|
RE: Showtime
Advent,
Thanks for this great tip! What is the make and model of your incidence meter? Thanks! Magoo |
RE: Showtime
My take on the dead spot at low speed is not from the sfg but from the barn door Aileron which when defelected at low speed take away or mess the air flow over the elevator.
I fly mine with a moki 1.35 and go verticle on take off and don't get in that position. Then when landing I turn while losing altitude at the same time to keep speed up that way there is air flow over the tail. PLus don't deflect Ailerons alot at low speeds. Hope this will help Rich |
RE: Showtime
Ok...i've read through.....
someone bottom line it... Looking for an IMAC/pattern practice plane that I can have fun with.... I already have a Profile Katana for serious silly 3D Showtime with Saito 100 ok for this?? I know it won't be a rocket, but would it be fun.... I already own the Saito 100 so there is NO OTHER option for the motor... if the motor doesn't work, I get another plane..... Thanks Exeter |
RE: Showtime
Exeter - a few pages back someone flew theirs on the SA100 ... he was not a happy bunny for sure! But again, thrust/performance is a relative thing. Another plane? Try the Fliton Extra 330 then. :)
|
RE: Showtime
that is the other one I'm looking at.....
the hobby shop has one on order for me (I don't have to buy it though...) |
RE: Showtime
I currently fly my ST with a Saito 100. It is a great flier with this combo.....if you plan on flying IMAC routines with it...it's perfect....if you want the punchout power for hovers...it's not there. I fly a little of both, and I enjoy it. If you poing the nose up, it will climb quite a while before giving into gravity, but mine came in a little beefy also. Not sure why, possible a early production plane. I'm not a hovering freak, but like to do the occasional blender, harrier, etc etc etc mixed in with 4 points and all the basic aerobatic manuvers. Get it, with the Saito 1.00, it is a great flying plane.
Neo |
RE: Showtime
ITS SO FRUSTRATING!!! I'VE BEEN OUT 3 TIMES W/ST, HAVE ABOUT 20 FLIGHTS, AND STILL ONLY 2 FLIGHTS WITH POWER ON LANDING.(MOKI 135) I CAN AT LEAST SAY THE ST PENETRATES ON DEADSTICK SIMILIAR TO A PATTERN PLANE, BUT NOT AS MUCH SPEED. ITS FRUSTRATING BECAUSE I HAD IT RUNNING LONG ENOUGH(& HIGH ENOUGH) TO FIND OUT IT HARRIERS WELL, NOT MUCH AILERON NEEDED,HOVERS WELL(ADDED MORE RIGHT THRUST) AND TRACKS BEAUTIFUL POINT ROLLS,FLAT SPINS ARE FLAT.
LOOKS LIKE A COMPLETE 3-D(I HAVENT FIGURED OUT WHAT 4-D IS YET)MACHINE, BETTER THAN THE EF YAK. I JUST NEED TO GET THE MOKI STRAIGHT TO BUILD CONFIDENCE. I STILL HAVE NOT EXPERIENCED THAT PROBLEM SINKING ON TAKE OFF, I USED TO LIKE DOING POINT ROLLS ON TAKE OFF WITH OTHER PLANES BUT AFTER READING THIS PAGE I WILL HOLD OFF ON THAT UNTIL I KNOW MORE ABOUT THAT PROBLEM. IVE DONE 4 POINTS HIGH WITH IT, DIDNT NOTICE ANYTHING THERE, MY SPEED WAS PRETTY HIGH COMPARED TO TAKE OFF THOUGH. I DID NOTICE A CHANGE IN FLIGHT CHARACTERISTICS AFTER INCREASING PITCH OF THE PROP, I WENT FROM A 17X5 ZINGER TO 17X6 TOPFLITE, THE ST WAS FLYING WITH A NOSE UP ATTITUDE BEFORE THAT. LIKE IT WAS TAIL HEAVY BUT IT IS ON STOCK CG. THAT WAS A LITTLE ODD, NEVER HAD A PLANE DO THAT. |
RE: Showtime
WHAT......:D Sorry I had to do it
|
RE: Showtime
ORIGINAL: MIXMASTER ITS SO FRUSTRATING!!! I'VE BEEN OUT 3 TIMES W/ST, HAVE ABOUT 20 FLIGHTS, AND STILL ONLY 2 FLIGHTS WITH POWER ON LANDING.(MOKI 135) I CAN AT LEAST SAY THE ST PENETRATES ON DEADSTICK SIMILIAR TO A PATTERN PLANE, BUT NOT AS MUCH SPEED. ITS FRUSTRATING BECAUSE I HAD IT RUNNING LONG ENOUGH(& HIGH ENOUGH) TO FIND OUT IT HARRIERS WELL, NOT MUCH AILERON NEEDED,HOVERS WELL(ADDED MORE RIGHT THRUST) AND TRACKS BEAUTIFUL POINT ROLLS,FLAT SPINS ARE FLAT. LOOKS LIKE A COMPLETE 3-D(I HAVENT FIGURED OUT WHAT 4-D IS YET)MACHINE, BETTER THAN THE EF YAK. I JUST NEED TO GET THE MOKI STRAIGHT TO BUILD CONFIDENCE. I STILL HAVE NOT EXPERIENCED THAT PROBLEM SINKING ON TAKE OFF, I USED TO LIKE DOING POINT ROLLS ON TAKE OFF WITH OTHER PLANES BUT AFTER READING THIS PAGE I WILL HOLD OFF ON THAT UNTIL I KNOW MORE ABOUT THAT PROBLEM. IVE DONE 4 POINTS HIGH WITH IT, DIDNT NOTICE ANYTHING THERE, MY SPEED WAS PRETTY HIGH COMPARED TO TAKE OFF THOUGH. I DID NOTICE A CHANGE IN FLIGHT CHARACTERISTICS AFTER INCREASING PITCH OF THE PROP, I WENT FROM A 17X5 ZINGER TO 17X6 TOPFLITE, THE ST WAS FLYING WITH A NOSE UP ATTITUDE BEFORE THAT. LIKE IT WAS TAIL HEAVY BUT IT IS ON STOCK CG. THAT WAS A LITTLE ODD, NEVER HAD A PLANE DO THAT. |
RE: Showtime
I use a laser meter from Great Plains I think...
