THis is my preferred pattern plane: Bridi Advance Trainer - OS FS70 SUrpass II - build from RCM plans, with some minor mods - S3001 everywhere, S3110 at the throtle.
Unfortunately lost at 3rd flight (extreme ail trim at take-off, my mistake)

What? Quique or Jason could fly P09 and F09 with it, and will beat the pants out of any of us. Am I wrong?

[img][/img]


Cheers,

hi guys,
my old hydeaway,was sold on several years ago,what a great model.

regards
steve underwood.

This is my Patriot 3D alongside Jim Thompson's Shinden. No, your eyes aren't playing tricks on you.

Here is my Pass Port. Very bad picture of me because I was home from a contest and tired. Anyway here is my beloved flying machine.

This picture will be updated because when I took this picture I didn't have my tip fins on.



Matthew L.

Guys, this is my own design "counter measure". Flies at 12 lbs on a DL-50 gas engine. Has currently about 50 flights so far. not exactly legal but a good practice machine.

Tabish

SPAD Insight
58" Span
OS .46FX
5.5lbs

Hey looky there another Insight. I am happy to see this because I was worrying they would go extinct. lol

Here's some of my old pattern planes from the Sixtys and Seventys. The Red-White and Blue "Sweet Tater" with Rhom-Air retracts and

a Veco .61 With Perry Pump and Carb was built in 1976 to celebrate the Kansas Centennial. The Fuselage hanging on the wall is a

"Beach Comber". The other planes are a White/red "Sweet Tater" and a "Super Kaos."

Jim

Hey Jim; when I was a kid I dìreamed with those planes... I saw them many times on spanish and US magazines. In those times there were no youtube to see videos of the pattern maneuvers they made; can you show any? Can you post a flight sequence you made with thme?
Cheers
Guille

Eddie,

As I recall, the tweedy burd was my first wholy owned pattern model way back in 1978. I was flying it just fine at the open field we had in College; but when I arrived at a new field where I wanted to become a member, the local so called "expert" just had to try it out to make sure it was airworthy. What's a 23 year old new kid on the block to do. He proceeded to crash it. I vowed to myself that that was never going to happen again and it hasn't

MattK

After 1 year and 8 months of slleping at least I maiden the accipiter... flyies like a dream!!!!!

Video of maiden take off: http://www.youtube.com/watch?v=BwClEQgyUS8

Beware all you big pilots; Sofia is training for beat you all too!!!
Cheers!!!

x tech achillies, powered by os55ax, synergy clone, flies superb

Hey GUYS....
anyone here KNOW what a Calypso looks like or HAVE ONE?
I have one but sure would like to see some others that one
or have pics of one.
thanks Guys
Ron

WHat does a Calypso look like?

Rusty

Happy Thanksgiving!

Rusty Dose
Team Futaba
Team YS parts and Service

Does anyone else think pattern planes look like little people? [&:]

Focus III Rusty?

Just maiden my BEAM 2m plane ..............

Looks Like a new Focus to me,..pretty cool!




Bill Holsten
Fliton Team Pilot

Me & my Twister at this years GBRCAA Championships.

YS160DZ for power, Hattori short pipe with Nishioka (29mm) pipe mount, JR radio throughout...............what else

Hi Andy
Thats a Winner [8D]
do you have a pic from the side

Hi Torben & thanks for the comment!

Yep here you go, the chequer shown here is Profilm Carbon effect.

and a few more, enjoy!

The pipe mount shown here has now been changed to the Nishioka system.

This was also my first attempt at painting a model fuse. My 'B' machine is now ready to get on the bench which is another Twister. Same spec as the 'A' machine using the same sheme design but using different colours. I plan to cover the build on here so stay tuned you Twister fans.

Andy,

Your plane looks extremely great, I am jealous!!

Where did you get the profilm carbon effect from?

Thanks,
Nikos

Hi Nikos

Thanks for the compliment

Profilm is the name given to Oracover over here in the UK which is distributed by J Perkins and is available from most model stores, this store http://www.aeolus-rc.com/shopGR/index.htm shows stock of Oracover so should be able to help you!

Καλά Χ�ιστο�γεννα

Andy.