The Official Traxxas Slash short-course race truck
#2602
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
I agree, there was a lot of good stuff here!
My neighbor has an E-Revo & I always envied his 4 wd ability to get out of "trouble" but since I've only had the 2WD Slash a year I felt I couldn't really afford to buy another truck. I happened to find a 4wd roller on e-bay for a nice price. I compare the 2 parts list & realized a whole bunch of the 2wd stuff is the same as the 4wd drive. So I bought it & transferred all the parts I could. Long story short on the 1st pack I smoked the brushed motor! But it sure handled nice!
I'm working on a BL conversion & still way cheaper than the full package! Plus I got a few spare parts now.
These things are great fun!
Chuck
My neighbor has an E-Revo & I always envied his 4 wd ability to get out of "trouble" but since I've only had the 2WD Slash a year I felt I couldn't really afford to buy another truck. I happened to find a 4wd roller on e-bay for a nice price. I compare the 2 parts list & realized a whole bunch of the 2wd stuff is the same as the 4wd drive. So I bought it & transferred all the parts I could. Long story short on the 1st pack I smoked the brushed motor! But it sure handled nice!
I'm working on a BL conversion & still way cheaper than the full package! Plus I got a few spare parts now.
These things are great fun!
Chuck
#2603
RE: The Official Traxxas Slash short-course race truck
ha nice work, ive kind of dont that before, ive made a few cars from the basic chassis, peice by peice week by week. I just dident have the outlay to buy it as a kit.
yeah those stock motors!!!! i had no luck 2 smoked
Hows if u are going brushless look at the ezrun 35a ESC & motors. Ive seen people use the 70amp & 100amp esc, but whats the point???
seriously im running a 35a with a 3900kv motor, on 7.4v its to fast & powerfull & on 11.1v its just crazy & pulls wheelies. if im getting over the top preformance from a 35a ESC why go any higher??? ive got 3 35a brushless ESC's and thay power 8 of my 12 cars with varing KV motors ranging from 2400kv-4900kv.
all ive been doing is slowly buying the motors then the ESC's I dont have the cash to buy it as a kit but individually i can just squees it.
I only plan to run a higher amp ESC in my rustler so i can run 4s-5s lipos for burnouts
hey i am supprised with the slash winning the r/c actions truck of the year again, that the forums are nearly dead
yeah those stock motors!!!! i had no luck 2 smoked
Hows if u are going brushless look at the ezrun 35a ESC & motors. Ive seen people use the 70amp & 100amp esc, but whats the point???
seriously im running a 35a with a 3900kv motor, on 7.4v its to fast & powerfull & on 11.1v its just crazy & pulls wheelies. if im getting over the top preformance from a 35a ESC why go any higher??? ive got 3 35a brushless ESC's and thay power 8 of my 12 cars with varing KV motors ranging from 2400kv-4900kv.
all ive been doing is slowly buying the motors then the ESC's I dont have the cash to buy it as a kit but individually i can just squees it.
I only plan to run a higher amp ESC in my rustler so i can run 4s-5s lipos for burnouts
hey i am supprised with the slash winning the r/c actions truck of the year again, that the forums are nearly dead
#2605
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
Try [link=http://www.philshobbyshop.com/catalog/viewsku?sku=TRA5802&itemname=slash_2wd_rtr_xl-5_w_2-channel_am_radio]here.[/link] Though I'd recommend spending the extra money & get the 2.4GHz radio [link=http://www.philshobbyshop.com/catalog/viewsku?sku=TRA5803&itemname=slash_rtr_w_2_4_radio_7-cell_nimh_battery_char]here.[/link]
Chuck
Chuck
#2606
Senior Member
My Feedback: (4)
Join Date: Feb 2008
Location: Norwich,
NY
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: imp3r10
where can you buy this vehicle for the low price of $200 ish?
where can you buy this vehicle for the low price of $200 ish?
cheapest i've seen new RTR is here http://www.activepowersports.com/pro...d-TRA5802.html
but thats with the AM radio system. You're better off spending the extra $20-$30 or so and finding one with the 2.4 ghz radio. like this
http://www.stormerhobbies.com/cgi-bi...pl?pn=TRX58036
#2607
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
ph - turns out my neighbor is upgrading his E-Revo & sold me his setup = HobbyWing 65A ESC & 4000KV BL motor. I was looking at a bit smaller motor ~3000KV but maybe wheelies are in my future! LOL I'll let you know how it turns out.
