Best is first:
1. uninstall CTUautoT from your applications.
2. delete the digitech folder and the CTUautoT.jsn from your TX folder : apps.
3. copy again the latest files back to this folder (apps).
4. reinstall the LUA in applications.
#369
Thread Starter
My Feedback: (10)
open the lua folder in there you find all engine files in json and the audio files
here is a pice of code :
"brand": "Kingtech G2",
"message": {
"255": {
"text": "ECU Offline",
"speech": "ecu_is_off_line.wav",
"de": "ecu_is_off_line-DE.wav",
"active": true
so lets add CZ
"brand": "Kingtech G2",
"message": {
"255": {
"text": "ECU Offline",
"speech": "ecu_is_off_line.wav",
"de": "ecu_is_off_line-DE.wav",
"cz":"testcz.wav",
"active": true
#370
Senior Member
Hi Dan, as we all know, Jeti Duplex are Czech transmitters and accessories for controlling RC models. The Czech language is in the basic equipment of transmitters with other "worldwide languages" English, German, ...... There would be no problem in cooperation with the Czech manufacturer, if there is no one in the CTU team who knows Czech / which I do not even assume /. CTU was developed mainly for the Jeti system. And Jeti is a Czech company. Therefore, I took the liberty of asking /digitech-CTU/ to operate in the Czech language as well. ***winter***
Last edited by winter1; 04-30-2020 at 01:20 PM.
#371
Senior Member
its very easy
open the lua folder in there you find all engine files in json and the audio files
here is a pice of code :
"brand": "Kingtech G2",
"message": {
"255": {
"text": "ECU Offline",
"speech": "ecu_is_off_line.wav",
"de": "ecu_is_off_line-DE.wav",
"active": true
so lets add CZ
"brand": "Kingtech G2",
"message": {
"255": {
"text": "ECU Offline",
"speech": "ecu_is_off_line.wav",
"de": "ecu_is_off_line-DE.wav",
"cz":"testcz.wav",
"active": true
open the lua folder in there you find all engine files in json and the audio files
here is a pice of code :
"brand": "Kingtech G2",
"message": {
"255": {
"text": "ECU Offline",
"speech": "ecu_is_off_line.wav",
"de": "ecu_is_off_line-DE.wav",
"active": true
so lets add CZ
"brand": "Kingtech G2",
"message": {
"255": {
"text": "ECU Offline",
"speech": "ecu_is_off_line.wav",
"de": "ecu_is_off_line-DE.wav",
"cz":"testcz.wav",
"active": true
#372
My Feedback: (53)
Hi Dan, as we all know, Jeti Duplex are Czech transmitters and accessories for controlling RC models. The Czech language is in the basic equipment of transmitters with other "worldwide languages" English, German, ...... There would be no problem in cooperation with the Czech manufacturer, if there is no one in the CTU team who knows Czech / which I do not even assume /. CTU was developed mainly for the Jeti system. And Jeti is a Czech company. Therefore, I took the liberty of asking CTU to operate in the Czech language as well. ***winter***
#374
I'm having issues getting the LUA script to load on the TX. I have updated the transmitter (DS-24). Updated the CTU and can recognize it in device explorer. But, I cannot get the LUA to load. There are two files on the website. I am assuming I need only the LUAOnly and not the full version. How about a step by step of how to upload this file?
Thanks for your help!
Gary
Thanks for your help!
Gary
#375
My Feedback: (14)
Gary,
There is one file (the lua code itself) and one directory (which contains sound clips and other associated data). Both need to be copied for an initial install. After that, if the associated data does not change you can just get a new lua. In my opion, safer to always copy both .. they get copied to the /Apps directory on your transmitter.
If this does not solve the problem, PM me and I am more than happy to get on the phone with you this evening and provide any assistance.
Dave
There is one file (the lua code itself) and one directory (which contains sound clips and other associated data). Both need to be copied for an initial install. After that, if the associated data does not change you can just get a new lua. In my opion, safer to always copy both .. they get copied to the /Apps directory on your transmitter.
If this does not solve the problem, PM me and I am more than happy to get on the phone with you this evening and provide any assistance.
Dave