chit chat thread
#226
Member
Joined: Aug 2011
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
From: FNQ, AUSTRALIA
Aaawwwww Maaaaan
I just got pinned with 2 points in RCG from September 15th way back on page 105.
Didn't even get a chance to edit them to make the points go away immediately and now I can't post.
The rules state that a ban is only enforced when you reach 10 points but I only have 5 and yet I can't post, not even in the Moderation Appeal section as I was going to have a go at pinning me for something from almost 2 months ago totally unrelated to our previous issue's and not giving me a chance to fix it before issuing the points.
Sent off a PM regarding the whole banned after 5 points when rules state 10 so we'll see what happens there.
I just got pinned with 2 points in RCG from September 15th way back on page 105.
Didn't even get a chance to edit them to make the points go away immediately and now I can't post.
The rules state that a ban is only enforced when you reach 10 points but I only have 5 and yet I can't post, not even in the Moderation Appeal section as I was going to have a go at pinning me for something from almost 2 months ago totally unrelated to our previous issue's and not giving me a chance to fix it before issuing the points.
Sent off a PM regarding the whole banned after 5 points when rules state 10 so we'll see what happens there.
#227
Thread Starter
Senior Member
Joined: Jan 2009
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
From: hellvan demons land, AUSTRALIA
yeah good luck with mate. You know all the troubles I had. I can post in other threads but just not mine at the moment.
MEH im over it. Hopefully in 12 days i will be able to post again.
You guys need to tone it down or you will all get banned and this is not much good.
Ive been looking into the mcpx brushless mods for the last hour or so. Its bloody expensive and not quite sure its worth it for me yet. Im still undecided. Its going to cost me the best part of $200 at least. Hmm maybe the brushless power might cause me to crash more.
I think ill have to sleep on it for a while.
MEH im over it. Hopefully in 12 days i will be able to post again.
You guys need to tone it down or you will all get banned and this is not much good.
Ive been looking into the mcpx brushless mods for the last hour or so. Its bloody expensive and not quite sure its worth it for me yet. Im still undecided. Its going to cost me the best part of $200 at least. Hmm maybe the brushless power might cause me to crash more.
I think ill have to sleep on it for a while.
#229
200 bucks on upgrading an mCPx ??
Ur kidding me.
You may as well fork out an extra hundred or so and go a Copter-X 450.
Ok - so it's not an 'indoor' bird, but Jeez. AU$200 for an upgrade? On a micro-Bird ?
Hmm... I'd be thinking about that one...
BJ
Ur kidding me.
You may as well fork out an extra hundred or so and go a Copter-X 450.
Ok - so it's not an 'indoor' bird, but Jeez. AU$200 for an upgrade? On a micro-Bird ?

Hmm... I'd be thinking about that one...
BJ
#230
Thread Starter
Senior Member
Joined: Jan 2009
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
From: hellvan demons land, AUSTRALIA
yeah like I said I would sleep on it and I have and I dont think its worth it.
Yeah I know BJ ive owned a blade sr CP heli before and didnt have much luck with it. The mcpx is very simple to fly.
I just wish mine had a little more head speed. Theres slop in the head as well. I dont think I have it set up right but to be honest I dont really know what im doing.
I cant run anymore then 60% pitch on mine otherwise it bogs down big time. Oh well. I have fun flying circuits down the park.
Maybe a new swash and head might help it.
Im pretty keen to get my rarebear flying but the idiots at my LHS have taken almost 2 months now just to get me some apc props. I have some coming in my next HK order so I will just wait till then.
BTW BJ I had a 35-30 1700kv motor here and I slapped it on the hyperion snyper. I used that amp meter thing ive got and tested out some props on it. With a 10x5 it was pulling 41amps. 8x6 was 33amps. 8x4 was 29amps. I have a 30amp esc on it as well but the 8x4 was giving the bird enough thrust.