Chuck
Chuck
#2608
Senior Member
My Feedback: (1)
Join Date: Jun 2009
Location: Great Falls,
MT
Posts: 2,482
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
if the motor was running a revo than it will run the slash 4x4 no sweat. Gearing can make a wheelie problem subside, but the best thing is just plain old self control
#2609
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: golfandcards
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
#2610
Senior Member
Join Date: Feb 2011
Location: charleston,
MO
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
Traxxas is the best and will always be the best R/C car/truck maker , one thing that would get traxxas even more popular is if they start creating li-po batteries , there nihm packs only go up to 4200mah , but they are damn good durable batteries and they have good run time . When i meant by Traxxas is the best and will always be the best R/C car/truck maker . [ THAT IS NO FRIGGIN JOKE ]
#2611
Senior Member
Join Date: Feb 2011
Location: charleston,
MO
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
quote:
ORIGINAL: golfandcards
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
ORIGINAL: golfandcards
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
JUST GET NEW PINION GEAR LIKE THE 19T PINION GEAR WHICH IS THE BEST FOR THAT MODEL.
#2612
Senior Member
Join Date: Feb 2011
Location: charleston,
MO
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Official Traxxas Slash short-course race truck
and if you just keep on killing many pinon and spur gears , then heres a auggestion , buy an aluminum one , not that crapy plastic crap.
#2613
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: clp.eng
ph - turns out my neighbor is upgrading his E-Revo & sold me his setup = HobbyWing 65A ESC & 4000KV BL motor. I was looking at a bit smaller motor ~3000KV but maybe wheelies are in my future! LOL I'll let you know how it turns out.
Chuck
ph - turns out my neighbor is upgrading his E-Revo & sold me his setup = HobbyWing 65A ESC & 4000KV BL motor. I was looking at a bit smaller motor ~3000KV but maybe wheelies are in my future! LOL I'll let you know how it turns out.
Chuck
That has a burst current of 380a should be killer with the 4x4
Mine is only 190a burst on 11.1v it pulls wheelies but mine is a 2x4
#2614
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: lithiumx152
and if you just keep on killing many pinon and spur gears , then heres a auggestion , buy an aluminum one , not that crapy plastic crap.
and if you just keep on killing many pinon and spur gears , then heres a auggestion , buy an aluminum one , not that crapy plastic crap.
#2615
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: Andyjk
I had the same problem with my Slash. I ended up going through 17 spur gears. I tried everythingincluding buying a brand new transmissionand nothing worked. It got to the point where I just didnt bother driving it anymore. What I did was use Jato gears. They are a bigger pitch so they don't slip and I haven't been through one yet. I'd suggest doing the same. The only thing is you wont be able to put the cover back on over the slipper clutch because the spur is bigger.
ORIGINAL: golfandcards
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
#2616
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: phmaximus
what setup were u running???
ORIGINAL: Andyjk
I had the same problem with my Slash. I ended up going through 17 spur gears. I tried everythingincluding buying a brand new transmissionand nothing worked. It got to the point where I just didnt bother driving it anymore. What I did was use Jato gears. They are a bigger pitch so they don't slip and I haven't been through one yet. I'd suggest doing the same. The only thing is you wont be able to put the cover back on over the slipper clutch because the spur is bigger.
