Welcome to Club SAITO !
Senior Member
That's a sign of the ages,, woops my age only, I forgot that I had removed the hs. needle. Duh.
Thanks Pete, I handled the crankcase quite a bit installing the bearings, cam housing and the back plate. No paint came off, (yet), maybe I did OK. Nice tat, I have three that serve as targets for the radiation machine, as Joe Pesche says, one is in the nether pawwts.
Thanks Pete, I handled the crankcase quite a bit installing the bearings, cam housing and the back plate. No paint came off, (yet), maybe I did OK. Nice tat, I have three that serve as targets for the radiation machine, as Joe Pesche says, one is in the nether pawwts.
Senior Member
Senior Member
Sullivan's own tool @ $2.79 https://sullivanproducts.com/product/s524/
Last edited by 1200SportsterRider; 06-26-2021 at 03:16 AM. Reason: Add content.
My Feedback: (6)
I got one of the Sullivan tools and this DuBro 3 in 1 driver tool for installing swivel ball links, nylon kwik links and cup style ball links.
Last edited by FlyerInOKC; 06-26-2021 at 09:32 AM.
Senior Member
I finished up Mike's high compression 65 GK, it's early enough that 65 valve springs will not fit, it still takes the 50 sized springs. I equipped it with stainless screws, I reasoned out that the stock alloy screws do not corrode, copper gaskets do not corrode, steel bearings do not corrode so Stainless Steel screws won't. Fitzpatrick 61's came with stainless steel screws, they did not corrode. The camera light made certain spots look as if they need touched however that is an optical allusion. It's even wearing a black Taipan glow plug.
Last edited by 1200SportsterRider; 06-26-2021 at 09:46 AM. Reason: Add content.
My Feedback: (6)
My Feedback: (1)
Mike, if I bought that tool I would set it down and never find it again LOL
my God, the humidity is so high here I can only work on my planes for 20 minutes and I have to get away. Vermont has never been like this
Jim
My Feedback: (6)
I don't have that problem, I set up a card table in the den and build in the air conditioning. If I built on my workbench in the garage I would be working on the same airplane for 30 years and it still wouldn't be finished. I just store projects out there. This wing was progressing nicely until I had an accident with it in the garage now I have to rebuild it.
Last edited by FlyerInOKC; 06-26-2021 at 07:59 PM.