my friend dave got a kangroo
need to know control surface throws
he has the one piece elevons in it
thanks
vinny

The manual calls for 25 mm for elevator and aileron functions. You need it on the elevator, but I recommend you double or triple rate the aileron for your first flights until you find out what is comfortable. I found 15 mm on the aileron was about right.

You will also need about 1/8 inch reflex on the elevons (up).

Have fun....great jet.

from the FibreClassics manual:

Elevator: +/- 25 mm >
Aileron: +/- 20 mm >all with 20% expo
Rudder: +/- 8-10 mm >

CG 100mm in front of the leading edge of the main spar


*************************
I use as high rate:

Elevator: +/- 18 mm ( but I have working canards)
Aileron: +/- 16 mm
Rudder: +/- 10 mm
all with 27% expo

my low rate is about 75% of high and 23% expo

hobby and crazy guys thanks
just want to make sure
thanks again
vinny

I've got the same on my Graupner Kangaroo.

I used the max I could get on all the surfaces for the Roo-Roo and the Rookie.

ben and koenieboy
thanks alot
i gave all the info
to my friend dave
he and i thank everyone
you guys are great
vinny