ORIGINAL: golfandcards
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
hey guys sorry this is my first post on this thread. I am having a pinion/spur gear problem with my Slash. I know this is not enough information but the spur gear and pinion keep eating themselves up! They look like worn out Chinese stars after a day of running. I have tried every distance in a mesh. Very loose, very tight and all the spots in the middle. I use a 14 tooth pinion and the stock spur gear. i Have tried Steel Spur gears and it wears just as fast. I have tried to put washers on the motor mount to make sure the mount is as even as possible. I am going to try and post up some pictures here very soon. Any ideas?
This has probably happen over 20 times =( I am starting to wondering if something in my setup is defective or something.
#2617
RE: The Official Traxxas Slash short-course race truck
hummmmm. Just wondering when the spur gear striped was it dirty or did it still look new & clean??? & How did u set the gear mesh?? & do u replace the spur & pinion together?
#2618
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: phmaximus
hummmmm. Just wondering when the spur gear striped was it dirty or did it still look new & clean??? & How did u set the gear mesh?? & do u replace the spur & pinion together?
hummmmm. Just wondering when the spur gear striped was it dirty or did it still look new & clean??? & How did u set the gear mesh?? & do u replace the spur & pinion together?
#2620
RE: The Official Traxxas Slash short-course race truck
ha love the police Lancer in ur pic, is that yourse????
How on earth was the checkerpatch striping done. ive allways wanted to make a aussie police car but yeah those checker look like a pain
How on earth was the checkerpatch striping done. ive allways wanted to make a aussie police car but yeah those checker look like a pain
#2621
RE: The Official Traxxas Slash short-course race truck
ORIGINAL: phmaximus
ha love the police Lancer in ur pic, is that yourse????
How on earth was the checkerpatch striping done. ive allways wanted to make a aussie police car but yeah those checker look like a pain
ha love the police Lancer in ur pic, is that yourse????
How on earth was the checkerpatch striping done. ive allways wanted to make a aussie police car but yeah those checker look like a pain
#2622
RE: The Official Traxxas Slash short-course race truck
he he he that is so cool, This is my drifter, it would be cool to make a vid with something like this been chased by it. lol
#2623
RE: The Official Traxxas Slash short-course race truck
Hows post man droped of my First order YAY!!!! 3 to go.... Man I Love Tax Time
Ive now got fitted
Traxxas Link 2.4ghz reciver (base model 2ch 2.4ghz TX)
Yeah Racing 35a ESC
Yeah Racing 3900kv Motor
Home Made Lexen ESC Mount
Proline Chassis Saver
NEW
RPM Front Bearing Carriers
RPM Caster Blocks
RPM Rear Bumper Mount
RPM Rear Arms
RPM Front Arms
RPM Light Canister Set
Ive now got fitted
Traxxas Link 2.4ghz reciver (base model 2ch 2.4ghz TX)
Yeah Racing 35a ESC
Yeah Racing 3900kv Motor
Home Made Lexen ESC Mount
Proline Chassis Saver
NEW
RPM Front Bearing Carriers
RPM Caster Blocks
RPM Rear Bumper Mount
RPM Rear Arms
RPM Front Arms
RPM Light Canister Set
#2625
RE: The Official Traxxas Slash short-course race truck
cheerz bud
nar it seems fine ive got 3 other 1/10 scale cars running the same setup all are sweet, ive soldered the ESC fan onto the the built in BEC, so its not a hassle when changine from 2s to 3s lipos, the fan runs slightly slower & the ESC only gets warm, the 390core 540 size moter has plenty of grunt, it gets a little hot, but it passes a 6sec touch test.
its strange those 35a kits are great, i dont see the need for anything higher unless u are playing with high kv motors on 3s or plan 4s lipo's
i think im a 35a fan lol
nar it seems fine ive got 3 other 1/10 scale cars running the same setup all are sweet, ive soldered the ESC fan onto the the built in BEC, so its not a hassle when changine from 2s to 3s lipos, the fan runs slightly slower & the ESC only gets warm, the 390core 540 size moter has plenty of grunt, it gets a little hot, but it passes a 6sec touch test.
its strange those 35a kits are great, i dont see the need for anything higher unless u are playing with high kv motors on 3s or plan 4s lipo's
i think im a 35a fan lol