I have a park 480 motor to go on it but i stuffed the shaft and ordered another one but the idiots at the LHS havent got it for me yet.
Im gonna ring em right now the stupid clowns.
Yeah I know BJ ive owned a blade sr CP heli before and didnt have much luck with it. The mcpx is very simple to fly.
I just wish mine had a little more head speed. Theres slop in the head as well. I dont think I have it set up right but to be honest I dont really know what im doing.
I cant run anymore then 60% pitch on mine otherwise it bogs down big time. Oh well. I have fun flying circuits down the park.
Maybe a new swash and head might help it.
Im pretty keen to get my rarebear flying but the idiots at my LHS have taken almost 2 months now just to get me some apc props. I have some coming in my next HK order so I will just wait till then.
BTW BJ I had a 35-30 1700kv motor here and I slapped it on the hyperion snyper. I used that amp meter thing ive got and tested out some props on it. With a 10x5 it was pulling 41amps. 8x6 was 33amps. 8x4 was 29amps. I have a 30amp esc on it as well but the 8x4 was giving the bird enough thrust.
I have a park 480 motor to go on it but i stuffed the shaft and ordered another one but the idiots at the LHS havent got it for me yet.
Im gonna ring em right now the stupid clowns.
#231
Thread Starter
Senior Member
Joined: Jan 2009
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
From: hellvan demons land, AUSTRALIA
well it looks like the clowns have some 5x5 and a 6x5.5 prop down there but they couldnt get my shaft. Shame I have no money at the moment.
I went down stairs and was messing around with my mcpx and this little kid was walking past and I lost concentration and bingo into the cement. Busted off blades grips. Lucky these are still the original blade grips on it. I put the new blade grips on it, the ones HH sent everyone and it seems to take some of the slop out of the head.
Its a bit gusty here now so I might wait till my mate comes up and go over to the park and see how she flies now.
I think I lost of bit of power by cutting off the lipo cable with an ultra micro one then I went and put the original one back on and just bent the pins in a bit.
I dont think my mcpx has exact ZERO pitch but its pretty bloody close.
I hate to say it BJ but those other W crowd already have a brushless micro with 6 axsis gyro but i just cant do it captain!!!
I went down stairs and was messing around with my mcpx and this little kid was walking past and I lost concentration and bingo into the cement. Busted off blades grips. Lucky these are still the original blade grips on it. I put the new blade grips on it, the ones HH sent everyone and it seems to take some of the slop out of the head.
Its a bit gusty here now so I might wait till my mate comes up and go over to the park and see how she flies now.
I think I lost of bit of power by cutting off the lipo cable with an ultra micro one then I went and put the original one back on and just bent the pins in a bit.
I dont think my mcpx has exact ZERO pitch but its pretty bloody close.
I hate to say it BJ but those other W crowd already have a brushless micro with 6 axsis gyro but i just cant do it captain!!!
#232
Member
Joined: Aug 2011
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
From: FNQ, AUSTRALIA
ORIGINAL: stalyoni
I hate to say it BJ but those other W crowd already have a brushless micro with 6 axsis gyro but i just cant do it captain!!!
I hate to say it BJ but those other W crowd already have a brushless micro with 6 axsis gyro but i just cant do it captain!!!
It seems my account is similar to yours now Stal, I can post just about everywhere except in your thread

#233
Thread Starter
Senior Member
Joined: Jan 2009
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
From: hellvan demons land, AUSTRALIA
Lets just make another thread and pm everyone the links
Bj can you make this happen then you will be top dog.
That way we leave all the idiots behind and I don't mean bud
Bj can you make this happen then you will be top dog.
That way we leave all the idiots behind and I don't mean bud
#234
Member
Joined: Aug 2011
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
From: FNQ, AUSTRALIA
I agree bout starting a new thread Stal but it still won't stop the idiots as they can and DO simply go into our profiles and click on "Find all posts by Meebo" and it does exactly that.