ORIGINAL: LarryMagoo Advent, Thanks for this great tip! What is the make and model of your incidence meter? Thanks! Magoo |
RE: Showtime
If you jump over to the Pattern forum there is a thread on the showtime
for pattern flying with some setup tips from some very knowledgeable pattern fliers. ORIGINAL: exeter_acres someone bottom line it... Looking for an IMAC/pattern practice plane that I can have fun with.... I already have a Profile Katana for serious silly 3D |
RE: Showtime
Saw this SHOWTIME the other day at our local club.
Juding from what I saw... I can easily say that the engine to go with is the SuperTigre 2300 Man that engine gave this plane some power |
RE: Showtime
Advent,
If you jump over to the Pattern forum there is a thread on the showtime for pattern flying with some setup tips from some very knowledgeable pattern fliers. DO YOU HAVE THE LINK FOR THAT? It's not that I'm too lazy to look for it.......okay.. ..maybe I am.... Thanks, Magoo |
RE: Showtime
|
RE: Showtime
Does anyone know the diameter of the Showtime wingtube? I have one on order, but I want to get an carbon fiber tube. I can get metric or inch tubes, so if it doesn't measure evenly on one scale, please try the other.
Thanks. Jon Lowe |
RE: Showtime
:)It's either 1" or 1 1/16" The way I measure mine it's 1 1/16".
Thanks Barry |
RE: Showtime
Jon,
Let me know if you find a carbon fiber wingtube. I can't seem to find one that is the correct size. It would need to be 1 and 1/16" or 26.9?mm (so call it 27 mm). As good as this plane is, this is one of the things that could be done to improve it. I also think that the SFG's should be molded from carbon fiber also. Heck it would be nice if the plane were ALL composite and 2X2 meter in size. Oh well, I guess I can dream. I personally think this is one of the BEST ARF's I have ever seen. It also flies best with the SFG's, IMO. Barry Finck Enola, PA |
RE: Showtime
Hey Guys,
SPUD here-got my first 2 flights in today. Winds were across the field at about 15 mph. So just out to get a feel for the plane. No trim needed, but then again to get it set just right I'll have to wait for a calmer day. Sat there and messed with the engine, didn't refuel, so the first landing was dead sticked. This thing lands as smooth as the UCD's. Rock steady all the way down. No tip stall tedances on mine at all. Second flight landed with power and it was great. Being larger it was easy to see all of its moves, this is a fun plane to watch fly. Did some rolls, up & inv spins. With my snaps I need to dial the ail down a smidge on low rates to clean them up a bit. This is going to be one of my favorites.:D My set up is: OS 120 4C Hitec 635's on ail & ele Hitec 625 on rud Fut 3004 on thr CG 7 3/8" rud servo in tail 3" main wheels Fut 9cap Stock on everything else. Well thats it till Sunday. SPUDs out.............see ya. |
RE: Showtime
:)Spud...Congratulations on getting that bird in the air!!! I find this plane to land very good, even in the wind. Not at all like my Funtana was. Great flying airplane. Hope you like yours as much as I do mine.
Thanks Barry |
RE: Showtime
Nickolas,
Thanks for that Link to the pattern thread!! PS I appologize for spelling Monocoat....Momocoat....should have used spell check! There is some great stuff there! Keep the rubber side down! Magoo |
RE: Showtime
Another heads up...
On my Showtime the fuel tank comes in contect with the upper right motor mount bolt. this could lead to a hole rubbed in the tank if it goes unnoticed. |
RE: Showtime
ORIGINAL: LarryMagoo Nickolas, Thanks for that Link to the pattern thread!! PS I appologize for spelling Monocoat....Momocoat....should have used spell check! There is some great stuff there! Keep the rubber side down! Magoo |
RE: Showtime
DrumBum,
Can you believe that??????????.... I knew it was spelled:) ...kote....I was so focused on putting the M in there instead of the N that just I just finished the word with brain out of gear:D Thanks!!! |
RE: Showtime
I maiden my Showtime with YS 110 today.........I'm impressed. Looks like my Extra 260 will be getting a much needed rest.
|
RE: Showtime
:)dgeorge...Congratulations on a successful maiden flight! Really cool airplanes.
Thansk Barry |
| All times are GMT -8. The time now is 12:10 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.