|
RE: Redcat Racing Volcano Thread
only thing I can find on the jeep is a 1/6 scale
http://www.smartbargains.com/go.sb?p...ptid=78&isrw=4 |
RE: Redcat Racing Volcano Thread
im tryin to order some parts from redcat but my card gets declined ...i try to call them but just get an answering
machine ...anyone know whats up wit them ??? |
RE: Redcat Racing Volcano Thread
You can order from here as well free shipping with orders over 10.00
http://allaboutfunhobbies.com/store/catalog/index.php or here http://www.clermontmotorsports.com/servlet/StoreFront or here www.rufaster.com If I don't have your site down sorry, post it and I will add it to my list. |
RE: Redcat Racing Volcano Thread
Hey Guys wassup? Anyone know what is the Smallest # of teeth you can get on a Volcano SV clutchbell. The stock one I have is 16 tooth. I want one with Less teeth so I can lower the Gear Ratio without changing to smaller Diameter tires.
|
RE: Redcat Racing Volcano Thread
it did that to me once also i just ordered again and it accepted the order.
|
RE: Redcat Racing Volcano Thread
idk, u can go smaller but i dont think more than maybe a few teeth
|
RE: Redcat Racing Volcano Thread
i put a 15 tooth on mine but i dont think you can go lower since the engine wont sit right, i have to check it out and see.
|
RE: Redcat Racing Volcano Thread
Thanks for all the previous help. I have another newby question for you guys. The Tsunami I mentioned in earlier posts is working and the Volcanoe is functioning after I replaced the chewed up lines. The problem I have now with the Volcanoe SV is when I run it it bogs down and dies if opened up more than half throtte. I have read and re-read a ton of information on tuning. I assume it would bog and die from being to rich rich, but right now I am pushin a temp of about 250 and leaning it out more may do more damage than good. I am sure somehow I should be adjusting the low speed needle more but I am leery as I dont want to go back to not running. Any ideas? Again will run fine half throttel or less, anymore bogs down and dies. Thanks for all the help? Also where do I get info for the bashing contest mentioned?
Thanks! |
RE: Redcat Racing Volcano Thread
Found info on contest.
|
RE: Redcat Racing Volcano Thread
i found when my engine was dieing it was from being to lean
|
RE: Redcat Racing Volcano Thread
ORIGINAL: sks4613 Thanks for all the previous help. I have another newby question for you guys. The Tsunami I mentioned in earlier posts is working and the Volcanoe is functioning after I replaced the chewed up lines. The problem I have now with the Volcanoe SV is when I run it it bogs down and dies if opened up more than half throtte. I have read and re-read a ton of information on tuning. I assume it would bog and die from being to rich rich, but right now I am pushin a temp of about 250 and leaning it out more may do more damage than good. I am sure somehow I should be adjusting the low speed needle more but I am leery as I dont want to go back to not running. Any ideas? Again will run fine half throttel or less, anymore bogs down and dies. Thanks for all the help? Also where do I get info for the bashing contest mentioned? Thanks! richen the high needle a 1/2 turn and see if that helps, your running too lean. |
RE: Redcat Racing Volcano Thread
http://www3.towerhobbies.com/cgi-bin...&I=LXLGB1&P=ML
will this work with the SV? |
RE: Redcat Racing Volcano Thread
yes it will, i have one on one of my redcats
|
RE: Redcat Racing Volcano Thread
[link=http://www.youtube.com/watch?v=bLTr0vms3y8]My new Teaser Video[/link]
|
RE: Redcat Racing Volcano Thread
ORIGINAL: kuppler [link=http://www.youtube.com/watch?v=bLTr0vms3y8]My new Teaser Video[/link] |
RE: Redcat Racing Volcano Thread
Thanks....
|
RE: Redcat Racing Volcano Thread
i got a header coming for my stx.....i saw on here some one had ported theirs..
what do you guys think about this ????does any one have a pic i cant find it now |
RE: Redcat Racing Volcano Thread
redharris did it, pm him
|
RE: Redcat Racing Volcano Thread
You can get the 13t, but you need the other tranny. I am going to order one as soon as he emails me back. I will let you know how it works if you would like.
ORIGINAL: Redharris Hey Guys wassup? Anyone know what is the Smallest # of teeth you can get on a Volcano SV clutchbell. The stock one I have is 16 tooth. I want one with Less teeth so I can lower the Gear Ratio without changing to smaller Diameter tires. |
RE: Redcat Racing Volcano Thread
what site is a good site to order volcano sv parts?
|
RE: Redcat Racing Volcano Thread
|
RE: Redcat Racing Volcano Thread
ORIGINAL: jaybird84 what site is a good site to order volcano sv parts? http://www.redcatracing.com/parts_search.asp http://www.rufaster.com/ http://allaboutfunhobbies.com/store/catalog/index.php or drop me a PM with a list of what you need |
RE: Redcat Racing Volcano Thread
I kind of ran into a fence post and shattered my stock chromeed plastic rim. Does anyone make an aluminum rim that would fit the volcano? If not is there a stronger rim available....or I could just not run into fence posts anymore.
|
RE: Redcat Racing Volcano Thread
this guy sells aluminum rims: http://exactcustoms.com/
here are some inexpensive aluminum rims too: http://cgi.ebay.com/NIB-Full-Set-4-1...QQcmdZViewItem |
RE: Redcat Racing Volcano Thread
i would love to see some ideas on what to set first? high speed needle or low mixture needle? and whats a good start 4 begginers? to just drive and then work down from there!!
|
| All times are GMT -8. The time now is 06:28 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.