So we still won't get away from them. Really the ONLY way to do it to create new user names which won't happen.
So we still won't get away from them. Really the ONLY way to do it to create new user names which won't happen.
#235
Thread Starter
Senior Member
Joined: Jan 2009
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
From: hellvan demons land, AUSTRALIA
http://www.ebaumsworld.com/video/watch/81981193/
i know im not a jet guy but this is just awesome
come BJ start a new thread and we can start a clean slate, then you will be the king of the castle and ill be the dirty rascel?
i know im not a jet guy but this is just awesome
come BJ start a new thread and we can start a clean slate, then you will be the king of the castle and ill be the dirty rascel?
#236
I can start a new thread, Stal - no probs.
But, like Meemblz said, it won't stop the stalkers.
All they have to do is click on your name, go to your profile, then click on "show all posts by Blah" and they're tracking you again.
There's no such thing as "private" threads on RCG, afaik...
BJ
But, like Meemblz said, it won't stop the stalkers.
All they have to do is click on your name, go to your profile, then click on "show all posts by Blah" and they're tracking you again.
There's no such thing as "private" threads on RCG, afaik...
BJ
#238
Member
Joined: Aug 2011
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
From: FNQ, AUSTRALIA
I'm thinkin I might start a new user name and start fresh, I'm sick of getting points for such stupid things, we are clearly being targeted.
Just wipe the slate clean I think.
Just wipe the slate clean I think.
#239
That'd only work if we all did it at the same time, Meebz.
Scum-nutz follows everyone around to see which threads they're posting on.
I know for a fact he's been into my profile to track me.
He'd only have to recognise one name in a new names/new thread - then he'd have a list of all the 'new posters' and you're back to square one.
And you know he reads this one here on RCU too, yah?
That low-life has nothing better to do than get in everyone elses face. He thrives on causing trouble. He's vicious and vindictive, and will do whatever it takes to keep getting people docked points over there.
Don't feed him.
BJ
Scum-nutz follows everyone around to see which threads they're posting on.
I know for a fact he's been into my profile to track me.
He'd only have to recognise one name in a new names/new thread - then he'd have a list of all the 'new posters' and you're back to square one.
And you know he reads this one here on RCU too, yah?
That low-life has nothing better to do than get in everyone elses face. He thrives on causing trouble. He's vicious and vindictive, and will do whatever it takes to keep getting people docked points over there.
Don't feed him.
BJ
#240
Member
Joined: Aug 2011
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
From: FNQ, AUSTRALIA
Yeah I thought the fag had given up till now but I suppose that little quiet period was because he was offline. Had no activity for a couple of weeks then sure enough he returns and so does the points.
What I don't get is why the mods don't pull him up for obnoxious reporting. What's the bet he uses a couple of user names to get away with it or he knows the mod.
What I don't get is why the mods don't pull him up for obnoxious reporting. What's the bet he uses a couple of user names to get away with it or he knows the mod.
#242
Thread Starter
Senior Member
Joined: Jan 2009
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
From: hellvan demons land, AUSTRALIA
Meebo what ever you do don't start another user name. You can get done for that as well. You can actually get a permenant ban for this.
Just start a new thread and be done with it.
Just start a new thread and be done with it.
#248
Thread Starter
Senior Member
Joined: Jan 2009
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
From: hellvan demons land, AUSTRALIA
I can contact him through hobby king. But I think we need to work out a better way we can say what we want when we want.
by the way bud wont be happy as I think my micro slick is at the post office
by the way bud wont be happy as I think my micro slick is at the post office
#249
The only way you can do that, Stal, is if there's a chat site that has 'private rooms' - where the "mod" can decide who comes in and who doesn't.
Used to have them in the old BBS and ICU days (or whatever - that long ago, I don't remember which now)...
BJ
Used to have them in the old BBS and ICU days (or whatever - that long ago, I don't remember which now)...
BJ




